Isle of Wight · England
Hunny Hill Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for Hunny Hill, backed by a 12-month guarantee. Call for a quick quote.
- Smears of silicone across the tiles
- Water getting behind the kitchen upstand
- Black mould in the silicone that will not clean off
How to look after the new joints
Good habits help new joints last longer. Our tips:
- Avoid abrasive pads on the sealant
- Run the extractor fan during and after every shower
- Dry the bead with a towel now and then
- Don’t leave water standing on kitchen joints
Treat the new bead gently when you clean: warm soapy water and a soft cloth do the job. Avoid scouring pads and anything sharp, because a damaged bead gives mould a foothold.
Do not wait for a refit to deal with failed sealant. Like paintwork, sealant needs renewing from time to time, and renewing it as soon as it fails protects everything around it.
Bathroom resealing for homes and businesses in Hunny Hill
The secret of a lasting bead is the preparation. The old sealant is removed to the last smear, then the joint is cleaned, degreased and treated for mould. Only once it’s dry does the new bead go on. If you are dealing with mouldy sealant that has gone black and splits where the tray meets the wall, we can help, whatever the surface.
Homes around Hunny Hill range from older cottages to more recent houses. Older homes can move a little with the seasons, which is hard on tired sealant and rigid grout.
We stand behind the work with a one-year guarantee.
- Location
- Hunny Hill (PO30, PO31, PO41)
- Region
- Isle of Wight
- Cover
- 12 months on all our work
- Quotes
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Hunny Hill
What else we do in Hunny Hill
Hunny Hill questions
Is Hunny Hill in your area for bathroom resealing?
Yes, Hunny Hill is within the area we cover. Our work covers London and the South East. You can phone 0345 464 0079 or email us and tell us what needs doing.
Do you cover smaller places like Hunny Hill?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you have insurance?
Yes. We are fully insured, and we have been doing sealant work for more than 20 years.
Where is Mr Mastic based?
We are based in Crawley, and we cover South East England, London and all of Scotland.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
What do you need from me for a quote?
Let us know what needs doing and where, plus photos if you have them. We will ask anything else we need to know.
How long does the new silicone need before I use the shower?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Keep water off it for around 24 hours, or as long as we advise for that product.
Can landlords and businesses book you?
Yes, we do. Domestic, commercial and hotel work are all part of what we do, and we’re fully insured.
Hunny Hill homes and their sealant
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings. There are hotels and other places to stay in and around Hunny Hill. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
Around Hunny Hill, as everywhere, bathroom resealing is only as good as the preparation behind it.
Hunny Hill is about 1 mile north of Newport, in the Isle of Wight. Whether you are in the middle of Hunny Hill or further out, bathroom resealing is available for homes and businesses alike. Our the Isle of Wight coverage runs to 125 places, Hunny Hill among them. You can also see our page for Portsmouth, roughly 12 miles from Hunny Hill.
All of PO30, PO31 and PO41 is covered for bathroom resealing, from the main roads to the quietest streets. If you need bathroom resealing at a property on Foxes Road, Chain Lane and Wilver Road or anywhere close by, we can help. You’ll find Hunny Hill on the A3020 and A3054, which makes it straightforward to reach with everything needed for bathroom resealing. We also cover the places around Hunny Hill: Parkhurst (1 mile north), Forest Side (1 mile west), Noke Common (1 mile north), Northwood (3 miles north) and Porchfield (3 miles west). We also work in nearby towns such as Ryde (6 miles east), Cowes (4 miles north), Sandown (7 miles south-east), Shanklin (7 miles south-east), Ventnor (9 miles south-east) and East Cowes (3 miles north). As one of the bigger places in the Isle of Wight, Hunny Hill has every kind of property, from flats to offices. If you are somewhere remote, a little more planning is needed.
What’s near Hunny Hill
Locally, jobs take us to homes and businesses close to Seaclose Park, Carisbrooke College and The Man in the Moon pub. Well-known places in the area include Carisbrooke Castle (1.3 miles south-west) and Isle of Wight Music Museum (under half a mile south-east). The countryside around Hunny Hill includes Mill Hill and Briddlesford Nature Reserve.
Different surfaces, different methods
Wet rooms
Not every wet room leak is a sealant problem. We check the joints and say so if the fault looks to be elsewhere.
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows, so the line doesn’t stand out.
Do you need bathroom resealing in Hunny Hill?
Older sealant shrinks and hardens. Along worktops it tends to pull back from the wall, leaving a thin gap where water and food collect. Hot pans and harsh cleaners do not help.
These are the problems we are asked about most:
- Failed sealant on the screen profile
- Two layers of silicone, both failing
- Lumpy, uneven sealant from a DIY attempt
- A joint torn by a bath that flexes
Managing a site like Hunnyhill Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Before you book anyone
- How the surfaces are prepared before sealing
- What the cure time is
- Are they insured?
- Which colour the sealant will be
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
The process
We bring everything the job needs with us, so you do not need to buy or prepare anything. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes two to three hours for a typical bath, depending on how much old sealant there is. A visit to Hunny Hill is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- We protect the area and cut out all of the old sealant.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Mention if the joints have been sealed before
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will explain how we’d tackle it. When it suits you, phone 0345 464 0079 or email us.
Read more
Honest limits
Sealant isn’t the answer to every problem, and we will tell you before any work starts. Sealant will not put right:
- Water coming from the plumbing rather than the joint
- Tiles that have come away from the wall
- Cracks in the tray itself rather than the joint
If you’re not sure, just phone 0345 464 0079 or send us an email and we’ll give you a straight answer.
Surfaces we seal
- Shower trays & enclosures
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Wet rooms
- Sinks & splashbacks
Should I try it myself first?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.