Shetland Islands · Scotland
Baltasound Bathroom Resealing
Our applicators work in Baltasound on bath, shower, basin, wet room, worktop and sink resealing. Old sealant removed completely, joints prepared properly.
- Black spots spreading through the bead
- A bead that has pulled away from the tiles
- Gaps where the bath or tray has moved
Why deal with it now?
Leaving a split or mouldy bead only stores up trouble. Once water is behind the bath, it can reach floorboards, panels and the ceiling underneath, turning a small job into a building repair. In a place like Baltasound, small leaks are easy to put off, but water through a failed joint keeps working away until it’s fixed.
The cost reflects the work involved, not a rough estimate. That’s why we ask about the job first and give you a clear quote before work begins.
What you get with us
- 180+ five-star Google reviews
- Sanitary silicone with an anti-fungal additive in wet areas
- An ARBOMaster approved applicator
- Experience in homes, commercial sites and hotels
Read what affects the cost and customer reviews.
Bathroom resealing for homes and businesses in Baltasound
Showers work their sealant harder than baths. Tray edges, screen profiles and wet room joints all rely on silicone to stay watertight. Each gets a bead of anti-fungal sanitary silicone, tooled smooth so water runs off instead of sitting in a ridge. If you are dealing with sealant that has split, shrunk or peeled away and new sealant laid over old sealant that is now lifting, we can help.
Being further from a city does not change the work: old material out, joints cleaned and dried, and a fresh, even finish. We just plan the journey and access beforehand.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Location
- Baltasound (ZE2)
- Region
- Shetland Islands
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What we’re called out for in Baltasound
A bath shifts a little every time it’s filled and emptied. An acrylic bath flexes under load, while a poorly supported tray can shift underfoot. Over time the joint tears or pulls away from the tile.
The most common problems we see are:
- Leaks into the floor or ceiling below
- A reseal done over the top of the old bead
- Gaps between the worktop and the wall
- Black mould in the silicone that will not clean off
Schools such as Baltasound Junior High School are buildings too, and its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What to look for in a quote
- Whether VAT is included
- Whether they’re fully insured
- How the colour is chosen
- Whether all the old sealant comes out first
Looking after it afterwards
Good habits help new joints last longer. A few tips:
- Squeegee the walls and tray after use
- Check the joints every few months for splits or lifting
- Use gentle cleaners on the silicone
- Avoid abrasive pads on the sealant
Good ventilation does more than any cleaner. Run the extractor fan during and after a shower, so the bead dries out between uses.
Small signs come before a leak: a corner lifting, a gap behind the bead, a dark line under the silicone or a damp patch on the ceiling below. Any of these means the joint needs attention.
Your questions about bathroom resealing in Baltasound
Do you cover Baltasound for bathroom resealing?
Yes, Baltasound is within the area we cover. We work across all of Scotland. You can email us at info@mrmastic.co.uk and let us know what needs doing, and we’ll give you a clear quote.
Do you cover smaller places like Baltasound?
Yes. Baltasound is within the area we cover, which takes in towns, villages and rural addresses. We work across all of Scotland, including the islands, where work is planned around ferry crossings. Let us know about access, parking and anything unusual about getting there when you book.
Do you remove the old sealant?
Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.
How do I get a quote for bathroom resealing in Baltasound?
Size, access and the old material all affect the cost. Ask us for a quote.
Can you just seal over the old silicone?
No. A bead laid over old silicone soon starts to come away. We remove the old bead completely before resealing.
How long before the new sealant can get wet?
After around 24 hours in most cases. You’ll get the exact cure time before we leave.
Do you guarantee your resealing?
Yes, a 12-month guarantee. Good ventilation and gentle cleaning help it last.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can I do it myself?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.
Also in Baltasound
Bathroom resealing around Baltasound
Baltasound is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. But mould still grows into sealant and grout in a room that doesn’t dry out.
If you live in an older home near Kirkhoull, older homes can move a little, which is hard on rigid grout and tired sealant.
Baltasound is in the Shetland Islands. Our applicators cover bathroom resealing for homes and businesses in Baltasound and the surrounding area. Baltasound is one of 63 places in the Shetland Islands we cover for bathroom resealing.
We cover every part of the ZE2 postcode area for bathroom resealing and the streets around it. Streets in the area include Setters Hill Estate, Curlew Avenue and Cormorant Way. Close by, we work in Haroldswick (3 miles north-east), Clivocast (6 miles south), Cullivoe (6 miles south-west), Houbie (11 miles south) and Camb (12 miles south-west). Baltasound is one of the larger places we cover in the Shetland Islands. For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
Near you in Baltasound
Nearby you’ll also find Unst Boat Haven (2.1 miles north-east). Green spaces nearby include Loch of Beiton and Muckle Heog.
How it works
On the day, we look over the joints with you first, so you know exactly what we are doing. We protect the surfaces around the joints before work begins. Most jobs take a morning or an afternoon for most single baths and showers. For a place like Baltasound, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Protection goes down around the bath, shower or worktop.
- Old sealant is sliced away and the residue removed.
- We treat any mould and let the joint dry properly.
- Any bath is filled with water, then we lay a bead of anti-fungal silicone in white, clear or a matching colour.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
Before we arrive
- Tell us about any water getting in
- Try not to wet indoor joints just before the visit
- Tell us about access, such as stairs, a lift or high-level joints
Getting a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, send an email to info@mrmastic.co.uk.
Advice
Honest limits
Sealant is not the answer to every problem, and we’ll tell you before work begins. Sealant will not put right:
- A tray or bath that is cracked through
- Cracked or missing grout between tiles (that is regrouting)
- Loose or hollow tiles, or failed tanking behind them
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before booking.
Surfaces we seal
- Kitchen worktops & upstands
- Baths
- Basins & vanity units
- Shower trays & enclosures
- Sinks & splashbacks
- Wet rooms
What affects the cost of bathroom resealing
Jobs vary more than people expect. The main factors:
- Access and height
- Any mould that needs treating
- How many areas need sealing
- The size of the job
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- A few photos by email, if you can
- If it’s domestic, commercial or a hotel
- Whether it has been sealed before
- The rough size of the job
If you’re in Baltasound and need bathroom resealing, email us at info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.