Windsor and Maidenhead · England
Bathroom Resealing in Brookside
Bathroom resealing across Brookside and nearby, with every bit of old sealant taken out first.
- Black spots spreading through the bead
- A joint torn by a bath that flexes
- A bead that has pulled away from the tiles
Brookside homes and their sealant
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
In the older streets around Chapel of St Mary and St John, walls and floors in older homes can move, and sealant and grout show it first. Schools such as Papplewick School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
Brookside is about 3 miles east of Wick Hill, in Windsor and Maidenhead. Homes, rented property, offices and hotels in Brookside is covered for bathroom resealing. The work is guaranteed for a year. Our Windsor and Maidenhead coverage runs to 57 places, Brookside among them. You can also see our page for Reading, about 13 miles away.
Every address in SL5 and SL4 is covered for bathroom resealing, from the main roads to the quietest streets. We cover properties on New Road, The Avenue and Coach Road. Neighbouring places we cover for bathroom resealing include North Ascot (1 mile south-west), Plaistow Green (1 mile north), Woodside (1 mile north-east), Ascot (1 mile south-east) and Winkfield (1 mile north-west). Within a short drive, we also cover Maidenhead (7 miles north), Windsor (4 miles north-east), Boyn Hill (6 miles north-west), Cookham (9 miles north), Furze Platt (8 miles north) and Dedworth (4 miles north).
Around Brookside
In Brookside, that means homes and buildings near Ascot Heath Church of England Junior School and Royal Hunt pub and the streets around them. Brookside’s nearest station is Ascot station, roughly 1.3 miles south of the centre. Other landmarks nearby include Heatherwood Hospital (1 mile south) and The Lexicon (3 miles west). Green spaces nearby include Virginia Water Lake.
Bathroom resealing in Brookside
Sealant that’s mouldy, cracked or peeling shouldn’t be left until there’s a leak. Just phone 0345 464 0079 or email us with a photo of the joints, and you will get a clear quote for bathroom resealing in Brookside. We’re often asked to deal with failed sealant on the screen profile and sealant that has split, shrunk or peeled away, across kitchen worktops & upstands, sinks & splashbacks and baths.
In a village or hamlet like Brookside, homes are often older cottages and farmhouses alongside a few newer houses. Older walls and timber floors can move a little, and cracked grout and split sealant are often the first signs.
Every job comes with a 12-month guarantee.
- Where
- Brookside (SL5, SL4)
- Region
- Windsor and Maidenhead
- Guarantee
- One year on every job
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Brookside questions
Is Brookside within the area you cover?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Ascot station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can call 0345 464 0079 or email us with the details for a clear quote.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
Do you take out the old sealant first?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Is the work guaranteed?
Yes. Every job carries our one-year guarantee.
Is it messy?
Tidy work is part of the job. We protect what’s around the joints, and we clear up when we are done.
Where is Mr Mastic based?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Looking after it afterwards
Once the sealant has cured, a few habits help it last:
- Squeegee the walls and tray after use
- Do not leave water standing on kitchen joints
- Use gentle cleaners on the silicone
- Never pick at the silicone with a blade
Check the sealant now and then. A small split or a corner lifting is easy to spot, and if anything looks wrong, just ring 0345 464 0079 or email us.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
Nearby places to Brookside
What else we do in Brookside
Should I try it myself first?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
The process
A visit follows a simple pattern: we look at the joints together, protect the area around them, carry out the job and tidy away. Most jobs take a morning or an afternoon for most single baths and showers. For a village or hamlet like Brookside, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- The joint is cleaned, degreased and treated for mould.
- We let it dry fully and fill the bath with water before sealing.
- We apply anti-fungal sanitary silicone in one even bead and tool it neatly.
- Finally we tidy up and explain the cure time before we leave.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Mention any sign-in or site rules at work premises
- Tell us about any water getting in
How to get a quote
To get a quote, call 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before work begins.
Read more
When to call us in Brookside
No sealant lasts indefinitely. Every shower, every splash and every wipe with a cleaner slowly wear it down, so its life depends on how the room is used, cleaned and aired.
It’s worth asking for a quote if you see:
- Leaking joints on a shower screen
- New sealant laid over old sealant that is now lifting
- Lumpy, uneven sealant from a DIY attempt
- Mouldy sealant that has gone black
Rented homes near Ascot station change hands often, and a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Comparing quotes
- Which sealant they’ll use, and why
- How much experience the applicator has
- Is the old sealant removed completely?
- How the colour is chosen
What affects the cost of bathroom resealing
Your quote is based on your job. We look at:
- The type of sealant required
- How much old sealant there is and how hard it is to remove
- The number of rooms or windows
- The size of the job
We do not show prices on the website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or drop us an email.
Helping us quote
There’s no need for technical detail. Just tell us:
- The problem you’ve noticed
- If it’s domestic, commercial or a hotel
- A few pictures by email, if you can
- Any previous sealing or DIY work
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we’ll explain what’s involved and give you a clear quote.
Why it’s worth doing now in Brookside
Running new silicone over the old joint can look tidy for a few weeks, but it will not bond. Water creeps under it and mould follows, and the next reseal means two layers to cut out. Where a wall is exposed, as many are in small places like Brookside, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
What you get with us
- We’re fully insured
- Any old sealant cut out fully, not covered over
- Quality sealants from Arbo and Everbuild
- A sealant colour to suit the surroundings
What we can’t put right
Some problems need a builder, plumber or other trade rather than us:
- A bath or tray that moves because it isn’t properly supported
- Loose or hollow tiles, or failed tanking behind them
- Leaks from a shower valve, waste or pipework (a plumber’s job)
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we will tell you honestly.
Surfaces we seal
- Kitchen worktops & upstands
- Sinks & splashbacks
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures