Highland · Scotland
Glazing & conservatory sealant in Croy, Highland
Glazing silicone for conservatories, rooflights, glass panels and shower screens in Croy, with a 12-month guarantee on every job. Ask us for a quote.
- Silicone pulling away from the glass
- A quick top-up bead that didn’t last
- Black or yellowed silicone on glass joints
Glazing silicone in Croy, done properly
Our work covers conservatory joints, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. Each joint is cut out, cleaned and resealed. If you have rooflight joints letting water in and conservatory leaks at frame and glazing joints, we can help, whatever the surface.
Older stone-built homes in Scotland often have sash and case or timber windows set in stone. The sealant has to suit the stone, which rules out acetoxy silicones that can mark or attack it.
The work is guaranteed for twelve months. If something is not right with it in that time, tell us and we will put it right.
- Place
- Croy (IV2)
- Region
- Highland
- Cover
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What happens if it’s left?
Silicone around glazing needs the right product. General-purpose sealant from a DIY shop may not suit glass or the frame, so we use neutral-cure glazing silicone. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. We’ll give you a clear quote for the lot.
Why book with us
- More than 20 years in sealant work
- Sanitary silicone with an anti-fungal additive in wet areas
- Neat joints and a tidy finish
- We agree the colour with you first
Read our cost guide and customer reviews.
Work for landlords, hotels and businesses
If you manage several properties in or around Croy, several properties can go on one quote. Send us the addresses and the work at each, and pictures by email help.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Croy homes and the weather
Croy is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. The west of Scotland is wetter than the east, which means glazing joints and frame seals has to cope with a lot of rain.
Letting a property close to Inverness Airport station? Then leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.
Croy is about 7 miles south-west of Nairn, in Highland. Wherever you are in the IV2 postcode area, we cover glazing silicone for homes and businesses. 253 places in Highland are on our list, from the larger towns to small villages. Our Aberdeen page covers work nearby (75 miles or so).
Our applicators cover all of the IV2 postcode area for glazing silicone and the streets around it. Whether your property is on Fraser Lane, MacKinnon Drive and Miller Road or a nearby road, we can help. If you’re just outside Croy, we cover Newlands of Culloden (3 miles south-west), Ardersier (3 miles north), Balloch (4 miles south-west), Viewhill (4 miles south-west) and Cawdor (4 miles east). We also work in nearby towns such as Inverness (9 miles south-west), Nairn (7 miles north-east), Cradlehall (5 miles south-west), Merkinch (9 miles west), Hilton (8 miles south-west) and Alness (15 miles north-west). If you’re somewhere remote, a little more planning is needed, so mention it when you ask for a quote.
What’s near Croy
Croy’s nearest station is Inverness Airport station, about 1.8 miles north-west. Well-known places in the area include Highland Aviation Museum (2.5 miles north-west) and Kilravock Castle (1.2 miles east). Open spaces near Croy include Loch of the Clans.
Signs you need glazing silicone in Croy
Dirt and grease stop silicone sticking. If the glass and frame weren’t cleaned properly, the bead can peel away early.
People generally contact us after spotting something like this:
- Cracked silicone between glass panels
- A quick top-up bead that didn’t last
- Leaking glazing joints on a rooflight
- Split or lifting silicone on glass
Homes close to Croy Parish Church Of Scotland include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Before you book anyone
- Which sealant they’ll use, and why
- Whether all the old sealant comes out first
- Who turns up on the day
- How long the guarantee is
What sealant work cannot fix
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- A roof that has moved or dropped
- Leaks from the roof covering or flashing (a roofer’s job)
- Condensation trapped between two panes
If you’re not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
What we seal
- Shower screens
- Glass-to-frame joints
- Glass-to-glass joints
- Glass balustrade bases
- Conservatory frames
- Rooflights
Aftercare tips
Looking after new joints is easy:
- Use a gentle glass cleaner and a soft cloth
- Open vents or windows to let moisture out
- Check the gutters above the glazing for debris
- Check the silicone on glass every year or so
Keep the new joints dry for as long as we advise. From then on, a mild glass cleaner is all it needs.
A leaking shower screen may not show at first. Water can soak into the floor or reach the room below long before you see it.
How it works
You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the job takes a few hours for most jobs for a typical job. Somewhere like Croy may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- The joint is cleaned and degreased.
- We lay the new bead and tool it smooth.
- Each joint is checked and, where possible, water-tested.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Tell us if parking is tricky
- Clear the area around the work
Get a quote
We quote each job on its own, so the first step is telling us about yours. Just drop us a line at info@mrmastic.co.uk with the details, and pictures are welcome.
Read more
Quotes for glazing silicone in Croy
You will get a clear quote before we start. It’s based on:
- Mould in or behind the old joints
- Any working-time requirements on site
- The product the joint needs
- Whether old sealant or filler has to be cut out
Instead of a standard rate, we look at what your job involves: the amount of work, the old material and the access. The price is agreed before we begin.
Asking for a quote
When you contact us, these details help:
- What’s wrong with the joints now
- The rough size of the job
- Photos by email, if that is easy
- Any previous sealing or DIY work
For a quote, email us at info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Other services in Croy
Croy questions
Does living near the coast affect glazing silicone in Croy?
Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.
Can you help a landlord with a rental near Inverness Airport station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Will resealing stop my conservatory leaking?
If the water is coming in through failed sealant joints, yes. If it’s a broken panel, failed unit or roof problem, we will tell you.
Do I have to be there?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you don’t need to watch us work.
Which products do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we’ll tell you what we’re using.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
Do you seal glass balustrade bases?
Yes. The old sealant is removed and the joint resealed using a sealant that suits the materials.
What does glazing silicone cost?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before any work starts.