Kent · England
Bathroom & kitchen resealing in Maxton, Kent
Bath, shower, basin, wet room, worktop and sink resealing for Maxton, backed by a one-year guarantee. Ask us for a quote.
- Cracked, shrunken or lifting silicone
- Failed sealant on the screen profile
- A reseal done over the top of the old bead
Leave it or put it right?
Running new silicone over the old joint can look tidy for a few weeks, but it cannot stick to what’s underneath. Water creeps under it and mould follows. Around Maxton, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
What you get with us
- We leave the area clean and tidy
- Rated 4.9 stars on Google
- Over 20 years’ experience
- White, clear, grey or another colour, product permitting
Read what affects the cost or what customers say.
Bathroom resealing for homes and businesses in Maxton
It is not only bathrooms. Worktop upstands, sink edges and splashback joints get wet every single day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. If you’re dealing with a bead that has pulled away from the tiles and gaps where the bath or tray has moved, we can help, on wet rooms, sinks & splashbacks and kitchen worktops & upstands alike.
For a small place like Maxton, bathroom resealing is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Place
- Maxton (CT17, CT15)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Maxton
Other services in Maxton
Different surfaces, different methods
Shower trays & enclosures
Shower trays are sealed to the wall, and enclosures are sealed to the tray and tiles. Both get soaked every time the shower runs, so each is cut out and renewed with anti-fungal sanitary silicone.
Kitchen worktops & upstands
Laminate worktops swell if water gets into the core. A sound joint along the back edge stops that, as long as the worktop itself is firmly fixed.
Quotes for bathroom resealing in Maxton
We don’t publish a price list. The quote depends on:
- The product the joint needs
- Working hours on commercial sites
- Any mould that needs treating
- The number and length of the joints
What you pay reflects the work, not a rough estimate. That’s why we ask about the job first and give you a clear quote before work begins.
Helping us quote
To help us quote quickly, let us know:
- Photos by email, if that is easy
- Whether it has been sealed before
- Any access issues, like height or stairs
- Roughly how big the job is
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll explain what’s involved and send you a clear quote.
Bathroom resealing in Maxton: local notes
Maxton is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Letting a property close to Dover Priory station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For an older house near a landmark such as St Martin's Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Maxton is about 1 mile south-west of Tower Hamlets, in Kent. For bathroom resealing in and around Maxton, it’s easy to get a quote: please phone 0345 464 0079 or drop us an email. We cover Kent from our Crawley base. Our Kent coverage runs to 922 places, Maxton among them. You can also see our page for Chelmsford, about 55 miles away.
Our applicators cover all of CT17 and CT15 for bathroom resealing. Streets in the area include Cow Lane, Manor Road and Mount Road. We also cover Aycliffe (1 mile south), Farthingloe (1 mile south-west), Dover (1 mile north), Church Hougham (2 miles west) and River (2 miles north). We also work in nearby towns such as Canterbury (14 miles north-west), Folkestone (6 miles south-west), Deal (8 miles north-east), Hythe (10 miles west), Walmer (7 miles north-east) and Hawkinge (6 miles west).
What’s near Maxton
In Maxton, that means homes and buildings near Crown & Sceptre pub, Astor College for the Arts and St Edmund's Catholic School. Maxton’s nearest station is Dover Priory station, roughly 0.8 miles north-east. A little further out are Old Town Gaol (1 mile north-east) and Dover Castle (1.6 miles east). Open spaces near Maxton include Dover Western Heights.
When something else is needed
Before booking, it’s worth knowing the limits too:
- Failed grout lines across the wall
- Cracks in the tray itself rather than the joint
- A leaking waste, trap or valve
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly before booking.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Basins & vanity units
- Wet rooms
- Shower trays & enclosures
- Baths
- Sinks & splashbacks
Maxton questions
I let a flat near Dover Priory station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.
Will you come out to Maxton?
Yes, we do. We work across London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
How long does the new silicone need before I use the shower?
Silicone is touch-dry quite quickly, but it takes longer to cure. Leave it around 24 hours before it gets wet, or as long as we advise for that product.
Do you have insurance?
Yes. Mr Mastic is fully insured, with over 20 years’ experience in sealant work.
My sealant has gone black. Can you sort it?
Yes. Mould inside the bead rarely cleans out for good, so we cut it out, treat the joint and reseal with anti-fungal silicone.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area.
What does bathroom resealing cost?
It depends on the job, so we quote each one individually. For a quick quote, phone 0345 464 0079 or send us an email with a short description of the job.
What sealant do you use?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.
Common problems we fix in Maxton
Sealant laid on a damp, dusty or greasy joint never bonds properly. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
Keep an eye out for these signs:
- New sealant laid over old sealant that is now lifting
- Water getting behind the kitchen upstand
- Smears of silicone across the tiles
- Water escaping at the shower enclosure
For site and facilities teams at buildings such as St Martin's School, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- What guarantee comes with the work
- Whether you can choose the colour
- Whether VAT is included
- Are they insured?
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
How the visit works
There isn’t much for you to do on the day. Point us to the joints and we will get on with it. The work itself takes a couple of hours for a single bath or shower, including the tidy-up. In a small place like Maxton, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by protecting the area and stripping out the old bead.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, generally around 24 hours.
Getting ready for the visit
- Keep children and pets away from the work area
- For indoor joints, keep the area dry beforehand if you can
- Clear the area around the work
How to get a quote
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.