Shetland Islands · Scotland

Bremirehoull Window Mastic

We cover Bremirehoull for mastic around window and door frames, sills and patio doors. Old material cut out, joints cleaned and sealed neatly and a one-year guarantee.

  • Water coming in at the bottom corners of a door
  • Cracked or shrunken mastic around the frame
  • A bead that doesn’t match the frame

Window mastic near Bremirehoull

How to look after the new joints

So the new joints stay in good condition:

  • Avoid blasting the frames with a pressure washer
  • Air rooms to keep condensation down around windows
  • Clear any debris from frame drain holes
  • Keep paint off silicone joints

On timber frames, keep the paintwork in good order, since wood that gets wet swells and shrinks more. Paint up to the joint, not over the silicone.

Look out for the warning signs: cracks in the mastic, gaps you can see light through, damp on the reveal or mould around the inside of the frame. If you notice one, it’s time to get the joint looked at.

Window mastic in Bremirehoull, done properly

Homes in Bremirehoull have every kind of window: from uPVC casements to timber and aluminium, along with patio doors, French doors and sills. The sealant is chosen to suit the frame material and the wall. If you are dealing with whistling draughts around closed windows and water coming in at the bottom corners of a door, we can help, whatever the surface.

In and around a place like Bremirehoull, homes range from older stone-built cottages to newer houses. Wind-driven rain finds any gap around a frame or sill, so the mastic there works hard.

There’s a 12-month guarantee on every job, large or small.

Place
Bremirehoull (ZE2)
Region
Shetland Islands
Cover
A year, on every job
Quotes
Quoted before any work starts
Email
info@mrmastic.co.uk
Page updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

What happens on the day

At the end, we look at the finished work together and tell you how long to leave it. The work normally takes a few hours for a handful of frames, longer for a whole house, depending on the amount of work. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints.

  1. We check how each frame can be reached safely.
  2. Old, cracked mastic is removed completely, along with any loose debris.
  3. The surfaces are cleaned and left dry.
  4. Backing rod fills deep voids and the sealant goes in on top.
  5. The joint is shaped to shed water and the area tidied.

Preparing for the visit

  • Mention if the joints have been sealed before
  • Mention any tricky access
  • Let us know if you’ve seen damp or leaks

Ask for a quote

Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we’ll talk you through what we’d do. When it suits you, drop us a line at info@mrmastic.co.uk.

Get a price

Related advice

Landlords, agents and businesses in Bremirehoull

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

Housing providers, facilities teams and property managers book us too. Several sites can be quoted together, and we are fully insured for the work.

Your questions about window mastic in Bremirehoull

Does the coastal weather in Bremirehoull affect outside sealant?

Coastal homes put outside sealant through more weather than inland ones, so the choice of sealant and the preparation matter even more. It’s worth checking the walls that face the sea first.

Will you come out to Bremirehoull?

Yes, Bremirehoull is covered. We work across all of Scotland, islands included, from towns to the smallest places. Longer journeys are simply planned in advance.

Do you guarantee window mastic?

Yes. Our one-year guarantee covers every job, inside or out.

Do you take out the old sealant first?

Yes. All of the old material is cut out and the joint cleaned before resealing.

Does someone need to be in?

Access is agreed with you when the job is booked. Indoors, that usually means someone at home.

Is there any odour?

That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.

Can I do it myself?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Can you do upstairs windows?

Yes, as long as they can be reached safely. Tell us about access when you get in touch and we’ll plan for it.

What window mastic looks like in Bremirehoull

Bremirehoull is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on the mastic around window and door frames, especially on the side facing the sea. Island jobs need planning around ferries and the weather, so the more notice, the better.

For jobs in and around Bremirehoull, choosing the right material for each joint is as important as a tidy finish. In and around Bremirehoull, as anywhere, good window mastic starts with a clean, dry, properly prepared joint.

Bremirehoull is about 8 miles south of Lerwick, in the Shetland Islands. Across the ZE2 area, we cover window mastic for homes and businesses. Bremirehoull is one of 63 places in the Shetland Islands we cover for window mastic.

Work in ZE2 works the same way as everywhere else we cover. Streets in the area include Midgarth and Dandiegarth, all of which we cover. We also cover the places around Bremirehoull: Cunningsburgh (1 mile north), Mail (1 mile south), Aithsetter (1 mile north-east), Sandwick (3 miles south) and Hoswick (3 miles south). Within a short drive, we also cover Lerwick (8 miles north), Sound (7 miles north) and Scalloway (7 miles north). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.

Local landmarks in Bremirehoull

Green spaces nearby include Loch of Fladdabister.

Map of Bremirehoull © OpenStreetMap contributors

Surface by surface

Patio & French doors

Not every patio door leak is a mastic problem: worn seals, blocked drainage slots or a poor threshold detail can be the cause. We look for the cause first.

Window sills

Masonry sills can have joints where water gets in, and the joint under the frame can let rain run behind. We seal those with a sealant suited to masonry.

Why deal with it now?

Redecorating is a good moment to renew the mastic. Fresh joints finish the job neatly. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.

Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you are not sure whether it needs doing, send an email to info@mrmastic.co.uk and we will give you an honest view and a quote.

Why Bremirehoull customers choose us

  • Colour agreed with you before any work starts
  • A sealant colour to suit the surroundings
  • Rated 4.9 stars on Google
  • Neat joints and a tidy finish

See how sealant jobs are priced and our reviews.

What affects the quote in Bremirehoull

The price is agreed before any work begins. It takes into account:

  • The size of the job
  • The old material and how stubborn it is
  • Whether the work is at height
  • The product the joint needs

Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed. Ask us for a quote and we’ll explain what it covers.

Asking for a quote

When you call or email, it’s useful to know:

  • Whether it has been sealed before
  • The type of property
  • Pictures of the joints, sent by email
  • The rough size of the job

For window mastic in Bremirehoull, send an email to info@mrmastic.co.uk. Tell us what the problem is and where, and you’ll get a clear quote before we start.

Should I try it myself first?

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job