Hampshire · England
Bursledon Bathroom Resealing
Professional bathroom resealing in and around Bursledon, with old sealant always removed completely and a 12-month guarantee.
- Water getting behind the bath panel
- Shrunken sealant along the back of a worktop
- A reseal done over the top of the old bead
Work for landlords, hotels and businesses
Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
How we handle bathroom resealing in Bursledon
Before a bath is sealed, it’s filled with water. The weight settles the bath to its lowest point, so the bead isn’t stretched the first time someone gets in. It’s a small step that rushed reseals tend to skip. If you have a joint torn by a bath that flexes and leaks into the floor or ceiling below, we can put it right.
Smaller places like Bursledon still have plenty of bathrooms that work hard every day. Older or newer, every room gets the same approach: old sealant or grout cut out, joints cleaned and dried, and a fresh finish laid.
You are covered for a year from the day we finish. If anything isn’t right with it, ring 0345 464 0079 or send us an email.
- Where
- Bursledon (SO31)
- Region
- Hampshire
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Towns and villages near Bursledon
More services for Bursledon
What affects the quote in Bursledon
The quote reflects the job in front of us. We take into account:
- The old material and how stubborn it is
- How easy the joints are to reach
- The number of rooms or windows
- The type of sealant required
Combining jobs into one visit is usually more efficient than separate visits. We will give you a clear quote for the lot.
Helping us quote
To help us quote quickly, let us know:
- Any previous sealing or DIY work
- Photos by email, if that is easy
- The rough size of the job
- What the problem is, such as mould, gaps, leaks or cracking
We don’t publish a price list, because every job is different. Instead, we give you a clear quote for your job. To get started, call 0345 464 0079 or email us.
Bathroom resealing in Bursledon: local notes
Bursledon is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings.
Schools such as Bursledon Church of England Infant School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Homes close to St Paul’s Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant. Rented homes near Bursledon station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Bursledon is about 2 miles south of Hedge End, in Hampshire. Every kind of property in Bursledon is covered for bathroom resealing. Every job comes with our 12-month guarantee. Our area takes in 683 places across Hampshire.
Here we cover the SO31 postcode area for bathroom resealing. Whether your property is on High Street, Station Road and School Road or anywhere close by, our applicators can take on the job. If you’re just outside Bursledon, we cover Lowford (1 mile north-west), Old Netley (1 mile west), Butlocks Heath (1 mile south-west), Hound (1 mile south-west) and Netley (2 miles south-west). Within a short drive, we also cover Winchester (12 miles north), Gosport (9 miles south-east), Havant (14 miles east), Eastleigh (6 miles north), Fareham (6 miles south-east) and Horndean (13 miles east).
Local landmarks in Bursledon
We work in homes and buildings around The Hamble School, Grove Park Business and Enterprise College and Westwood Woodland Park and the streets around them. For rail, the closest station is Bursledon station, roughly 0.5 miles south-east. Well-known places in the area include Bursledon Brickworks Industrial Museum (1.1 miles east) and Coldeast (1.8 miles south-east). For a walk, there’s Netley Common.
What we cannot put right
To be straight with you, some problems need a different trade:
- Failed grout lines across the wall
- Tiles that have come away from the wall
- A tray or bath that’s cracked through
If in doubt, ring 0345 464 0079 or send us an email and we’ll say what we think before you book.
Joints and surfaces we work on
- Basins & vanity units
- Baths
- Kitchen worktops & upstands
- Sinks & splashbacks
- Shower trays & enclosures
- Wet rooms
Why deal with it now?
Tired sealant isn’t a reason to replace a bath or shower. A new bead often brings the whole room back. If we find a deeper problem, you will hear it from us. Around Bursledon, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why us?
- We never seal over old sealant
- Full insurance on every job
- Quality sealants from Arbo and Everbuild
- Experience in homes, commercial sites and hotels
See what affects the cost or our reviews.
What the job involves on each surface
Wet rooms
Not every wet room leak is a sealant problem. We reseal the joints and will tell you if the water seems to be coming from somewhere else.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so a neat, continuous bead matters.
Aftercare tips
So the new joints stay in good condition:
- Keep the fan on for a while after bathing
- Do not let bottles sit on the bead
- Wait for the cure time we give you
- Clean with a mild bathroom cleaner and a soft cloth
Keep water off the new bead until it has cured, which is normally around 24 hours. After that, a quick wipe after showering helps keep it clean.
A failed kitchen joint is easy to miss. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. Resealing before that happens protects the worktop.
Questions from Bursledon
Do you cover smaller places like Bursledon?
Yes, Bursledon is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you cover Bursledon for bathroom resealing?
Yes. Our work covers London and the South East, and Bursledon is part of that. Just call 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear price.
Do the sealants smell?
Possibly a little. It fades as the sealant cures.
Can I choose the colour of the sealant?
You are not limited to white: white, clear and colours to suit tiles and worktops. We’ll talk it through when we quote.
Is it messy?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do you take out the old sealant first?
Yes. We cut out all the old sealant and clean the joint before resealing.
Can you quote for more than one area?
Yes. Tell us about everything you’d like done and you’ll get one quote.
What we do, step by step
We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes around two hours for one bath or shower, longer for a whole bathroom, and the area is left clean. In a smaller place like Bursledon, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We cover the area around the joints we are working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- The joint is finished neatly and we explain when it can get wet.
Getting ready for the visit
- On commercial sites, let us know about site rules
- Tell us about any previous sealing or DIY attempts
- Mention any leaks or damp you’ve noticed
Getting a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work before giving you a price.