Kent · England
Bathroom & kitchen resealing in Marley, Kent
Baths, showers and worktops in Marley need attention? We remove the old material, prepare the joints and seal them properly.
- Damp behind the bath or under the tray
- Black mould in the silicone that will not clean off
- Gaps where the bath or tray has moved
Honest limits
We will not take on work that will not last, so these are the limits:
- A tray that rocks until it’s re-bedded
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- Loose or hollow tiles, or failed tanking behind them
Not sure which it is? You can ring 0345 464 0079 or send us an email and we’ll tell you honestly.
Surfaces we seal
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Sinks & splashbacks
- Shower trays & enclosures
- Wet rooms
How we handle bathroom resealing in Marley
A reseal only lasts if the joint is properly prepared. The old sealant is removed to the last smear, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. If you’re dealing with a messy, uneven bead from a previous reseal and splits where the tray meets the wall, we can help, on basins & vanity units, sinks & splashbacks and baths alike.
In a village or hamlet like Marley, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Our work is backed for twelve months, in Marley and everywhere else we cover.
- Where
- Marley (CT14)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Also near Marley
What else we do in Marley
Questions from Marley
Do you cover Marley for bathroom resealing?
Yes. We work across London and the South East, and Marley is part of that. You can call 0345 464 0079 or email us and tell us what needs doing.
Is Marley within the area you cover?
Yes, Marley is covered. We work across London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Where are you based?
We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.
How long before the new sealant can get wet?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or follow the cure time we give you.
Can I do it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Do you have insurance?
Yes. Full insurance covers our work, and we can confirm the details when we quote.
Can tenants book the work?
We can work for tenants, landlords or agents. Just make sure your landlord agrees.
Can I choose the colour of the sealant?
There’s a choice: white, clear and colours to suit tiles and worktops. We can help you pick when we quote.
Bathroom resealing around Marley
Marley is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Letting a property close to Sandwich station? Then fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For an older house near a landmark such as Church of St Augustine, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Schools such as Northbourne Church of England Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Marley is about 3 miles north-west of Deal, in Kent. Our applicators cover bathroom resealing for homes and businesses in Marley and nearby. 922 places in Kent are on our list, from the larger towns to small villages. For nearby work, see our Chelmsford page (51 miles or so).
We work across the CT14 postcode area for bathroom resealing and the streets around it. If you need bathroom resealing at a property on Broad Lane and Marley Lane or a nearby road, our applicators can take on the job. Nearby, we also carry out bathroom resealing in Finglesham (1 mile north-east), Hacklinge (1 mile north-east), Northbourne (1 mile south), Ham (1 mile north-west) and Sholden Meadows (1 mile south-east). Larger places within reach include Canterbury (12 miles west), Margate (10 miles north), Dover (7 miles south), Folkestone (13 miles south-west), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Around Marley
Locally, jobs take us to homes and businesses close to Ham Fen, Sandwich Technology School and The Crown Inn. Marley’s nearest station is Sandwich station, about 2.5 miles north. Nearby you’ll also find Sandown Castle (2.7 miles east) and Kent Museum of the Moving Image (2.6 miles east). For a walk, there’s Monk's Wall nature reserve.
Why deal with it now?
Tired sealant isn’t a reason to replace a bath or shower. Replacing the joint is generally all it takes, as long as the fittings themselves are sound. If something else is wrong, we will tell you. In a small place like Marley, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
The cost depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before we start, so you know where you stand.
Why us?
- Domestic, commercial and hotel work
- One-year guarantee on every job
- Colour picked to suit the job
- You choose the colour before work begins
See how sealant jobs are priced and our reviews.
What affects the quote in Marley
There’s no set price list, because no two jobs are the same. The quote depends on:
- Whether there’s mould to deal with
- The number of rooms or windows
- When we can work, for business premises
- How much there is to do
Rather than a set price list, we price the job in front of us: how many joints, what’s in them now and how we reach them. The price is agreed before we begin.
Asking for a quote
A few details help us give you an accurate quote. When you ask for a quote, tell us:
- How we’d reach the joints
- Any previous sealing or DIY work
- What’s wrong with the joints now
- Pictures of the joints, sent by email
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Marley and across Kent. We can quote a run of properties together, and we are fully insured for the work.
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
How the job changes by surface
Wet rooms
If a wet room leaks, the cause may be the tanking or the drain rather than the joints. We reseal the joints and will tell you if the water seems to be coming from somewhere else.
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A sound joint along the back edge stops that.
Keeping the joints in good condition
No joint lasts for ever, but care makes a real difference. A few tips:
- Let new sealant cure fully before it gets wet
- Run the extractor fan during and after every shower
- Never pick at the silicone with a blade
- Don’t let bottles sit on the bead
Do not stand bottles along the bead, because they trap water against the silicone. Squeegeeing the walls and tray after use keeps water from sitting on the joint.
Do not wait for a refit to deal with failed sealant. Sealant is a maintenance item, like the paint on a window frame, and renewing it as soon as it fails protects everything around it.
How the visit works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a couple of hours for a single bath or shower from start to finish. Somewhere as small as Marley, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We cover the area around the joints we’re working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Try not to wet indoor joints just before the visit
- Let us know about earlier repairs to the joints
How to get a quote
For a quote, call 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before any work starts.