Hampshire · England
Bathroom & kitchen resealing in Butlocks Heath, Hampshire
Bathroom resealing for Butlocks Heath and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Water getting behind the bath panel
- Splits where the tray meets the wall
- Black mould in the silicone that will not clean off
For landlords and businesses
Letting agents often deal with us directly. Send the address, what’s needed and the access arrangements and we’ll give you a quote.
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Bathroom resealing for homes and businesses in Butlocks Heath
Across Butlocks Heath, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Each one is stripped, cleaned and dried before new silicone goes in. We work on basins & vanity units, kitchen worktops & upstands and shower trays & enclosures, and the jobs we see most are black spots spreading through the bead and new sealant laid over old sealant that is now lifting.
For a small place like Butlocks Heath, bathroom resealing is planned like any other job: the journey and access are simply agreed in advance. In the bathroom or kitchen, the work is the same as in any town.
Each job carries a 12-month guarantee.
- Place
- Butlocks Heath (SO31)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Price
- A clear price before any work starts
- Phone
- 0345 464 0079
- Updated
- 26 October 2026
Surface by surface
Baths
Most bath leaks begin along the long edge, particularly where there’s a shower over the bath. We finish it with a single, even bead of anti-fungal silicone, tooled so water cannot sit on it.
Wet rooms
Not every wet room leak is a sealant problem. We reseal the joints and will tell you if the water seems to be coming from somewhere else.
Butlocks Heath homes and their sealant
Butlocks Heath is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
If you let a flat or house near Netley station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for. Managing a site like Netley Abbey Infant School? Then washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Butlocks Heath is about 3 miles north-east of Hythe, in Hampshire. Wherever you are in the SO31 postcode area, we can carry out bathroom resealing at your property. 683 places in Hampshire are on our list, large and small.
Jobs for bathroom resealing in SO31 works the same way as everywhere else we cover. That includes homes and businesses on Woolston Road, Old School Close and The Grove. We also cover the places around Butlocks Heath: Netley (1 mile south-west), Hound (1 mile south), Old Netley (1 mile north-east), Lowford (1 mile north-east) and Bursledon (1 mile north-east). We also work in nearby towns such as Winchester (12 miles north), Gosport (10 miles south-east), Havant (15 miles east), Eastleigh (6 miles north), Fareham (6 miles east) and Horndean (14 miles east).
Near you in Butlocks Heath
We work in homes and buildings around The Hamble School, Grove Park Business and Enterprise College and Westwood Woodland Park and the streets around them. There’s a railway station in Butlocks Heath itself: Netley station. Other landmarks nearby include Westquay (3.4 miles north-west) and Bursledon Brickworks Industrial Museum (2.2 miles east). The countryside around Butlocks Heath includes Mercury Marshes.
How we quote for bathroom resealing
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Which sealant suits the joint
- Whether old sealant or filler has to be cut out
- Any mould that needs treating
- How many areas need sealing
Every job is a little different, so each one gets its own quote. Size, access and the product the joint needs all play a part, and we’ll explain the quote if you ask.
What we need to know
When you contact us, these details help:
- Roughly how big the job is
- Photos by email, if that’s easy
- The address or postcode of the job
- The problem you’ve noticed
Call for a quick quote, or email us if that’s easier. Describe what needs sealing and we’ll talk you through the work.
When something else is needed
A few problems are outside what sealant work can do:
- Cracked or missing grout between tiles (that is regrouting)
- A cracked shower tray or bath (that needs repair or replacement)
- Leaks from a shower valve, waste or pipework (a plumber’s job)
If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer.
Joints and surfaces we work on
- Kitchen worktops & upstands
- Shower trays & enclosures
- Baths
- Basins & vanity units
- Sinks & splashbacks
- Wet rooms
When to call us in Butlocks Heath
Black mould is behind a lot of resealing. Steamy rooms that do not dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
These are the problems we’re asked about most:
- A bead that has pulled away from the tiles
- Smears of silicone across the tiles
- Damp behind the bath or under the tray
- Splits where the tray meets the wall
For an older house near a landmark such as Church of St Mary, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
What to look for in a quote
- Who turns up on the day
- Whether the sealant suits the joint
- What insurance they hold
- How long the guarantee is
The process
On the day, we look over the joints with you first, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. Most jobs take a couple of hours for one bath or shower, or most of a day for a full bathroom and kitchen. Somewhere as small as Butlocks Heath, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- Mould is treated, then the joint is left to dry thoroughly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Let us know if you’ve seen damp or leaks
- Clear the area around the work
- Mention any sign-in or site rules at work premises
Ask for a quote
For a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. We’ll give you a clear price before any work starts.
Read more
What else we do in Butlocks Heath
Your questions about bathroom resealing in Butlocks Heath
Will you come out to Butlocks Heath?
Yes. Butlocks Heath is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do bathroom resealing in Butlocks Heath?
Yes, Butlocks Heath is within the area we cover. Our work covers London and the South East. You can ring 0345 464 0079 or email us and tell us what needs doing, and we’ll give you a clear price.
Do you have insurance?
Yes. We are fully insured for every job we do.
How long before the new sealant can get wet?
Around 24 hours is typical, and we confirm the time for the product used. Using it sooner can damage the bead.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Is it worth trying it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional, while a short indoor joint may be within reach.
Will the old sealant be removed?
Yes, every time. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Is the work guaranteed?
Yes. We give a 12-month guarantee on every job, and we’re fully insured.
Can I do it myself?
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.