Windsor and Maidenhead · England
Bathroom Resealing in Cheapside
Bathroom resealing across Cheapside and nearby, with old sealant always removed completely and a one-year guarantee.
- Black spots spreading through the bead
- Smears of silicone across the tiles
- Splits where the tray meets the wall
Bathroom resealing in Cheapside
The secret of a lasting bead is the preparation. Every bit of old silicone comes out, down to the thin film left on the tiles, then the joint is cleaned, degreased and treated for mould. New silicone goes on only when the joint is fully dry. We work on shower trays & enclosures, basins & vanity units and sinks & splashbacks, and the jobs we see most are sealant that has split, shrunk or peeled away and a messy, uneven bead from a previous reseal.
Homes around Cheapside are mostly houses and cottages rather than flats. The work is the same as anywhere: old material cut out, joints cleaned and a fresh finish laid.
We stand behind the work with a 12-month guarantee, so you are not left on your own once the job is done.
- Place
- Cheapside (SL5)
- Wider area
- Windsor and Maidenhead
- Cover
- One year on every job
- Price
- A clear price before work begins
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
We’ll always be straight with you, so here’s what sealant can’t fix:
- A leaking waste, trap or valve
- A tray that rocks until it’s re-bedded
- Loose or hollow tiles, or failed tanking behind them
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Surfaces we seal
- Shower trays & enclosures
- Sinks & splashbacks
- Wet rooms
- Baths
- Basins & vanity units
- Kitchen worktops & upstands
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Why deal with it now?
Running new silicone over the old joint can look tidy for a few weeks, but it will not bond. It lifts, traps water and grows mould behind it, and the next reseal means two layers to cut out. In a small place like Cheapside, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Doing several joints on one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. We will send you a clear quote for the lot.
Why us?
- More than 20 years in sealant work
- Sealant colour chosen to suit
- 180+ five-star Google reviews
- Tidy, careful work
See what affects the cost and what customers say.
Work for landlords, hotels and businesses
For anyone letting property in or around Cheapside, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
Places near Cheapside
Other services in Cheapside
What we are called out for in Cheapside
Sealing over old silicone is one of the commonest mistakes we find. New silicone will not bond to old silicone, so it lifts, lets water in and traps mould underneath.
The problems people normally mention when they call include:
- Shrunken sealant along the back of a worktop
- A bead that has pulled away from the tiles
- A messy, uneven bead from a previous reseal
- Mouldy sealant that has gone black
In the older streets around Church of St Michael and All Angels, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Comparing quotes
- How the joint is cleaned and prepared
- The length of the guarantee
- What happens if the job turns out different
- Whether the sealant suits the joint
How the job changes by surface
Kitchen worktops & upstands
The joint between worktop and wall takes splashes, crumbs and cleaning sprays. The new bead is colour-matched where it shows.
Wet rooms
A wet room floor and its walls can move independently, so the internal corners need silicone rather than grout. Cracked grout in a corner can be cut out and replaced with silicone.
Cheapside: your questions answered
Can you do bathroom resealing in Cheapside?
Yes, Cheapside is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or send us an email with a few details of the job, and we’ll send you a clear quote.
Can you help a landlord with a rental near Ascot station?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Can you get rid of the black mould in my sealant?
Yes. The old sealant comes out, the mould is treated, and we reseal with anti-fungal sanitary silicone.
Is it OK to put new sealant on top of the old bead?
No, never. A bead laid over old silicone soon starts to come away, because silicone does not bond to silicone. We remove the old bead completely before resealing.
Do you work for hotels and businesses?
Yes, regularly. We can plan bigger jobs in stages.
What information do you need?
The location, the problem and the rough size of the job. Photos by email help too.
How much does bathroom resealing cost in Cheapside?
There’s no set price, as it depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
Do you guarantee your resealing?
Yes. All our work comes with a 12-month guarantee.
Bathroom resealing in Cheapside: local notes
Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
For landlords with property near Ascot station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay. For site and facilities teams at buildings such as Cheapside CofE Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Cheapside is about 4 miles south of Windsor, in Windsor and Maidenhead. Our applicators cover bathroom resealing for householders, landlords and businesses in Cheapside and the surrounding area, as part of our work across Windsor and Maidenhead. We cover 57 towns and villages across Windsor and Maidenhead, from the larger towns to small villages. There’s also a page for Reading, roughly 14 miles from Cheapside.
All of SL5 is covered for bathroom resealing. Bathroom resealing is available to properties on Water Splash Lane, Dorian Drive and Cheapside Road. Other places close to Cheapside include Beggar's Bush (1 mile south-east), Ascot (1 mile south-west), Blacknest (1 mile south-east), Woodside (1 mile north-west) and Sunninghill (1 mile south). Within a short drive, we also cover Maidenhead (8 miles north-west), Windsor (4 miles north), Boyn Hill (7 miles north-west), Cookham (10 miles north), Furze Platt (9 miles north-west) and Dedworth (4 miles north).
Around Cheapside
Around Cheapside, our work takes us to homes and buildings near Papplewick School, Charters School and Thatched Tavern Public House and the streets around them. The nearest railway station is Ascot station, roughly 1.6 miles south-west of the centre. Well-known places in the area include Heatherwood Hospital (1.8 miles west) and Berkshire Yeomanry Museum (3.9 miles north-east). The countryside around Cheapside includes Virginia Water Lake and Gracious Pond.
What we do, step by step
We bring everything the job needs with us, so you don’t need to buy or prepare anything. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes around two hours for one bath or shower, longer for a whole bathroom. Somewhere like Cheapside needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- First, each joint is checked for movement and signs of water.
- The old silicone is cut out completely, along with the film it leaves on the tiles.
- Joints are degreased and any mould is treated.
- When the joint is dry, and a bath has been filled with water, the new silicone goes on.
- The bead is tooled smooth and you are told the cure time, normally around 24 hours.
Before we arrive
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
- Try not to wet indoor joints just before the visit
Getting a quote
To get a quote, phone 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before work begins.