Edinburgh · Scotland
Chesser Bathroom Resealing
Bath, shower, basin, wet room, worktop and sink resealing in Chesser, with a 12-month guarantee on every job. Call for a quick quote.
- Water getting behind the kitchen upstand
- A messy, uneven bead from a previous reseal
- Two layers of silicone, both failing
About our bathroom resealing in Chesser
Resealing is a small job that makes a big difference. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. If you are dealing with gaps where the bath or tray has moved and a reseal done over the top of the old bead, we can help.
Chesser is in one of Scotland’s four big cities, where many tenement bathrooms were fitted into rooms that weren’t built for them. Rooms like that are often small and slow to dry out, which is hard on sealant and grout.
All our work is covered by our one-year guarantee.
- Where
- Chesser (EH14, EH11, EH12)
- Region
- Edinburgh
- Cover
- One year on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Signs you need bathroom resealing in Chesser
Silicone needs a clean, dry surface without any grease to stick to. Soap residue, oils and leftover silicone film all get in the way, and a joint that looked fine soon begins to come away.
Look out for any of the following:
- Leaks into the floor or ceiling below
- A bead that has pulled away from the tiles
- Gaps where the bath or tray has moved
- Black spots spreading through the bead
If you let a flat or house near Slateford station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
What your quote should include
- What happens if the job turns out different
- Is the old sealant removed completely?
- How the surfaces are prepared before sealing
- How long to leave it before use
How the visit works
You do not need to clear the whole room or building, just the space around the work. Everything nearby is protected, and the work takes a morning or an afternoon for most single baths and showers for a typical job. In a city area like Chesser, parking may be by permit or pay-and-display, so tell us what’s nearby. If you’re in a flat, let us know how we get in at the street door.
- First, each joint is checked for movement and signs of water.
- Every trace of the old bead is removed, including the thin smear on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- We tool the bead to a neat finish and give you the cure time, usually around 24 hours.
How to prepare
- Tell us about any previous sealing or DIY attempts
- Let us know about stairs, lifts or work at height
- Let us know if you’ve seen damp or leaks
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. Whenever you’re ready, drop us a line at info@mrmastic.co.uk.
Read more
Other services in Chesser
Landlords, agents and businesses in Chesser
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance that we can handle for you.
Different surfaces, different methods
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. We seal them in a colour that suits the worktop, so the line doesn’t stand out.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. If water gets in, the cabinet underneath can swell, so the joint is sealed in one unbroken line.
What sealant work can’t fix
We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:
- Failed grout lines across the wall
- A leaking waste, trap or valve
- Movement from a bath with loose feet or no proper support
If you’re not sure, just drop us a line at info@mrmastic.co.uk and we will give you a straight answer before booking.
Joints and surfaces we work on
- Sinks & splashbacks
- Basins & vanity units
- Wet rooms
- Kitchen worktops & upstands
- Baths
- Shower trays & enclosures
Common questions in Chesser
Do you work for hotels and guest houses in Chesser?
Yes. Hotel and guest-house work is part of what we do. Jobs can be programmed room by room, with out-of-hours working possible to arrange.
Can a failed shower seal in a tenement flat in Chesser leak into the flat below?
Yes. With flats above and below, a leak from a failed seal rarely stays in one flat. Cutting out the old sealant and laying a fresh bead puts a stop to it.
Can I do it myself?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
What do you need from me for a quote?
Just the basics: the address or postcode, what’s wrong and any access issues. Then email us at info@mrmastic.co.uk.
Will there be a smell?
It depends on the product. Some smell for a while, some hardly at all.
When can I use the bath or shower again?
Normally after around 24 hours. We will tell you the cure time for the product we used.
Does someone need to be in?
For indoor joints, yes, someone needs to let us in. Once we’ve agreed the job, you do not need to watch us work.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme.
Looking after it afterwards
Simple care keeps the joints in good condition. Our advice:
- Give the silicone its full cure time
- Wipe the sealant dry after showering
- Use gentle cleaners on the silicone
- Move toiletries away from the joint
In a kitchen, don’t let water sit along the back of the worktop and keep hot pans off the bead. The drier the joint stays, the longer it lasts.
Mould that starts as a few spots spreads through the bead. When it has grown right through, it rarely cleans out, and nearby grout often goes the same way. Replacing the sealant early keeps the job small.
Bathroom resealing in Chesser: local notes
In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Managing a site like Balgreen Primary School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s. In the older streets around Stenhouse Saughton Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Chesser is about 2 miles south-west of Edinburgh, in Edinburgh. Jobs in Chesser get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Across Edinburgh, we cover 175 places, Chesser among them.
Here we cover the EH14, EH11 and EH12 postcode area for bathroom resealing. We cover properties on Appin Lane, Ford's Road and Gorgie Road. Close by, we work in Slateford (1 mile east), Parkhead (1 mile south-west), Redhall (1 mile south-west), Stenhouse (1 mile north-west) and Longstone (1 mile south-west). Within a short drive, we also cover Leith (5 miles north-east), Bonnington (4 miles north-east), Greenside (3 miles north-east), Broughton (3 miles north-east), Bellevue (3 miles north-east) and Silvermills (3 miles north-east).
Around Chesser
Locally, jobs take us to homes and businesses close to Cross Keys Tavern, Gabrielle Keiller Library and Merchiston Castle School. Also close by are Saughton Park (under half a mile north) and Firrhill High School (1.1 miles south-east). Chesser has its own railway station: Slateford station. A little further out are Merchiston Tower (1.4 miles east) and Murrayfield Experience (0.9 miles north). Open spaces near Chesser include Dunsapie Loch and Craiglockhart Hill.
Can I do it myself?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.