Dundee · Scotland
Window Mastic in Burnside of Duntrune
Window mastic for Burnside of Duntrune and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Draughts coming in around windows and doors
- Sealant in the wrong colour for the frame
- Rain getting in at the frame or under the sill
Common problems we fix in Burnside of Duntrune
Some failures date back to when the windows were fitted. Sealant run over dust, wet brick or loose mortar never bonded as it should, so it comes away long before its time.
The problems people normally mention when they call are:
- Gaps between the frame and the inside reveal
- Mastic that is falling out in pieces
- Hard, cracked sealant around windows
- White mastic on grey or black frames
If you let a flat or house near Broughty Ferry station, renewing tired window mastic between tenants heads off draught and damp complaints.
What your quote should include
- What preparation is included
- What product goes in the joint
- How much experience the applicator has
- What happens if the job turns out different
How we handle window mastic in Burnside of Duntrune
Mr Mastic’s applicators have more than 20 years’ experience with window and door sealants. We are fully insured ARBOMaster approved applicators, and every job is covered by a 12-month guarantee. If you have cracked sealant at the sill ends and cold air getting in at the frame edge, we can help, on uPVC windows, timber windows & doors and aluminium frames alike.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Exposed frames and sills take the full force of wind-driven rain.
You’re covered for a year from the day we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Place
- Burnside of Duntrune (DD4, DD5)
- Region
- Dundee
- Cover
- A year, on every job
- Price
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
What happens if it’s left?
Working on frames from a ladder with a sealant gun is not easy, especially on upper floors. We cut out properly, back deep gaps and tool every joint neatly, in a sealant suited to the wall. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
No two jobs are quite the same, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference.
Why choose Mr Mastic in Burnside of Duntrune
- 20+ years of sealant experience
- Sanitary silicone with an anti-fungal additive in wet areas
- Trusted Arbo and Everbuild sealants
- Homes, businesses and hotels
Aftercare tips
Aftercare is simple:
- Wash the frames with mild soapy water
- Make sure the drainage slots are not blocked
- Check the mastic once a year
- Wipe condensation off the frames
Keep the new mastic undisturbed while it cures, for as long as we advise. Keep jet washers away from the frames.
A failed joint lets water into the wall a little at a time. Often the first sign is a damp patch inside or flaking paint on the reveal. Early resealing stops it reaching that point.
What we do, step by step
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes most of a day for a typical house, less for a few frames. Somewhere like Burnside of Duntrune may be a longer drive, and the journey is planned ahead. Mention tracks, gates, ferries or anything else about the route.
- First, we go round the frames with you and agree the list.
- The old mastic is cut out and scraped back to clean surfaces.
- Deep gaps get closed-cell backing rod to set the depth.
- The new sealant goes on in white, brown, anthracite grey, black or clear to suit.
- We tool each bead neatly and check every joint is closed.
Preparing for the visit
- Mention any tricky access
- Tell us about any water getting in
- Where the joints are inside, avoid wetting them before we arrive
Get a quote
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is. When it suits you, email us at info@mrmastic.co.uk.
Read more
Questions from Burnside of Duntrune
Is window mastic in a coastal place like Burnside of Duntrune any different?
Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are generally the first to need attention.
Is Burnside of Duntrune within the area you cover?
Yes, Burnside of Duntrune is covered. Our work covers the whole of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
How do I get a quote for window mastic in Burnside of Duntrune?
We do not publish prices, because the cost depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.
Where do you work from?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
What do you need from me for a quote?
Just the basics: where it is, what you’ve noticed and how we reach it. Then send an email to info@mrmastic.co.uk.
Will it make a mess?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
When is the sealant fully cured?
Many sealants skin over quickly but take longer to cure fully. We’ll give you the cure time for the product we used.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.
Nearby places to Burnside of Duntrune
What else we do in Burnside of Duntrune
What affects the quote in Burnside of Duntrune
Every job gets its own quote. These are the things that affect it:
- How much old sealant there is and how hard it is to remove
- The number of rooms or windows
- Working hours on commercial sites
- Any mould that needs treating
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins.
What we need to know
Before you ask for a quote, have a think about:
- Where the property is
- The problem you’ve noticed
- Roughly how big the job is
- Any access issues, like height or stairs
Every job is quoted individually. Simply send an email to info@mrmastic.co.uk and describe the job, and photos are welcome.
What window mastic looks like in Burnside of Duntrune
Burnside of Duntrune is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on the mastic around window and door frames, which can dry out and crack sooner where a building faces the weather. Dundee sits on the north bank of the Tay, and much of its older housing is sandstone tenements.
If you look after a building such as Braeview Academy, the mastic around its windows and doors needs looking after like any other building’s.
Burnside of Duntrune is about 3 miles north-west of Broughty Ferry, in Dundee. Anywhere in DD4, our applicators can take on window mastic. Across Dundee, we cover 50 places, and Burnside of Duntrune is one of them.
Postcode districts we cover here for window mastic: DD4 and DD5. Other places close to Burnside of Duntrune include Ballumbie (1 mile south), Whitfield (1 mile south-west), Pitkerro (2 miles south-west), Bucklerheads (2 miles north-east) and Douglas (2 miles south). Further out, we also cover Dundee (3 miles south-west), Broughty Ferry (3 miles south-east), Stobswell (3 miles south-west), Monifieth (3 miles east), Blackness (4 miles south-west) and Barnhill (3 miles south-east).
Landmarks near Burnside of Duntrune
The closest station to Burnside of Duntrune is Broughty Ferry station, roughly 2.8 miles south-east. A little further out are Maryfield Hospital (2.6 miles south-west) and Ballumbie Castle (0.5 miles east). Not far away are Balgay Hill and Trottick Mill Ponds.
What the job involves on each surface
Composite doors
A composite door generally sits in a plastic outer frame, and the joint around it is sealed like a window. The bead is colour-matched to the frame.
Timber windows & doors
Wood swells when it’s wet and shrinks when it dries, so a flexible sealant is essential. We seal onto sound, dry paintwork or timber.