Argyll and Bute · Scotland
Bathroom & kitchen resealing in Craignure, Argyll and Bute
Our applicators work in Craignure on bath, shower, basin, wet room, worktop and sink resealing. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.
- Black spots spreading through the bead
- Sealant that has split, shrunk or peeled away
- Failed sealant on the screen profile
Questions from Craignure
Is bathroom resealing in Craignure guaranteed?
All our work, in Craignure and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Will you come out to Craignure?
Yes. Craignure is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
How do I get a quote for bathroom resealing in Craignure?
It depends on the job, so we quote each one individually. For a quick quote, email us at info@mrmastic.co.uk and let us know what needs doing and where.
What do you put in the joint?
The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do you work for hotels and businesses?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. Working times can be discussed when we quote.
How we handle bathroom resealing in Craignure
Mr Mastic has more than 20 years’ experience of sealant work, and our applicators reseal bathrooms and kitchens across Craignure. We’re ARBOMaster approved and fully insured, and the work comes with a 12-month guarantee. If you have black spots spreading through the bead and damp behind the bath or under the tray, we can help, on baths, kitchen worktops & upstands and basins & vanity units alike.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
All of our work is guaranteed for twelve months, in Craignure and everywhere else we cover.
- Where
- Craignure (PA65)
- Region
- Argyll and Bute
- Cover
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What affects the quote in Craignure
For a quick quote, just ask. The main things that affect it are:
- Which sealant suits the joint
- The old material and how stubborn it is
- The size of the job
- Any mould that needs treating
We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please drop us a line at info@mrmastic.co.uk.
Asking for a quote
When you call or email, it’s useful to know:
- Any previous sealing or DIY work
- What the problem is, such as mould, gaps, leaks or cracking
- How many joints, rooms or windows are involved
- If it’s domestic, commercial or a hotel
There’s no standard price list. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.
Craignure homes and their sealant
Craignure is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
In and around Craignure, as anywhere, good bathroom resealing starts with a clean, dry, properly prepared joint.
Craignure is in Argyll and Bute. We provide bathroom resealing to homes and businesses in Craignure and the surrounding area. Our area takes in 118 places across Argyll and Bute, large and small. There’s also a page for Glasgow, roughly 70 miles from Craignure.
Postcode districts we cover here for bathroom resealing: PA65. We also cover the places around Craignure: Lochdon (3 miles south), Lochaline (5 miles north-west), Achnacroish (9 miles east), Balliveolan (9 miles east) and Salen (9 miles west). Further out, we also cover Oban (10 miles south-east), Dunollie (10 miles south-east) and Dunbeg (10 miles east). Remote and island addresses need a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.
Local landmarks in Craignure
Around Craignure, our work takes us to homes and buildings near Craignure Inn, among other places. Well-known places in the area include Duart Castle (2.8 miles south-east) and Mull and Iona Community Hospital (within half a mile north-west).
Landlords, agents and businesses in Craignure
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll quote.
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
What sealant work cannot fix
We won’t take on work that will not last, so here’s what sealant cannot put right:
- Failed grout lines across the wall
- Cracks in the tray itself rather than the joint
- Movement from a bath with loose feet or no proper support
Not sure which it is? You can email us at info@mrmastic.co.uk and we’ll tell you honestly.
What we seal
- Sinks & splashbacks
- Wet rooms
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Shower trays & enclosures
Also near Craignure
What else we do in Craignure
What we do, step by step
Once we are on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take two to three hours for a typical bath, depending on how much old sealant there is. Around Craignure, distance and access matter more than parking. Let us know how to find you and how to reach the joints.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Preparing for the visit
- Mention any sign-in or site rules at work premises
- Tell us if parking is tricky
- Clear the area around the work
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Related advice
Do you need bathroom resealing in Craignure?
Plenty of failed sealant has been laid over the top of older sealant. Fresh silicone can’t grip the old bead underneath, so it peels, leaks and hides mould behind it.
These are the problems we are asked about most:
- Black mould in the silicone that will not clean off
- Two layers of silicone, both failing
- Leaks into the floor or ceiling below
- A joint torn by a bath that flexes
In the older streets around Torosay Church, older homes can move a little, which is hard on rigid grout and tired sealant.
What your quote should include
- Which sealant they’ll use, and why
- How long to leave it before use
- Whether they seal over old material or remove it
- How hidden problems are handled
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Don’t let bottles sit on the bead
- Avoid abrasive pads on the sealant
- Wipe up water along the back of the worktop
- Keep an eye on the corners, where splits start
Keep bottles and razors off the sealant line, because they trap water against the silicone. A quick squeegee after showering helps the joint dry.
Watch for the early signs: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. If you spot one, it’s time to reseal.