Kent · England
Fire-rated sealant in Aycliffe, Kent
Professional fire rated sealant in and around Aycliffe, with old sealant always removed completely and a 12-month guarantee.
- Open joints along the top of partitions
- New service routes left unsealed after building work
- Seals cut through by electricians, plumbers or data installers
How we handle fire rated sealant in Aycliffe
Until it’s heated, intumescent sealant behaves like an ordinary sealant; then it swells to help close the gap. Which product suits a gap depends on its width, the materials either side and what runs through it, so we work to the manufacturer’s details. If you have gaps around pipes and cables through fire-resisting walls and fire stopping disturbed by later work, we can put it right, on pipe & cable gaps, flats & HMOs and door frames alike.
Work in a small place like Aycliffe is planned ahead, journey included, so the job can fit around bookings, guests or opening times where possible.
We stand behind the work with a one-year guarantee, so you are not left on your own once the job is done.
- Place
- Aycliffe (CT17, CT15)
- Wider area
- Kent
- Guarantee
- 12 months on all our work
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
When something else is needed
It helps to know what we cannot do too:
- Fire risk assessments, which need a qualified assessor
- Openings too large for sealant, which need batts, boards or another system
- Certifying a building or signing off its fire safety
If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before you book.
What we seal
- Pipe & cable gaps
- Door frames
- Flats & HMOs
- Linear gaps
- Service penetrations
- Plasterboard & masonry
How it works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes from a few hours to a few days, depending on the number of gaps and the access. In a small place like Aycliffe, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We begin by agreeing the list of gaps from your assessor’s or designer’s requirements.
- We measure every gap and note what it’s in and what passes through.
- Any non-fire-rated filler is removed.
- The specified fire-rated sealant goes in over any backing its detail requires.
- We hand over a list of locations and products for your files.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any tricky access
- For business premises, tell us about site rules or sign-in
Getting a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you are ready, phone 0345 464 0079 or drop us an email.
Advice
Different surfaces, different methods
Plasterboard walls
Holes in plasterboard are often cut roughly for services. Gaps that are too big for sealant alone need a different detail, and we’ll tell you.
Door frames
Frame gaps are usually hidden behind the architrave. Where it’s open, we seal it to the product’s details for that gap size before the trim goes back.
Towns and villages near Aycliffe
Other services in Aycliffe
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Commercial buildings in Aycliffe
If you run a hotel, guest house or holiday let in a coastal place like Aycliffe, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. There are hotels and other places to stay in and around Aycliffe. Hotel work can be planned room by room, with out-of-hours working where needed.
Schools such as Aycliffe Community Primary School are buildings too, and service openings in fire-resisting walls need checking after any refurbishment. Rented homes near Dover Priory station change hands often, and any gap left by new services in shared walls should be closed with a fire-rated product. Community buildings like Aycliffe Church Centre are part of the picture too: gaps around pipes and cables are worth checking after any building work there.
Aycliffe is about 1 mile south of Tower Hamlets, in Kent. For fire rated sealant in and around Aycliffe, please call 0345 464 0079 or email us for a quick quote. We are based in Crawley and cover Kent, Aycliffe included. Across Kent, we cover 922 places, and Aycliffe is one of them. There’s also a page for Chelmsford, about 55 miles away.
Postcode districts we cover here for fire rated sealant: CT17 and CT15. Whether your property is on Manor Road, Mount Road and Rugby Road or anywhere close by, our applicators can take on the job. We also cover the places around Aycliffe: Maxton (1 mile north), Farthingloe (1 mile north-west), Church Hougham (2 miles west), Dover (2 miles north) and River (2 miles north). We also work in nearby towns such as Canterbury (15 miles north-west), Folkestone (6 miles west), Deal (8 miles north-east), Hythe (10 miles west), Walmer (8 miles north-east) and Hawkinge (6 miles west).
Near you in Aycliffe
Locally, jobs take us to homes and businesses close to Crown & Sceptre pub, Western Heights LNR and Astor College for the Arts, among other places. Aycliffe’s nearest station is Dover Priory station, roughly 1.1 miles north-east. Well-known places in the area include Royal Victoria Hospital (1.3 miles north-east) and Old Town Gaol (1.3 miles north-east). The countryside around Aycliffe includes Dover Western Heights.
What happens if it’s left?
Leaving a gap until a refurbishment comes round can mean years with it open. Sealing the gap now is a contained job on its own. In a small place like Aycliffe, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Why us?
- One-year guarantee on every job
- Arbo and Everbuild products
- An ARBOMaster approved applicator
- Domestic, commercial and hotel work
See what affects the cost and customer reviews.
Aftercare tips
How long the joints last depends on use and care. We suggest:
- Make resealing part of every contractor’s brief
- Check whether a sealant can be painted before decorating over it
- Look in service cupboards and ceiling voids from time to time
- Store the list of sealed gaps with your building paperwork
Tell other trades that the gaps have been sealed, and make sure anything they disturb is resealed with a suitable product. A lot of damaged fire stopping comes from later work.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
Aycliffe questions
Do you take on hotel work around Aycliffe?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Do you cover smaller places like Aycliffe?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are glad to have it sorted.
Where do you work from?
Mr Mastic is based in Crawley. We cover Aycliffe and the rest of Kent.
Will you leave a mess?
No. We protect the surfaces around the joints, and we clear up the old sealant and our materials before we leave.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Is intumescent sealant the same as fire-rated sealant?
Fire-rated is the broad term for sealants tested for fire stopping. Intumescent ones swell in heat, and they’re one of the options. The specification and the tested detail decide which is used.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
How we quote for fire rated sealant
For a quick quote, just ask. The main things that affect it are:
- How many areas need sealing
- Any mould that needs treating
- The old material and how stubborn it is
- How easy the joints are to reach
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will go through it with you.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- The rough size of the job
- The type of property
- If someone has resealed it before
- Pictures of the joints, sent by email
For a quote, call 0345 464 0079 or email us with the location and a short description of the problem. We will give you a clear price before any work starts.