Kent · England
External & façade joints in Aycliffe, Kent
Movement joints in Aycliffe need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Sealant that has lost its bond to the brick or render
- Old sealant gone brittle and cracked
- Rigid filler in a joint that should flex
External mastic in Aycliffe, done properly
Getting the depth right is half the job. Closed-cell backing rod sets the depth and stops the sealant sticking to the back, so it bonds to the two sides only and can stretch. If you have movement joints with cracked, split or missing sealant and failed seals between different materials, we can help.
Somewhere as small as Aycliffe, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Joints on those walls need a sealant that moves with the building and stays in place.
Each job carries a 12-month guarantee, whatever its size.
- Place
- Aycliffe (CT17, CT15)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
How the visit works
There’s no need to move everything out, just the space around the work. Everything nearby is protected, and the job takes a few hours for a handful of joints, longer for a whole elevation in most cases. Somewhere like Aycliffe needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First we look over the joints with you, agree which to renew and talk through access.
- Old sealant and any debris are cut and raked out.
- We clean both faces of the joint and prime them where the product calls for it.
- We push in closed-cell backing rod so the sealant is the right depth and bonds to the sides only.
- The new sealant, chosen to suit the brick or render, is applied and tooled to a neat finish.
Getting ready for the visit
- Mention any parking rules near the property
- Plan for the work area to be out of bounds to pets and children
- Mention any leaks or damp you’ve noticed
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and email photos if that’s easy.
Advice
What external mastic looks like in Aycliffe
Aycliffe is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on movement joints and outside wall joints, especially on the side facing the sea. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
Managing a site like Aycliffe Community Primary School? Then its movement joints, gutters and trims need looking after like any other building’s. In the older streets around Aycliffe Church Centre, an extension built onto an older house moves differently, and the joint between them takes the strain.
Aycliffe is about 1 mile south of Tower Hamlets, in Kent. For external mastic in and around Aycliffe, please ring 0345 464 0079 or drop us an email for a quick quote. We’re based in Crawley and cover Kent, Aycliffe included. Aycliffe is one of 922 towns and villages in Kent we cover for external mastic. You can also see our page for Chelmsford, roughly 55 miles from Aycliffe.
We cover every part of CT17 and CT15 for external mastic. That includes homes and businesses on Manor Road, Mount Road and Rugby Road and the roads around them. Other places close to Aycliffe include Maxton (1 mile north), Farthingloe (1 mile north-west), Church Hougham (2 miles west), Dover (2 miles north) and River (2 miles north). Within a short drive, we also cover Canterbury (15 miles north-west), Folkestone (6 miles west), Deal (8 miles north-east), Hythe (10 miles west), Walmer (8 miles north-east) and Hawkinge (6 miles west).
What’s near Aycliffe
Around Aycliffe, our work takes us to homes and buildings near Crown & Sceptre pub, Western Heights LNR and Astor College for the Arts. Aycliffe’s nearest station is Dover Priory station, roughly 1.1 miles north-east of the centre. Well-known places in the area include Royal Victoria Hospital (1.3 miles north-east) and Old Town Gaol (1.3 miles north-east). Not far away are Dover Western Heights.
Towns and villages near Aycliffe
Other services in Aycliffe
What happens if it’s left?
Resealing a run of joints in one go is normally better than patching one at a time. They’ve weathered the same way, and access only has to be arranged once. Older cottages and farmhouses around Aycliffe can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why us?
- 180+ five-star Google reviews
- Quality sealants from Arbo and Everbuild
- A choice of colours where the product allows
- You choose the colour before work begins
See what affects the cost and customer reviews.
When it isn’t the sealant
We’ll always be straight with you, so here’s what new sealant won’t do:
- Movement that is more than a sealant joint can take
- Walls that need new movement joints cut into them
- Loose or hollow render, which needs re-rendering
If in doubt, ring 0345 464 0079 or send us an email and we will say what we think.
What we seal
- Copings & trims
- Render & cladding joints
- Concrete & block
- Façade panels
- Brickwork movement joints
- Joints between brick and frames
When to call us in Aycliffe
Some movement joints have been pointed up with mortar, often by someone who didn’t know what it was for. The joint cannot move, so the wall cracks somewhere else instead.
Signs it’s time to call us include:
- Plants rooting in failed movement joints
- Joints pointed up with cement by mistake
- Brick movement joints where the sealant has split
- Weathered mastic that no longer stretches
For landlords with property near Dover Priory station, split movement joints are easy to miss on a rental until damp shows inside.
What to look for in a quote
- How the joint is cleaned and prepared
- What the cure time is
- Is VAT in the price?
- Whether they seal over old material or remove it
Questions from Aycliffe
Is Aycliffe within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is external mastic in a coastal place like Aycliffe any different?
Near the sea, outside joints face more wind, rain and salt than they would inland, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.
Do you work for landlords and businesses?
Yes. We work in homes, commercial premises and hotels, and we are fully insured.
How do I get a quote for external mastic in Aycliffe?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
How long does the job take?
Most jobs take anything from a few hours to several days, depending on the building, including the preparation. We will confirm how long when we quote.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned before resealing.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
How do you reach high-level joints?
It depends on the building. Send us pictures and a rough idea of the height, and we’ll confirm what access is needed.
DIY versus a professional finish
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Avoid pressure-washing directly into sealant joints
- Clear growth from the base of walls and joints
- Get split or bare joints resealed while the damage is small
- Never let anyone fill a movement joint with mortar
Avoid pressure-washing straight into the joints. A strong jet can damage the edges of the bead over time.
A joint that has stopped moving pushes the movement elsewhere, often as cracks near the joint. Resealing it early helps prevent that.
What affects the quote in Aycliffe
Some jobs are bigger than they look, and some smaller. The main factors:
- When we can work, for business premises
- How many rooms, windows or areas are involved
- The number and length of the joints
- Access and height
The cost reflects the work involved, not guesswork. That’s why we ask about the job first.
Asking for a quote
When you call or email, it’s useful to know:
- Where the job is, and your postcode
- Photos by email, if that’s easy
- The type of property
- If someone has resealed it before
It all starts with a short chat. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or send us an email.