Windsor and Maidenhead · England
Bathroom Resealing in Furze Platt
Baths, showers and worktops in Furze Platt need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Damp behind the bath or under the tray
- New sealant laid over old sealant that is now lifting
- Black mould in the silicone that won’t clean off
FAQs for Furze Platt
Will you come out to Furze Platt?
Yes, Furze Platt is covered. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work for landlords with property near Furze Platt station?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or drop us an email and tell us about the property, and we’ll give you a clear quote.
What colours of sealant can you use?
We can use white, clear or a colour to suit. Where the joint is on show, we match it to the surface.
Do you remove the old sealant?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
Can you quote for more than one area?
Yes. More than one area can be quoted together.
Do you do kitchens as well as bathrooms?
Yes. The old sealant is cut out and the joint degreased, because cooking grease stops silicone sticking, then a colour-matched bead is laid.
When can I use the bath or shower again?
The surface skins over fairly quickly, but the bead needs longer to cure right through. Leave it around 24 hours before it gets wet, or follow the cure time we give you.
Is it messy?
Not at all. The area is protected while we work and cleaned up afterwards.
Bathroom resealing in Furze Platt
It is not only bathrooms. The joint between worktop and wall, the edge of the sink and the bottom of the splashback all take splashes every day, and water that gets into the back edge of a worktop can swell the board. Kitchen joints get a sealant suited to kitchens, colour-matched where it shows. Common call-outs are for lumpy, uneven sealant from a DIY attempt and shrunken sealant along the back of a worktop, on wet rooms, sinks & splashbacks and baths.
In and around Furze Platt, older properties sit alongside newer ones. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
We stand behind the work with a one-year guarantee, so you’re not left on your own once the job is done.
- Location
- Furze Platt (SL6)
- Wider area
- Windsor and Maidenhead
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Common problems we fix in Furze Platt
Silicone needs a clean, dry surface without any grease to stick to. Soap residue, oils and leftover silicone film all get in the way, so a rushed job can start to lift early.
It’s worth asking for a quote if you see:
- A joint torn by a bath that flexes
- Leaking joints on a shower screen
- Sealant that has split, shrunk or peeled away
- Smears of silicone across the tiles
For an older house near a landmark such as Church of St Peter, walls and floors in older homes can move, and sealant and grout show it first.
Questions to ask before booking
- Who turns up on the day
- Are they insured?
- How hidden problems are handled
- Which colour the sealant will be
Bathroom resealing in Furze Platt: local notes
Most of the South East has hard water, which leaves limescale on sealant, grout and fittings.
If you look after a building such as Furze Platt Senior School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you let a flat or house near Furze Platt station, a reseal between tenants is a quick way to make the bathroom and kitchen look cared for.
Furze Platt is about 1 mile north of Maidenhead, in Windsor and Maidenhead. For bathroom resealing in and around Furze Platt, it’s easy to get a quote: please call 0345 464 0079 or email us. We cover Windsor and Maidenhead from our Crawley base. Furze Platt is one of 57 places in Windsor and Maidenhead where we work. You can also see our page for Reading, about 12 miles away.
Jobs for bathroom resealing in SL6 is quoted and booked the same way as anywhere else. Whether your property is on Camden Road, Harrow Lane and Bridle Road or anywhere close by, we can help. Nearby, we also carry out bathroom resealing in Maidenhead (1 mile south), Pinkneys Green (1 mile west), Cookham Dean (2 miles north), Cookham (2 miles north) and Boyn Hill (2 miles south). We also work in nearby towns such as Windsor (6 miles south-east), North Ascot (8 miles south), Dedworth (6 miles south-east), Broomhall (11 miles south-east), South Ascot (10 miles south) and Old Windsor (9 miles south-east). Furze Platt is one of the larger places we cover in Windsor and Maidenhead.
Near you in Furze Platt
Locally, jobs take us to homes and businesses close to Braywick Park, St Piran's School and Furze Platt Junior School and the streets around them. There’s a railway station in Furze Platt itself: Furze Platt station. Well-known places in the area include The Reitlinger Bequest Museum (1.7 miles south-east) and St Mark's Hospital (0.8 miles south-west). The countryside around Furze Platt includes Weycock Hill and Taplow Lake.
What affects the quote in Furze Platt
We do not publish a price list, because no two jobs are the same. What we look at:
- Working hours on commercial sites
- Whether the work is at height
- How many areas need sealing
- The size of the job
Rather than a set price list, we look at what your job involves: the amount of work, the old material and the access. You will know the price before we begin.
Helping us quote
Photos by email are helpful but not essential. Try to tell us:
- What’s wrong with the joints now
- If someone has resealed it before
- If it’s domestic, commercial or a hotel
- Photos by email, if that is easy
For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before work begins.
Towns and villages near Furze Platt
What else we do in Furze Platt
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Keep the fan on for a while after bathing
- Keep bottles off the sealant line
- Avoid abrasive pads on the sealant
- Do not leave water standing on kitchen joints
Check the sealant now and then. A small split or a corner lifting is easy to spot, and if anything looks wrong, just ring 0345 464 0079 or send us an email.
A split bead lets water through every time the bath or shower is used. Over time that water reaches floors, walls and ceilings. Resealing early stops it.
How the job changes by surface
Basins & vanity units
Vanity units have long, worktop-style joints against the wall. If water gets in, the cabinet underneath can swell, so a neat, continuous bead matters.
Baths
The long joint down the side of a bath is where most leaks start, especially under a shower. It gets one smooth bead of anti-fungal silicone.
The process
When we arrive, we look over the joints with you first, so there are no surprises. We protect the surfaces around the joints before any work begins. Most jobs take half a day or less for one room, longer when the kitchen is included. A visit to Furze Platt is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- We cover the area around the joints we’re working on.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Preparing for the visit
- Clear the area around the work
- Try not to wet indoor joints just before the visit
- On commercial sites, let us know about site rules
Get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll talk you through what we’d do. When it suits you, call 0345 464 0079 or drop us an email.
Advice
For landlords and businesses
For anyone letting property in or around Furze Platt, several properties can be quoted together. Send us the addresses and the work at each, and photos by email help.
Hotels need rooms back in use, so we plan the work room by room. We have worked in hotels as well as homes and businesses.
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.