North Lanarkshire · Scotland
Greenrigg Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Greenrigg. ARBOMaster approved applicators, fully insured, with a one-year guarantee.
- Two layers of silicone, both failing
- Mouldy sealant that has gone black
- A bead that has pulled away from the tiles
Bathroom resealing in Greenrigg, done properly
Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it into walls, panels and floors. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We work on kitchen worktops & upstands, wet rooms and shower trays & enclosures, and people most often call us about leaks into the floor or ceiling below and black mould in the silicone that won’t clean off.
Bathrooms in smaller places like Greenrigg work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
You are covered for a year from the day we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.
- Location
- Greenrigg (ML7)
- Wider area
- North Lanarkshire
- Guarantee
- 12 months on all our work
- Quote
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so just mention it when you contact us.
Different surfaces, different methods
Sinks & splashbacks
Where a splashback meets the worktop, there’s a joint that catches every splash. We renew it in clear, white or a matched colour.
Wet rooms
Wet rooms rely on sound joints at floor and wall junctions. They get anti-fungal sanitary silicone, and our work is on the visible joints only.
For landlords and businesses
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we’re fully insured for the work.
Greenrigg questions
Can you help a landlord with a rental near Blackridge station?
Yes, landlords and agents are among the people we work for. Just send an email to info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear price.
Do you cover Greenrigg for bathroom resealing?
Yes, Greenrigg is within the area we cover. We work across all of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Do you work for hotels and businesses?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. Working times can be discussed when we quote.
Do I need to be at home?
That depends on where the joints are. Inside work needs someone to give us access, and for outside work we’ll agree access with you when we book.
Is it OK to put new sealant on top of the old bead?
No, never. A bead laid over old silicone soon starts to come away. We remove the old bead completely before resealing.
Where are you based?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
What should I tell you?
Just the basics: where it is, what you’ve noticed and how we reach it. Then send an email to info@mrmastic.co.uk.
How do I get a quote for bathroom resealing in Greenrigg?
Every job is different, so each one gets its own quote. For a quick quote, drop us a line at info@mrmastic.co.uk and let us know what needs doing and where.
How it works
On the day, there’s very little for you to do. Show us the job and we will take it from there. The work itself takes a morning or an afternoon for most single baths and showers. Somewhere like Greenrigg may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- We tidy up and give you the cure time, generally around 24 hours.
Before we arrive
- On commercial sites, let us know about site rules
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add photos by email if you can.
Related advice
Also near Greenrigg
More services for Greenrigg
How we quote for bathroom resealing
For a quick quote, just ask. The main things that affect it are:
- When we can work, for business premises
- Mould in or behind the old joints
- How many areas need sealing
- The type of sealant required
Leaving a failed joint normally makes the job bigger, not smaller, because water and mould keep working on it. If you are not sure whether it needs doing, send an email to info@mrmastic.co.uk and we’ll give you an honest view and a quote.
What to tell us for a quote
What to tell us when you ask for a quote:
- Where the property is
- The rough size of the job
- How we’d reach the joints
- What’s wrong with the joints now
We quote each job on its own. Simply email us at info@mrmastic.co.uk and describe the job, and pictures are welcome.
Aftercare tips
After the cure time, these simple habits help:
- Give the silicone its full cure time
- Keep an eye on the corners, where splits start
- Don’t leave water standing on kitchen joints
- Open a window or run the fan so the room dries
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the silicone gets a chance to dry.
Each shower pushes a little more water through a failed joint. Left alone, it soaks into the floor, the wall behind the tiles or the ceiling below. Resealing early stops it.
Bathroom resealing around Greenrigg
In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that does not dry out.
If you let a flat or house near Blackridge station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Greenrigg is about 2 miles west of Whitburn, in North Lanarkshire. We carry out bathroom resealing for homeowners, landlords and businesses in Greenrigg and the surrounding area. Our area takes in 89 places across North Lanarkshire, from the larger towns to small villages. We also work in Glasgow, around 21 miles away.
Work in ML7 works the same way as everywhere else we cover. Whether your property is on Dyke Road, Park Road and Stanley Road or a nearby road, we can help. If you’re just outside Greenrigg, we cover Harthill (1 mile west), Eastfield (1 mile west), Westrigg (2 miles north), Blackridge (2 miles north-west) and Fauldhouse (3 miles south-east). We also work in nearby towns such as Motherwell (10 miles south-west), Cumbernauld (12 miles north-west), Coatbridge (11 miles west), Airdrie (9 miles west), Wishaw (9 miles south-west) and Bellshill (11 miles west).
Landmarks near Greenrigg
The closest station to Greenrigg is Blackridge station, about 1.6 miles north of the centre. A little further out are Bathgate Castle (4.8 miles north-east) and Blackridge Community Museum (1.7 miles north-west). Not far away are Black Loch.
Common problems we fix in Greenrigg
Black mould is behind a lot of resealing. Steamy rooms that don’t dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
If you can see any of these, it’s time to have the joints looked at:
- Black mould in the silicone that will not clean off
- Cracked, shrunken or lifting silicone
- Gaps between the worktop and the wall
- Failed sealant on the screen profile
If you look after a building such as Armadale Academy, we reseal washrooms and kitchens in schools and businesses as well as homes.
Questions to ask before you book
- Whether you can choose the colour
- How hidden problems are handled
- Whether the sealant suits the joint
- Is the old sealant removed completely?