Scottish Borders · Scotland
Bathroom Resealing in Boleside
Problem with your baths, showers and worktops in Boleside? We remove the old material, prepare the joints and seal them properly.
- Shrunken sealant along the back of a worktop
- Gaps where the bath or tray has moved
- Cracked, shrunken or lifting silicone
Boleside homes and their sealant
Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
Schools such as Galashiels Academy are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s. If you let a flat or house near Galashiels station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Boleside is about 2 miles south of Galashiels, in the Scottish Borders. If you need bathroom resealing in Boleside, please email us at info@mrmastic.co.uk for a quick quote. We cover the Scottish Borders from our Crawley base. We cover 89 towns and villages across the Scottish Borders, from the larger towns to small villages. There’s also a page for Edinburgh, about 29 miles away.
Every address in TD1 is within our area for bathroom resealing, from the main roads to the quietest streets. Neighbouring places we cover for bathroom resealing include Tweedbank (2 miles north-east), Galashiels (2 miles north), Langlee (2 miles north-east), Darnick (2 miles east) and Melrose (3 miles east). Further out, we also cover Hawick (12 miles south), Kelso (14 miles east), Selkirk (3 miles south-west), Jedburgh (13 miles south-east), Wilton (11 miles south) and Innerleithen (10 miles west).
Landmarks near Boleside
For rail, the closest station is Galashiels station, roughly 1.8 miles north. Other landmarks nearby include Borders General Hospital (2.3 miles east) and Old Gala House (1.6 miles north). Open spaces near Boleside include Eildon Mid Hill and Haining Loch.
Bathroom resealing for homes and businesses in Boleside
Sealant that’s mouldy, cracked or peeling is worth sorting before it lets water through. A photo of the joints helps when you drop us a line at info@mrmastic.co.uk, and you will get a clear quote before any work starts. We’re often asked to deal with water getting behind the bath panel and a messy, uneven bead from a previous reseal, on basins & vanity units, sinks & splashbacks and shower trays & enclosures.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are normally the first signs.
We stand behind the work with a one-year guarantee.
- Place
- Boleside (TD1)
- Wider area
- Scottish Borders
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Common questions in Boleside
I let a flat near Galashiels station. Can you help?
Yes. We work for letting agents and landlords as well as homeowners. You can email us at info@mrmastic.co.uk with the details for a clear quote.
Can you do bathroom resealing in Boleside?
Yes, Boleside is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Do you reseal kitchen worktops and sinks too?
Yes. We reseal worktop upstands, sinks and splashbacks, in a kitchen-suitable sealant, matched to the worktop where it’s on show.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access.
Do the sealants smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Which products do you use?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
When can I use the bath or shower again?
Generally after around 24 hours. You’ll get the exact cure time before we leave.
Do you remove the old sealant?
Yes, every time. New sealant will not bond properly to old, so the joint is cleaned back first.
What sealant work can’t fix
We won’t take on work that won’t last, so here’s what sealant can’t put right:
- Failed grout lines across the wall
- A cracked shower tray or bath (that needs repair or replacement)
- Tiles that have come away from the wall
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
Where we work in Boleside
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
The process
Most of a good job is in the preparation, so that is where we spend the time. Joints are cleaned back and dried before anything new goes in. In total, it normally takes half a day or less for one room, longer when the kitchen is included. Outdoor work around Boleside depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Work indoors is not affected.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Try not to wet indoor joints just before the visit
- Tell us if parking is tricky
- Clear items away from the joints we are working on
Get a quote
Every job is quoted individually. Just drop us a line at info@mrmastic.co.uk with the details, and photos are welcome.
Read more
Should I try it myself first?
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Landlords, agents and businesses in Boleside
For anyone letting property in or around Boleside, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Why act early in Boleside
You do not need a new bathroom because the sealant looks bad. Replacing the joint is normally all it takes, provided the bath, tray and tiles are in good order. If we find a deeper problem, you will hear it from us. Around Boleside, water from a failed joint in an older stone home can soak into timber and plaster.
We do not show prices on the website, because the cost depends so much on the job itself. Call for a quick quote.
Why us?
- Sanitary silicone with an anti-fungal additive in wet areas
- Experience in homes, commercial sites and hotels
- Approved under the ARBOMaster scheme
- A sealant colour to suit the surroundings
What affects the quote in Boleside
There’s no set price list. The quote depends on:
- The old material and how stubborn it is
- How many areas need sealing
- Whether there’s mould to deal with
- How much there is to do
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
Helping us quote
Before you ask for a quote, have a think about:
- Where the job is, and your postcode
- Access, such as stairs, a lift or height
- If it’s domestic, commercial or a hotel
- What the problem is, such as mould, gaps, leaks or cracking
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work.
Nearby places to Boleside
Also in Boleside
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Stick to a soft cloth and a mild cleaner
- Keep the fan on for a while after bathing
- Check the joints every few months for splits or lifting
- Do not let bottles sit on the bead
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
Small signs come before a leak: lifting ends, gaps, dark shadows under the bead or a stain downstairs. Any of these means the joint needs attention.