Kent · England
Fire-rated sealant in Maxton, Kent
Fire rated sealant for Maxton, by sealant specialists with 20+ years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Unsealed gaps around fire door frames
- Gaps flagged on a fire risk assessment
- Fire seals that have cracked with movement
How we handle fire rated sealant in Maxton
Fire stopping only performs as intended if it’s done to the detail: correct depth, correct backing and a product suited to the surfaces. That is the part we focus on, gap by gap. Typical jobs include open gaps behind door architraves and joints picked up in a fire-stopping survey, on pipe & cable gaps, door frames and service penetrations.
If you have holiday lets, a converted barn used for business or a community building near Maxton, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Location
- Maxton (CT17, CT15)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear price before we start
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
Fire rated sealant in Maxton: local notes
For seaside hotels, guest houses and holiday lets around Maxton, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. Workplaces and the common parts of blocks of flats in England need a fire risk assessment under the Regulatory Reform (Fire Safety) Order 2005, and gaps around services are often picked up there. We work to the specification you’re given, installing the product to its tested details.
If you look after a church, hall or community building such as St Martin's Church, gaps around pipes and cables are worth checking after any building work there. Letting a property close to Dover Priory station? Then new cables or pipes through a fire-resisting wall leave a gap that needs the right sealant.
Maxton is about 1 mile south-west of Tower Hamlets, in Kent. For fire rated sealant in and around Maxton, it’s easy to get a quote: please ring 0345 464 0079 or send us an email. We cover Kent from our Crawley base, Maxton included. Maxton is one of 922 places in Kent we cover. Our Chelmsford page covers work nearby (55 miles or so).
Work in CT17 and CT15 works the same way as everywhere else we cover. That includes homes and businesses on Cow Lane, Manor Road and Mount Road and the roads around them. Nearby, we also carry out fire rated sealant in Aycliffe (1 mile south), Farthingloe (1 mile south-west), Dover (1 mile north), Church Hougham (2 miles west) and River (2 miles north). Within a short drive, we also cover Canterbury (14 miles north-west), Folkestone (6 miles south-west), Deal (8 miles north-east), Hythe (10 miles west), Walmer (7 miles north-east) and Hawkinge (6 miles west).
Around Maxton
Around Maxton, our work takes us to homes and buildings near Crown & Sceptre pub, Astor College for the Arts and St Edmund's Catholic School and the streets around them. Maxton’s nearest station is Dover Priory station, roughly 0.8 miles north-east of the centre. Other landmarks nearby include Old Town Gaol (1 mile north-east) and Dover Castle (1.6 miles east). The countryside around Maxton includes Dover Western Heights.
Nearby places to Maxton
Also in Maxton
How we quote for fire rated sealant
For a quick quote, just ask. What matters most is:
- Which sealant suits the joint
- Any working-time requirements on site
- How much old sealant there is and how hard it is to remove
- How much there is to do
A failed joint rarely gets cheaper to fix by waiting. If you are not sure whether it needs doing, ring 0345 464 0079 or email us and we will give you an honest view and a quote.
Helping us quote
When you contact us, these details help:
- Any previous sealing or DIY work
- What’s wrong with the joints now
- Where the property is
- How we’d reach the joints
To get a quote, phone 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.
Surface by surface
Flats and HMOs
Converted houses often have gaps around old and new services. We seal the ones on your specification with a tested product and record where they are.
Masonry and concrete
For masonry and concrete, we use a product tested in that substrate. We clean out dust and debris before sealing so the sealant bonds.
Honest limits
We’d rather tell you now than do work that won’t last, so these are the limits:
- Fire risk assessments, which need a qualified assessor
- Fire doors that need new seals, closers or hardware
- Large holes that need a different fire-stopping system
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before you book.
Where we work in Maxton
- Service penetrations
- Linear gaps
- Door frames
- Flats & HMOs
- Plasterboard & masonry
- Pipe & cable gaps
DIY versus a professional finish
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
When to call us in Maxton
Lots of unsealed gaps appear long after the building was completed. Electricians, plumbers and data installers drill through walls and ceilings and the hole round the new service is not always sealed again.
Most people get in touch when they notice one of these:
- Door frames with gaps between frame and wall
- Holes left by a change of layout
- Gaps around pipes and cables through fire-resisting walls
- Gaps flagged on a fire risk assessment
Schools such as St Martin's School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment.
Comparing quotes
- Whether all the old sealant comes out first
- How the colour is chosen
- Are they insured?
- What the cure time is
Maxton: your questions answered
Will you come out to Maxton?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work for landlords with property near Dover Priory station?
Yes, we work for landlords and agents. Just call 0345 464 0079 or email us and tell us about the property, and we’ll send you a clear quote.
Can ordinary silicone be used in a fire-stopping gap?
No. It looks sealed but won’t perform as fire stopping. A tested fire-rated product is needed and we can apply it for you.
What information do you need?
Tell us what needs doing and where, plus pictures if you have them. If we need more, we’ll ask.
Are you insured?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
What does intumescent mean?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent types expand when heated, and they’re one option among several. The specification and the tested detail decide which is used.
How long will you be here?
A typical job takes a few hours for a handful of gaps, and longer for a whole building, including the preparation. We will confirm how long when we quote.
Will you assess my building’s fire safety?
No. That is for a fire risk assessor, designer or building control. We apply fire-rated sealant to the requirements they set.
How it works
We bring everything the job needs with us. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes a few hours for a handful of gaps, and longer for a whole building. Somewhere like Maxton needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Where the tested detail needs backing or fill, we fit it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
Getting ready for the visit
- Mention any leaks or damp you’ve noticed
- Clear the area around the work
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
For fire rated sealant in Maxton, ring 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you will get a clear quote before we start.
Related advice
Aftercare tips
Joint life depends on how it’s used and looked after. We suggest:
- Keep general-purpose foam and caulk away from fire-stopping gaps
- File the fire-stopping record where your assessor can find it
- Don’t paint over fire sealant until it has cured
- Keep photos of seals that will be hidden
Look at the sealed gaps as part of your routine walk-rounds. Watch for cracking, gaps or seals that have been disturbed and have them put right.
It’s easiest to seal gaps while they’re few and easy to reach. Over time, more work adds more holes and the list grows.