Highland · Scotland
Bathroom & kitchen resealing in Easter Kinkell, Highland
Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Easter Kinkell. Fully insured, ARBOMaster approved and guaranteed for a year.
- A joint torn by a bath that flexes
- Water escaping at the shower enclosure
- Shrunken sealant along the back of a worktop
Bathroom resealing in Easter Kinkell
Homes in Easter Kinkell have the same weak spots as anywhere else: the long edge of the bath, the base of the shower tray, the back of the basin and the line along the worktop. Every joint is cut out, cleaned and left dry before it’s resealed. We work on sinks & splashbacks, baths and shower trays & enclosures, and the jobs we see most are two layers of silicone, both failing and a messy, uneven bead from a previous reseal.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
There’s a 12-month guarantee on every job.
- Location
- Easter Kinkell (IV7)
- Wider area
- Highland
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Work for landlords, hotels and businesses
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Landlords and agents in Easter Kinkell can book us as well as householders. Resealing between tenancies is a simple way to keep a property in good order.
Also near Easter Kinkell
More services for Easter Kinkell
Keeping the joints in good condition
A little care helps the new joints last. Our advice:
- Avoid abrasive pads on the sealant
- Move toiletries away from the joint
- Squeegee the walls and tray after use
- Check the joints every few months for splits or lifting
Don’t stand bottles along the bead, as they hold water against it. Squeegeeing the walls and tray after use helps the joint dry.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. Resealing before that happens protects the worktop.
Leave it or put it right?
Sorting it now is quick: the work takes two to three hours for a typical bath, depending on how much old sealant there is. Left until water gets through, the job can grow to lifting panels, drying out and decorating. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Why Easter Kinkell customers choose us
- A sealant colour to suit the surroundings
- White, clear, grey or another colour, product permitting
- We are fully insured
- 4.9 on Google from 180+ five-star reviews
See how sealant jobs are priced and our reviews.
What the job involves on each surface
Kitchen worktops & upstands
Kitchen joints need more degreasing than bathroom ones, since cooking leaves a film that stops silicone sticking. The extra cleaning is what makes the bead last.
Basins & vanity units
The back of a basin gets wet every time someone washes. Corners behind basins are where mould tends to start, and we treat it exactly as we would a bath.
When to call us in Easter Kinkell
Sealing over old silicone is one of the commonest mistakes we find. New silicone won’t bond to old silicone, so it lifts, lets water in and traps mould underneath.
Any of these means the joints need attention:
- Water escaping at the shower enclosure
- Gaps between the worktop and the wall
- Water getting behind the bath panel
- A reseal done over the top of the old bead
Rented homes near Conon Bridge station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Before you book anyone
- Who does the work, and how experienced they are
- What guarantee comes with the work
- What the cure time is
- Which colour the sealant will be
How the visit works
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. In total, it usually takes two to three hours for a typical bath, depending on how much old sealant there is. For a place like Easter Kinkell, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- First the area is protected and every bit of old sealant removed.
- The joint is cleaned, degreased and treated for mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- A single bead of anti-fungal sanitary silicone is applied and tooled smooth.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- Move anything stored near the joints
- On commercial sites, let us know about site rules
- Try not to wet indoor joints just before the visit
Get a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand.
Read more
What affects the quote in Easter Kinkell
Call for a quick quote. The main things that affect it are:
- Whether there’s mould to deal with
- How many rooms, windows or areas are involved
- Whether old sealant or filler has to be cut out
- The product the joint needs
A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you are unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
Helping us quote
What to tell us when you ask for a quote:
- How many joints, rooms or windows are involved
- Pictures of the joints, sent by email
- The type of property
- The address or postcode of the job
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, drop us a line at info@mrmastic.co.uk.
Easter Kinkell: your questions answered
Will you come out to Easter Kinkell?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
I let a flat near Conon Bridge station. Can you help?
Yes. We work for landlords and agents as well as homeowners. Just drop us a line at info@mrmastic.co.uk with the address and what needs doing, and we will give you a clear quote.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
What colours of sealant can you use?
You are not limited to white: clear, white and colours chosen to suit the room. We will talk it through when we quote.
What does bathroom resealing cost?
Size, access and the old material all affect the cost. Ask us for a quote and we will talk you through it.
Is it OK to put new sealant on top of the old bead?
No, never. A bead laid over old silicone soon starts to come away. We remove the old bead completely before resealing.
Where are you based?
We’re a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Getting it wet too early can spoil the new joint.
Bathroom resealing in Easter Kinkell: local notes
Easter Kinkell is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Around Easter Kinkell, as everywhere, bathroom resealing is only as good as the preparation behind it.
Easter Kinkell is about 9 miles north-west of Inverness, in Highland. Whether you are in the middle of Easter Kinkell or further out, bathroom resealing is available for homes and businesses alike, from flats and houses to offices and hotels. Easter Kinkell is one of 253 places in Highland we cover.
Jobs for bathroom resealing in IV7 works the same way as everywhere else we cover. Main roads around Easter Kinkell include the B9169, so getting to you is simple. Nearby, we also carry out bathroom resealing in Conon Bridge (2 miles west), Maryburgh (2 miles west), Culbokie (3 miles north-east), Dingwall (3 miles north-west) and Muir of Ord (4 miles south-west). Within a short drive, we also cover Inverness (9 miles south-east), Cradlehall (11 miles south-east), Merkinch (8 miles south-east), Hilton (10 miles south-east), Alness (10 miles north-east) and Invergordon (12 miles north-east). If you’re somewhere remote, a little more planning is needed, so let us know when you get in touch.
Around Easter Kinkell
For rail, the closest station is Conon Bridge station, about 2.1 miles west of the centre. A little further out are Dingwall Castle (2.7 miles north-west) and The Highland Drover Centre (2.3 miles north-west). The countryside around Easter Kinkell includes Tollie Red Kites RSPB Reserve and Loch Ussie.