Edinburgh · Scotland
Bathroom & kitchen resealing in Parkgrove, Edinburgh
Baths, showers and worktops in Parkgrove need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Leaking joints on a shower screen
- Cracked, shrunken or lifting silicone
- Black spots spreading through the bead
Bathroom resealing for homes and businesses in Parkgrove
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the bead isn’t stretched the first time someone gets in. Quick jobs often leave it out, and it makes a real difference. We work on wet rooms, basins & vanity units and shower trays & enclosures, and people most often call us about black mould in the silicone that won’t clean off and water getting behind the bath panel.
In Scotland’s cities, including the area around Parkgrove, many older flats had their bathrooms added into small rooms later on. Space is tight and ventilation can be poor, which is hard on sealant and grout.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we will put it right.
- Location
- Parkgrove (EH4, EH12)
- Wider area
- Edinburgh
- Cover
- 12 months on all our work
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Honest limits
Honest advice matters more to us than a booking, so here’s what sealant can’t fix:
- Cracked or missing grout between tiles (that’s regrouting)
- Loose or hollow tiles, or failed tanking behind them
- A tray or bath that’s cracked through
If you are not sure, just email us at info@mrmastic.co.uk and we’ll give you a straight answer.
Where we work in Parkgrove
- Sinks & splashbacks
- Wet rooms
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Kitchen worktops & upstands
Also in Parkgrove
Landlord and commercial work in Parkgrove
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will quote.
For anyone letting property in or around Parkgrove, jobs at different addresses can go on one quote. Send us the addresses and the work at each, and photos by email help.
Bathroom resealing around Parkgrove
Parkgrove is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Edinburgh has a lot of tenement flats, in the Old and New Towns and well beyond, and in a tenement, a leaking seal can reach the neighbours below.
Schools such as Craigmount High School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Parkgrove is about 4 miles west of Edinburgh, in Edinburgh. Wherever you are in the EH4 postcode area, we can carry out bathroom resealing at your property. Across Edinburgh, we cover 175 places, and Parkgrove is one of them.
Jobs for bathroom resealing in EH4 and EH12 is quoted and booked the same way as anywhere else. Whether your property is on Parkgrove Road, Ardshiel Avenue and Queensferry Road or anywhere close by, our applicators can take on the job. Close by, we work in Clermiston (1 mile south-east), Drumbrae (1 mile south), Davidson's Mains (1 mile north-east), Craigcrook (1 mile east) and Silverknowes (1 mile north-east). Larger places within reach include Edinburgh (4 miles east), Leith (5 miles east), Bonnington (5 miles east), Greenside (4 miles east), Broughton (4 miles east) and Bellevue (4 miles east).
Landmarks near Parkgrove
The closest station to Parkgrove is South Gyle station, roughly 1.6 miles south of the centre. A little further out are Murrayfield Experience (2.4 miles south-east) and Corstorphine Hospital (1.4 miles south-east). Not far away are The New Leaf Co-op and Dundas Loch.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Stick to a soft cloth and a mild cleaner
- Keep an eye on the corners, where splits start
- Open a window or run the fan so the room dries
- Move toiletries away from the joint
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
Mould that starts as a few spots spreads through the bead. Once it’s deep in the silicone, cleaning usually will not remove it, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
The process
We keep the work tidy and contained to the joints we are treating, so you can get on with your day. Expect the work to take half a day or less for one room, longer when the kitchen is included, and we tell you how long to leave it before we go. Parking in city streets around Parkgrove can be tight or controlled, so it helps to know about permits or nearby bays. If you are in a flat, let us know how we get in at the street door.
- We look at every joint first and check for movement or leaks.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- The joint is cleaned, degreased and treated for mould.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, normally around 24 hours.
Getting ready for the visit
- For business premises, tell us about site rules or sign-in
- Mention if the joints have been sealed before
- Tell us about any water getting in
How to get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Read more
What affects the cost of bathroom resealing
We don’t publish a price list, because jobs vary so much. The quote depends on:
- The old material and how stubborn it is
- The type of sealant required
- Mould in or behind the old joints
- Access and height
Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear price for the lot.
Asking for a quote
There’s no need for technical detail. Just tell us:
- Photos by email, if that’s easy
- What’s wrong with the joints now
- Any previous sealing or DIY work
- The address or postcode of the job
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, email us at info@mrmastic.co.uk.
Parkgrove: your questions answered
Do you take on hotel work around Parkgrove?
Yes, hospitality work, including hotels, is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Can a failed shower seal in a tenement flat in Parkgrove leak into the flat below?
Yes. With flats above and below, a leak from a failed seal rarely stays in one flat. Cutting out the old sealant and laying a fresh bead puts a stop to it.
How much does bathroom resealing cost in Parkgrove?
The cost depends on the size of the job, access and how much old sealant has to come out. Call for a quick quote and we will talk you through it.
Is it messy?
No. We work neatly, protect the area around the joints and tidy up afterwards.
When can I use the bath or shower again?
Silicone is touch-dry quite quickly, but it takes longer to cure. Leave it around 24 hours before it gets wet, or as long as we advise for that product.
Does someone need to be in?
We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.
Do you do kitchens as well as bathrooms?
Yes, often alongside a bathroom. Next to the sink we use a food-safe product where it’s needed.
Can new silicone go straight over the old?
No. It’s a common reason for reseals failing. The old joint is stripped, cleaned and resealed from scratch.
Signs you need bathroom resealing in Parkgrove
Sealing over old silicone is one of the commonest mistakes we find. Fresh silicone can’t grip the old bead underneath, so it lifts, lets water in and traps mould underneath.
Keep an eye out for these signs:
- A joint torn by a bath that flexes
- Failed sealant on the screen profile
- A bead that has pulled away from the tiles
- Water getting behind the kitchen upstand
Letting a property close to South Gyle station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Comparing quotes
- Whether you can choose the colour
- What happens if the job turns out different
- How long to leave it before use
- Whether the sealant suits the joint
Surface by surface
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A sound joint along the back edge stops that, as long as the worktop itself is firmly fixed.
Shower trays & enclosures
The vertical joint where a screen profile meets the wall is a common leak point. It’s resealed along with the tray joints, following the enclosure maker’s guidance on which side to seal.