Hampshire · England
Bathroom Resealing in Lowford
We cover Lowford for bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Lumpy, uneven sealant from a DIY attempt
- Mouldy sealant that has gone black
- Damp behind the bath or under the tray
How we handle bathroom resealing in Lowford
A fresh bead of silicone changes how a bathroom looks more than most people expect. Mouldy silicone makes even a new bathroom look neglected, and a neat new joint puts that right in a short visit. Just as important, it closes the gaps water would otherwise get through. Common call-outs are for gaps where the bath or tray has moved and water getting behind the bath panel, across basins & vanity units, wet rooms and shower trays & enclosures.
In a smaller place like Lowford, homes are mostly houses and bungalows rather than flats, some older and some much newer. Bathrooms and kitchens here get the same daily wear as anywhere, and the sealant and grout show it first.
Big or small, you get the same one-year guarantee.
- Location
- Lowford (SO31)
- Region
- Hampshire
- Cover
- One year on every job
- Quote
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
How it works
We keep the work tidy and contained to the joints we are treating, so you can carry on as normal. The job generally takes half a day or less for one room, longer when the kitchen is included, and we tell you how long to leave it before we go. For a job in Lowford, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- Protection goes down around the bath, shower or worktop.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- The joint is finished neatly and we explain when it can get wet.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Tell us about any water getting in
- Keep children and pets away from the work area
Getting a quote
Getting a quote is simple: let us know what needs doing and where, and roughly how big it is. A few pictures by email make the job easier to understand, and we’ll come back to you with a quote.
Read more
What we’re called out for in Lowford
With age, silicone loses its stretch. Along worktops it tends to pull back from the wall, opening a hairline gap that lets water and crumbs in. Heat from the hob and strong sprays speed it along.
These are the problems we are asked about most:
- Black spots spreading through the bead
- Lumpy, uneven sealant from a DIY attempt
- Water escaping at the shower enclosure
- A reseal done over the top of the old bead
For an older house near a landmark such as St Paul’s Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Questions to ask before you book
- Whether the sealant suits the joint
- Are they insured?
- What happens if the job turns out different
- When the joint can take water or movement
What bathroom resealing looks like in Lowford
Lowford is within about 2 miles of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
Managing a site like Bursledon Church of England Infant School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. For landlords with property near Bursledon station, mouldy sealant is one of the first things a new tenant notices, so it’s worth renewing between lets.
Lowford is about 2 miles south-west of Hedge End, in Hampshire. Lowford gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Across Hampshire, we cover 683 places, Lowford among them.
Here we cover the SO31 postcode area for bathroom resealing. If you need bathroom resealing at a property on Hamble Lane, St George Close and Woolwich Close or a nearby road, we can help. If you’re just outside Lowford, we cover Old Netley (1 mile south-west), Bursledon (1 mile south-east), Butlocks Heath (1 mile south-west), Hound (1 mile south-west) and Netley (1 mile south-west). Further out, we also cover Winchester (12 miles north), Gosport (10 miles south-east), Havant (15 miles east), Eastleigh (5 miles north), Fareham (6 miles south-east) and Horndean (14 miles east).
Around Lowford
We work in homes and buildings around Oasis Academy Mayfield, Westwood Woodland Park and The Linden Tree pub, among other places. The nearest railway station is Bursledon station, roughly 0.9 miles south-east of the centre. Other landmarks nearby include Coldeast (2.3 miles south-east) and Netley Castle (1.9 miles south-west). The countryside around Lowford includes Netley Common.
What sealant work cannot fix
A few problems are outside what sealant work can do:
- Water getting in through the grout rather than the sealant
- A tray or bath that is cracked through
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly before booking.
What we seal
- Wet rooms
- Baths
- Basins & vanity units
- Kitchen worktops & upstands
- Sinks & splashbacks
- Shower trays & enclosures
Why deal with it now?
Running new silicone over the old joint can look tidy for a few weeks, but it can’t stick to what’s underneath. It lifts, traps water and grows mould behind it, and the next reseal means two layers to cut out. In an older home around Lowford, damp from a failed joint can get into timber and plaster, which is far harder to put right than the sealant itself.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will explain what it covers.
Why Lowford clients choose us
- Fully insured
- Neat joints and a tidy finish
- ARBOMaster approved applicator
- White, clear, grey or another colour, product permitting
See our cost guide and customer reviews.
Your questions about bathroom resealing in Lowford
Will you come out to Lowford?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you cover Lowford for bathroom resealing?
Yes. We work across London and the South East, and Lowford is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.
What should I tell you?
Only a few details: the address or postcode, what’s wrong and any access issues. Then ring 0345 464 0079 or send us an email.
Can I add another job to the visit?
Yes, and it often makes sense. Combining jobs makes good use of the visit, so mention them when you ask for a quote.
Do you do kitchens as well as bathrooms?
Yes. Where it’s needed by the sink, we use a food-safe sealant.
Can you get rid of the black mould in my sealant?
Yes, we replace the mouldy bead. Cleaning products may lighten it, but the lasting fix is new anti-fungal silicone on a clean, treated joint. Airing the room well helps stop it returning.
Do you guarantee your resealing?
Yes, a 12-month guarantee. Looking after the joint as we suggest helps it last.
Do you take out the old sealant first?
Yes, always, and completely. New sealant won’t bond properly to old, so any old material comes out before anything new goes in.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Avoid abrasive pads on the sealant
- Run the extractor fan during and after every shower
- Stick to a soft cloth and a mild cleaner
- Keep bottles off the sealant line
Check the sealant now and then. Small splits and lifting ends are easy to catch early, so if something doesn’t look right, just ring 0345 464 0079 or email us.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. Resealing before that happens protects the worktop.
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Different surfaces, different methods
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. Water that gets behind can damage the unit, so the joint is sealed in one unbroken line.