Highland · Scotland
Bathroom & kitchen resealing in Croy, Highland
Specialist bathroom resealing for Croy: careful preparation, the right product and tidy work. Call for a quick quote.
- Leaking joints on a shower screen
- Lumpy, uneven sealant from a DIY attempt
- New sealant laid over old sealant that is now lifting
Bathroom resealing in Croy
Sealant is the soft line between a bath, shower or worktop and the wall. When it splits, shrinks or turns black, water gets behind it and into the wall or floor. Our team cut the old bead out completely and lay a new one in anti-fungal sanitary silicone. We work on sinks & splashbacks, shower trays & enclosures and kitchen worktops & upstands, and the jobs we see most are damp behind the bath or under the tray and black mould in the silicone that won’t clean off.
In and around a place like Croy, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Where
- Croy (IV2)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
Your questions about bathroom resealing in Croy
Is Croy in your area for bathroom resealing?
Yes. Our work covers the whole of Scotland, and Croy is part of that. You can send an email to info@mrmastic.co.uk and let us know what needs doing.
Do you cover smaller places like Croy?
Yes, we do. Our work covers the whole of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
Is there any odour?
Possibly a little. Any smell clears as the sealant cures, and ventilation helps.
How do I get a quote for bathroom resealing in Croy?
There’s no set price, as it depends on the job: how much there is, what’s there now, how we reach it and what it needs. We agree the price before any work begins.
What do you put in the joint?
Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will tell you what we’re using.
Is the work guaranteed?
Yes. We give a 12-month guarantee on every job, and we are ARBOMaster approved applicators.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Other services in Croy
What bathroom resealing looks like in Croy
Croy is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies.
If you let a flat or house near Inverness Airport station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Croy is about 7 miles south-west of Nairn, in Highland. Homes, rented property, offices and hotels in Croy can book us for bathroom resealing, old or new, large or small. The work is guaranteed for a year. Croy is one of 253 places in Highland where we work for bathroom resealing. Aberdeen is on our list too, around 75 miles away.
Our applicators cover all of IV2 for bathroom resealing and the streets around it. You will find streets such as Fraser Lane, MacKinnon Drive and Miller Road, all of which we cover. We also cover Newlands of Culloden (3 miles south-west), Ardersier (3 miles north), Balloch (4 miles south-west), Viewhill (4 miles south-west) and Cawdor (4 miles east). Larger places within reach include Inverness (9 miles south-west), Nairn (7 miles north-east), Cradlehall (5 miles south-west), Merkinch (9 miles west), Hilton (8 miles south-west) and Alness (15 miles north-west). Remote and island addresses need a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Near you in Croy
The closest station to Croy is Inverness Airport station, roughly 1.8 miles north-west of the centre. Other landmarks nearby include Highland Aviation Museum (2.5 miles north-west) and Kilravock Castle (1.2 miles east). Open spaces near Croy include Loch of the Clans.
When to call us in Croy
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, and a tray that isn’t fully bedded can rock. Over time the joint tears or pulls away from the tile.
The problems people generally mention when they call are:
- Water escaping at the shower enclosure
- Two layers of silicone, both failing
- Gaps between the worktop and the wall
- Smears of silicone across the tiles
For an older house near a landmark such as Croy Parish Church Of Scotland, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Questions to ask before booking
- How long the guarantee is
- What product goes in the joint
- Is the old sealant removed completely?
- What insurance they hold
What we cannot put right
A few problems are outside what sealant work can do:
- Loose or hollow tiles, or failed tanking behind them
- A bath or tray that moves because it is not properly supported
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
What we seal
- Sinks & splashbacks
- Wet rooms
- Shower trays & enclosures
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
What we do, step by step
You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes two to three hours for a typical bath, depending on how much old sealant there is in most cases. Outside jobs in Croy need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- Mould is treated, then the joint is left to dry thoroughly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Getting ready for the visit
- Move anything stored near the joints
- Let us know about stairs, lifts or work at height
- Let us know about parking restrictions
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we’ll explain how we’d tackle it. Whenever you are ready, drop us a line at info@mrmastic.co.uk.
Read more
How we quote for bathroom resealing
We quote each job individually. This is what makes a difference:
- Working hours on commercial sites
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- The number of rooms or windows
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. Your quote takes all of that into account.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
- Any previous sealing or DIY work
- How many joints, rooms or windows are involved
Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
What happens if it’s left?
A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that’s a far bigger job than a reseal. Around Croy, water from a failed joint in an older stone home can soak into timber and plaster, which is a far bigger job than the sealant.
Leaving a failed joint normally makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
Why book with us
- ARBOMaster approved applicator
- 4.9 on Google from 180+ five-star reviews
- Fully insured
- Colour picked to suit the job
See how sealant jobs are priced and our reviews.
How the job changes by surface
Basins & vanity units
The back of a basin gets wet every time someone washes. Old sealant there often goes black at the corners, and we treat it exactly as we would a bath.
Wet rooms
A wet room floor and its walls can move independently, so the corners need a flexible seal, not grout. Where grout in a corner has cracked, we can replace it with sealant.
Can I do it myself?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.