Moray · Scotland
Bathroom Resealing in Longmorn
Problem with your baths, showers and worktops in Longmorn? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Water escaping at the shower enclosure
- Splits where the tray meets the wall
- Water getting behind the kitchen upstand
What sealant work can’t fix
We will always be straight with you, so here’s what sealant cannot fix:
- Water getting in through the grout rather than the sealant
- Leaks from a shower valve, waste or pipework (a plumber’s job)
- A bath or tray that moves because it is not properly supported
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.
Joints and surfaces we work on
- Wet rooms
- Baths
- Kitchen worktops & upstands
- Basins & vanity units
- Sinks & splashbacks
- Shower trays & enclosures
How we handle bathroom resealing in Longmorn
Across Longmorn, the joints we reseal are the ones that fail in any home: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. If you are dealing with two layers of silicone, both failing and damp behind the bath or under the tray, we can help, whatever the surface.
For a place like Longmorn, the job is the same as anywhere: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Longmorn (IV30)
- Region
- Moray
- Cover
- 12 months on all our work
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What we do, step by step
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and tidy away. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere like Longmorn may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- We look at every joint first and check for movement or leaks.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- The joint is cleaned, degreased and treated for mould.
- With the joint dry, and any bath loaded with water, a single bead of anti-fungal silicone is applied.
- The bead is tooled smooth and you are told the cure time, usually around 24 hours.
How to prepare
- Mention if the joints have been sealed before
- Mention any tricky access
- Let us know if you’ve seen damp or leaks
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Related advice
Questions from Longmorn
Do you work for landlords with property near Elgin station?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Longmorn?
Yes, we do. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do I need to be at home?
It depends on the job. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
Do you reseal kitchen worktops and sinks too?
Yes. Where it’s needed by the sink, we use a food-safe sealant.
Are you insured?
Yes. We are fully insured.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done.
What does bathroom resealing cost?
Every job is different, so each one gets its own quote. To get one, email us at info@mrmastic.co.uk with a short description of the job.
Is there any odour?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
How to look after the new joints
Looking after new joints is easy:
- Wipe the sealant dry after showering
- Avoid abrasive pads on the sealant
- Check the joints every few months for splits or lifting
- Keep the fan on for a while after bathing
Clean the silicone with care: a mild bathroom cleaner and a soft cloth is enough. Scourers and blades can nick the surface, because a damaged bead gives mould a foothold.
A failed kitchen joint is easy to miss. Splashes run behind the back edge and soak into the worktop, where it can make the board swell. A reseal in time can save the worktop.
What affects the quote in Longmorn
Some jobs are bigger than they look, and some smaller. The main factors:
- The size of the job
- Whether there’s mould to deal with
- The old material and how stubborn it is
- The number of rooms or windows
Leaving a failed joint generally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
What we need to know
Photos by email are helpful but not essential. Please mention:
- The address or postcode of the job
- Whether it has been sealed before
- Photos by email, if that is easy
- The problem you’ve noticed
It all starts with a short chat. Describe the problem, the location and the size of the job. Whenever you’re ready, send an email to info@mrmastic.co.uk.
Longmorn homes and their sealant
Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Managing a site like Elgin High School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Longmorn is about 3 miles south-east of Elgin, in Moray. Whether you’re in the middle of Longmorn or further out, bathroom resealing is available for homes and businesses alike. 58 places in Moray are on our list, from the larger towns to small villages. Our Aberdeen page covers work nearby.
Postcode districts we cover here for bathroom resealing: IV30. Other places close to Longmorn include Fogwatt (1 mile south), Thomshill (1 mile west), Hallowood (2 miles north-east), Ashgrove (2 miles north) and Elgin (3 miles north-west). Larger places within reach include Buckie (13 miles east), Forres (12 miles west), Lossiemouth (8 miles north), Keith (13 miles east), Burghead (10 miles north-west) and Fochabers (7 miles east). If you’re somewhere remote, the job takes a little more planning.
What’s near Longmorn
The closest station to Longmorn is Elgin station, roughly 2.7 miles north-west. Well-known places in the area include Dr Gray's Hospital (3.1 miles north-west) and St Giles Centre (3.1 miles north-west). For a walk, there’s Findlay's Seat.
When to call us in Longmorn
Sealing over old silicone is one of the commonest mistakes we find. Fresh silicone cannot grip the old bead underneath, so it peels, leaks and hides mould behind it.
Look out for any of the following:
- Water getting behind the bath panel
- Leaking joints on a shower screen
- Cracked, shrunken or lifting silicone
- Lumpy, uneven sealant from a DIY attempt
Letting a property close to Elgin station? Then a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Before booking anyone
- How much experience the applicator has
- How hidden problems are handled
- Which colour the sealant will be
- What the quote includes, VAT included or not
More services for Longmorn
Landlord and commercial work in Longmorn
We also work for property managers and facilities teams in Longmorn and across Moray. We can quote a run of properties together.
Failed sealant is one of the commonest items on a check-out report. Several properties can be quoted together.
Why it’s worth doing now in Longmorn
Most of the work in a good reseal happens before any silicone goes on: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Combining jobs into one visit generally makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll give you a clear price for the lot.
Why choose Mr Mastic in Longmorn
- Old sealant always removed completely
- White, clear, grey or another colour, product permitting
- Anti-fungal silicone where joints get wet
- We agree the colour with you first
Take a look at our cost guide or our reviews.