Dundee · Scotland
Burnside of Duntrune Bathroom Resealing
Problem with your baths, showers and worktops in Burnside of Duntrune? We remove the old material, prepare the joints and seal them properly.
- A reseal done over the top of the old bead
- Gaps between the worktop and the wall
- Water getting behind the bath panel
Burnside of Duntrune: your questions answered
Can you do bathroom resealing in Burnside of Duntrune?
Yes, Burnside of Duntrune is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Will you come out to Burnside of Duntrune?
Yes, we do. We work across all of Scotland, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. If you can, email a few photos.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Can I add another job to the visit?
Yes. More than one area can be quoted together.
Do you remove the old sealant?
Yes, always, and completely. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Do you work for letting agents?
Yes, we do. Domestic, commercial and hotel work are all part of what we do, and we’re fully insured.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Bathroom resealing for homes and businesses in Burnside of Duntrune
A reseal only lasts if the joint is properly prepared. The old sealant is removed to the last smear, after which the joint is degreased and any mould treated. Only once it’s dry does the new bead go on. We work on basins & vanity units, kitchen worktops & upstands and baths, and the jobs we see most are smears of silicone across the tiles and a joint torn by a bath that flexes.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses. Where a building moves, cracked grout and split sealant are generally the first signs.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Burnside of Duntrune (DD4, DD5)
- Wider area
- Dundee
- Cover
- A year, on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What we’re called out for in Burnside of Duntrune
Black mould is behind a lot of resealing. Steamy rooms that do not dry out give mould all the damp it needs, and once it has grown into the bead, cleaning rarely gets it out.
If you can see any of these, it’s time to have the joints looked at:
- A messy, uneven bead from a previous reseal
- Water getting behind the kitchen upstand
- Leaking joints on a shower screen
- Gaps where the bath or tray has moved
For site and facilities teams at buildings such as Braeview Academy, its toilets, changing areas and kitchens need their sealant renewed like any other building’s.
What your quote should include
- What happens if they find a problem under the old sealant
- Which sealant they’ll use, and why
- How the joint is cleaned and prepared
- How the colour is chosen
Leave it or put it right?
A failed joint gets more costly to put right the longer it’s left. Water that gets behind a bath soaks into the floor, the panel and sometimes the ceiling below, and that is a far bigger job than a reseal. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
What you pay reflects the work, not guesswork. That is why we ask about the job first and send you a clear quote before work begins.
Why Burnside of Duntrune customers choose us
- A 12-month guarantee on all work
- Over 20 years’ experience
- Experience in homes, commercial sites and hotels
- ARBOMaster approved applicator
Read what affects the cost or customer reviews.
Burnside of Duntrune homes and their sealant
Burnside of Duntrune is within about 3 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. In Scotland, private landlords have to meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Failed sealant around a bath or shower is worth sorting between tenancies.
If you let a flat or house near Broughty Ferry station, fresh sealant around the bath, shower and sink between tenancies helps a property present well and keeps leaks at bay.
Burnside of Duntrune is about 3 miles north-west of Broughty Ferry, in Dundee. Whether you’re in the middle of Burnside of Duntrune or further out, we cover bathroom resealing for every kind of property, from flats and houses to offices and hotels. Burnside of Duntrune is one of 50 places in Dundee we cover.
Here we cover the DD4 and DD5 postcode area for bathroom resealing. Nearby, we also carry out bathroom resealing in Ballumbie (1 mile south), Whitfield (1 mile south-west), Pitkerro (2 miles south-west), Bucklerheads (2 miles north-east) and Douglas (2 miles south). We also work in nearby towns such as Dundee (3 miles south-west), Broughty Ferry (3 miles south-east), Stobswell (3 miles south-west), Monifieth (3 miles east), Blackness (4 miles south-west) and Barnhill (3 miles south-east).
What’s near Burnside of Duntrune
For rail, the closest station is Broughty Ferry station, about 2.8 miles south-east. A little further out are Maryfield Hospital (2.6 miles south-west) and Ballumbie Castle (0.5 miles east). The countryside around Burnside of Duntrune includes Balgay Hill and Trottick Mill Ponds.
How we quote for bathroom resealing
There’s no set price list, because no two jobs are the same. The quote depends on:
- Mould in or behind the old joints
- When we can work, for business premises
- Which sealant suits the joint
- How many rooms, windows or areas are involved
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- Any access issues, like height or stairs
- The type of property
- Photos by email, if that’s easy
- The rough size of the job
Getting a quote is simple: let us know the job and the location, and roughly how big it is. Photos by email help us understand the job, and we’ll come back to you with a quote.
Towns and villages near Burnside of Duntrune
Other services in Burnside of Duntrune
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Landlord and commercial work in Burnside of Duntrune
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.
When something else is needed
New sealant cannot fix everything, and we’ll tell you before any work starts. Sealant won’t put right:
- A bath or tray that moves because it is not properly supported
- Failed grout lines across the wall
- Loose or hollow tiles, or failed tanking behind them
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.
Surfaces we seal
- Kitchen worktops & upstands
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Sinks & splashbacks
- Baths
How it works
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes half a day or less for one room, longer when the kitchen is included. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We cover the area around the joints we are working on.
- We cut away the old sealant and clean off what’s left.
- We treat any mould and let the joint dry properly.
- Baths are filled first, then anti-fungal sanitary silicone is applied in a colour to suit.
- We finish the joint, clear up and tell you how long to leave it before it gets wet.
How to prepare
- Try not to wet indoor joints just before the visit
- Mention any parking rules near the property
- Let us know about earlier repairs to the joints
How to get a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, send an email to info@mrmastic.co.uk.