Highland · Scotland
Cromarty Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing for homeowners, landlords and businesses in Cromarty. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Damp behind the bath or under the tray
- Water getting behind the kitchen upstand
- Sealant that has split, shrunk or peeled away
How the visit works
When we arrive, we look over the joints with you first. Surfaces next to the work are protected before any work starts. Most jobs take around two hours for one bath or shower, longer for a whole bathroom. Outdoor work around Cromarty depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Mention any leaks or damp you’ve noticed
- For business premises, tell us about site rules or sign-in
- Move anything stored near the joints
Getting a quote
We do not publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To get started, drop us a line at info@mrmastic.co.uk.
Advice
Bathroom resealing for homes and businesses in Cromarty
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the new joint is not pulled apart the first time it’s used. Quick jobs often leave it out, and it makes a real difference. We are often asked to deal with failed sealant on the screen profile and a joint torn by a bath that flexes, across basins & vanity units, shower trays & enclosures and sinks & splashbacks.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are normally the first signs.
Your job is guaranteed for a year, as with all our work.
- Where
- Cromarty (IV11)
- Wider area
- Highland
- Cover
- A year, on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Questions from Cromarty
What guarantee comes with bathroom resealing in Cromarty?
Every job comes with our one-year guarantee, wherever it is. We are also fully insured and ARBOMaster approved.
Is Cromarty within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Can you reseal around my kitchen sink and worktop?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then we reseal in a colour to suit.
Which products do you use?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Is there any odour?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. After that, you can carry on with your day.
What information do you need?
A short description and the location. We’ll ask anything else we need to know.
Are you ARBOMaster approved?
Yes. We’re an ARBOMaster approved applicator, the approved applicator scheme for Arbo sealants.
Surface by surface
Wet rooms
A wet room floor and its walls can move independently, so the internal corners need silicone rather than grout. Where grout in a corner has cracked, we can replace it with sealant.
Kitchen worktops & upstands
Water behind a laminate worktop can make the edge swell. A sound joint along the back edge stops that, as long as the worktop itself is firmly fixed.
DIY versus a professional finish
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Cromarty homes and their sealant
Cromarty is close to the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
For jobs in and around Cromarty, choosing the right material for each joint is as important as a tidy finish.
Cromarty is about 9 miles north-west of Nairn, in Highland. We carry out bathroom resealing for homes and businesses in Cromarty and nearby. We cover 253 towns and villages across Highland, large and small. Aberdeen is on our list too, around 80 miles away.
Here we cover the IV11 postcode area for bathroom resealing. If you need bathroom resealing at a property on High Street, Allan Square and Denoon Place or a nearby road, we can help. Cromarty sits on or near the A832 and B9163, so getting to you is simple. If you are just outside Cromarty, we cover Nigg (3 miles north), Davidston (3 miles south-west), Pitcalnie (3 miles north), Barbaraville (4 miles north-west) and Kilmuir (4 miles north-west). Further out, we also cover Nairn (9 miles south-east), Cradlehall (14 miles south), Tain (9 miles north), Alness (8 miles west), Dornoch (14 miles north) and Invergordon (5 miles west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Around Cromarty
Other landmarks nearby include Cromarty Courthouse Museum (within half a mile east) and County Community Hospital (4.4 miles west). Open spaces near Cromarty include Udale Bay RSPB reserve.
What else we do in Cromarty
What we’re called out for in Cromarty
With age, silicone loses its stretch. Along worktops it tends to pull back from the wall, opening a hairline gap that lets water and crumbs in. Hot pans and harsh cleaners don’t help.
The most common problems we see are:
- Black mould in the silicone that will not clean off
- Gaps where the bath or tray has moved
- Smears of silicone across the tiles
- Shrunken sealant along the back of a worktop
Around Cromarty, as everywhere, bathroom resealing is only as good as the preparation behind it.
Comparing quotes
- What product goes in the joint
- Who turns up on the day
- What insurance they hold
- Which colour the sealant will be
What affects the cost of bathroom resealing
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- Working hours on commercial sites
- The number of rooms or windows
- Whether there’s mould to deal with
- The product the joint needs
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all play a part.
Helping us quote
Photos by email are helpful but not essential. Please mention:
- What’s wrong with the joints now
- The address or postcode of the job
- Roughly how big the job is
- If someone has resealed it before
Want a quote for bathroom resealing? Please drop us a line at info@mrmastic.co.uk with a few details. We will explain what we’d do and send you a clear quote before any work starts.
What we cannot put right
In fairness, some problems need a different trade:
- Cracked or missing grout between tiles (that’s regrouting)
- Water coming from the plumbing rather than the joint
- Loose or hollow tiles, or failed tanking behind them
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
- Sinks & splashbacks
- Kitchen worktops & upstands
- Baths
Why it’s worth doing now in Cromarty
The difference in a professional reseal is mostly what you do not see: removing all the old sealant, degreasing the joint, treating mould and drying it properly. Skip those steps and even the best silicone fails early. Around Cromarty, water from a failed joint in an older stone home can soak into timber and plaster.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Why Cromarty clients choose us
- Sanitary silicone with an anti-fungal additive in wet areas
- An ARBOMaster approved applicator
- Experience in homes, commercial sites and hotels
- White, clear, grey or another colour, product permitting