Windsor and Maidenhead · England
Glazing Silicone in Brookside
Professional glazing silicone in and around Brookside, with every bit of old sealant taken out first.
- Stained, discoloured glazing silicone
- Leaks from the base of a shower screen
- Drips on the inside of a conservatory window
Windows and doors in Brookside
Compared with the north and west, the South East gets less rain, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as St Leonard's Hill (about 3.2 miles north-east) nearby, there’s older building stock in the area around Brookside as well as newer homes. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.
Homes close to Chapel of St Mary and St John include some older properties, and frames set in older brick or stone need a sealant that suits the wall as well as the frame. If you look after a building such as Papplewick School, the mastic around its windows and doors needs looking after like any other building’s.
Brookside is about 3 miles east of Wick Hill, in Windsor and Maidenhead. Every kind of property in Brookside can book us for glazing silicone. Every job comes with our one-year guarantee. Our area takes in 57 places across Windsor and Maidenhead, large and small. Our Reading page covers work nearby.
Every address in SL5 and SL4 is within our area for glazing silicone. If you need glazing silicone at a property on New Road, The Avenue and Coach Road or anywhere close by, we can help. Other places close to Brookside include North Ascot (1 mile south-west), Plaistow Green (1 mile north), Woodside (1 mile north-east), Ascot (1 mile south-east) and Winkfield (1 mile north-west). Further out, we also cover Maidenhead (7 miles north), Windsor (4 miles north-east), Boyn Hill (6 miles north-west), Cookham (9 miles north), Furze Platt (8 miles north) and Dedworth (4 miles north).
Near you in Brookside
Typical jobs here are in homes near Ascot Heath Church of England Junior School and Royal Hunt pub and the streets around them. The closest station to Brookside is Ascot station, about 1.3 miles south. Nearby you will also find Heatherwood Hospital (1 mile south) and The Lexicon (3 miles west). Green spaces nearby include Virginia Water Lake.
Glazing silicone in Brookside
Glazing silicone is a maintenance item. Sun, rain and movement wear it down, and once it cracks, water follows. Resealing puts that right. Typical jobs include silicone pulling away from the glass and rooflight joints letting water in, on conservatory frames, glass-to-frame joints and glass-to-glass joints.
In a village or hamlet like Brookside, older cottages and farmhouses often have timber windows set in stone or brick. Not every older frame suits a modern silicone bead, and sometimes a traditional sand mastic is the better choice.
Big or small, it’s backed by our one-year guarantee in Brookside and across Windsor and Maidenhead.
- Place
- Brookside (SL5, SL4)
- Region
- Windsor and Maidenhead
- Cover
- 12 months on all our work
- Price
- A clear price before we start
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What affects the cost of glazing silicone
Jobs vary more than people expect. What affects the quote:
- The size of the job
- Which sealant suits the joint
- Whether there’s mould to deal with
- When we can work, for business premises
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Call for a quick quote and we will explain what it covers.
What to tell us for a quote
What to tell us when you ask for a quote:
- Whether it’s a home or a business
- What’s wrong with the joints now
- Where the property is
- Any access issues, like height or stairs
Getting a quote is simple: let us know what needs doing and where and its rough size. A few pictures by email make the job easier to understand.
Signs you need glazing silicone in Brookside
Sunlight breaks sealant down, especially on conservatory roofs. Old silicone hardens, cracks and loses its grip to the glass and frame.
It’s worth asking for a quote if you see:
- Shower screens leaking along the wall or tray
- Water getting into a conservatory at the joints
- New silicone smeared over old sealant
- Leaking glazing joints on a rooflight
If you let a flat or house near Ascot station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.
What to look for in a quote
- Whether the sealant suits the joint
- Whether they seal over old material or remove it
- What happens if they find a problem under the old sealant
- What the cure time is
Looking after it afterwards
So the new joints stay in good condition:
- Keep scrapers and blades away from the silicone
- Clean glass with a mild cleaner and a soft cloth
- Don’t leave a drip for the next storm
- Ventilate the conservatory to cut condensation
Keep conservatory gutters clear so water doesn’t back up against the seals. Blocked gutters can push water where it shouldn’t go.
Damp patches, drips and condensation along a joint are worth checking. It may be sealant, or something else and we will find out which.
Also near Brookside
More services for Brookside
When it isn’t the sealant
A few problems are outside what sealant work can do:
- Cracked or broken glass
- Leaks from the roof covering or flashing (a roofer’s job)
- A roof that has moved or dropped
Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
What we seal
- Glass balustrade bases
- Glass-to-glass joints
- Conservatory frames
- Glass-to-frame joints
- Shower screens
- Rooflights
Leave it or put it right?
Glazing joints need a sealant made for the job. General-purpose sealant from a DIY shop may not suit glass or the frame so we choose a glazing silicone instead. Around Brookside, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Why Brookside clients choose us
- Quality sealants from Arbo and Everbuild
- Old sealant always removed completely
- Domestic, commercial and hotel work
- White, clear, grey or coloured to suit, where the product allows
See our cost guide or our reviews.
DIY versus a professional finish
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
What we do, step by step
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and clear up. It generally takes anything from an hour or two to most of a day, depending on the size of the job. Somewhere like Brookside needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We trace the leak and confirm it’s a sealant joint.
- The failed silicone is cut out without marking the glass or frame.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- We check the finished joints and test with water where it’s safe.
Getting ready for the visit
- Mention if the joints have been sealed before
- Mention any leaks or damp you’ve noticed
- Mention any tricky access
How to get a quote
Every job is quoted individually. Simply phone 0345 464 0079 or send us an email and describe the job and send photos if you have them.
Advice
Brookside questions
Do you work for landlords with property near Ascot station?
Yes. We work for landlords and agents as well as homeowners. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Is Brookside within the area you cover?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. Longer journeys are simply planned in advance.
Will it make a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Can you match the sealant colour?
We’ll suggest a colour to suit the surroundings, from white and clear to greys and other shades. The choice depends on the product the joint needs.
Where is Mr Mastic based?
We work from Crawley. We cover Brookside and the rest of Windsor and Maidenhead.
Do you take out the old sealant first?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
How long before the joint can be used?
Most sealants are touch-dry well before they’re fully cured. We’ll give you the cure time for the product we used.