Kent · England
Way Remedial Sealant
Our applicators work in Way on removing failed, mouldy or leaking sealant and putting it right. Old sealant removed completely, joints prepared properly and a 12-month guarantee.
- Beads that never stuck properly
- Black mould underneath the bead
- Torn expansion joints
Remedial sealant in Way, done properly
Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. Typical jobs include kitchen joints letting water behind the worktop and over-sealed joints coming away, across leaking tray & enclosure joints, shrunken worktop sealant and botched or over-sealed joints.
For a small place like Way, remedial sealant is planned like any other job: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Where
- Way (CT12)
- Wider area
- Kent
- Cover
- One year on every job
- Quotes
- A clear quote up front
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
What remedial sealant looks like in Way
Way is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Rented homes near Minster station change hands often, and a joint that keeps failing is best fixed properly while the property is empty. Schools such as Minster Church of England Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. If you live in an older home near Church of Saint Mary the Virgin, walls and floors in older homes can move, and sealant and grout show it first.
Way is about 3 miles west of Ramsgate, in Kent. We provide remedial sealant to homes and businesses in Way and nearby. Our Kent coverage runs to 922 places, and Way is one of them. Our Chelmsford page covers work nearby.
Work in CT12 works the same way as everywhere else we cover. We cover properties on Wayborough Hill and Way Hill. Close by, we work in Mount Pleasant (1 mile north-west), Sevenscore (1 mile south-east), Minster (1 mile west), Acol (1 mile north-west) and Cliffs End (2 miles south-east). Further out, we also cover Canterbury (12 miles west), Margate (4 miles north-east), Dover (14 miles south), Ramsgate (3 miles east), Broadstairs (5 miles east) and Whitstable (13 miles west).
Around Way
Locally, jobs take us to homes and businesses close to Sandwich and Pegwell Bay and The Bell Inn, among other places. The closest station to Way is Minster station, about 0.9 miles south-west. Well-known places in the area include Westwood Cross (3.1 miles north-east) and Ramsgate General Hospital (3.5 miles east). Not far away are Sandwich and Pegwell Bay.
How the job changes by surface
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed in a colour to suit.
Movement & expansion joints
Some movement joints have been filled with mortar or grout. Where it can be raked out, we replace it with flexible sealant.
Aftercare tips
Aftercare is simple:
- Check trays and worktops do not move
- Don’t point over movement joints
- Do not wait for a small gap to become a leak
- Clean sealant with mild products only
If we have found a cause, such as a loose tray or a leaking waste, get it fixed, or the new joint may fail again.
Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Any of them means it’s time for remedial work.
More services for Way
What happens on the day
We bring everything the job needs with us, so there’s nothing for you to buy. Once we have agreed what’s being done, the area is protected and the work begins. It normally takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Way, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we work out whether the problem is the sealant, movement or a leak.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you’re told about anything else we found.
Getting ready for the visit
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
- Mention any leaks or damp you’ve noticed
Get a quote
Every job is quoted individually. Just ring 0345 464 0079 or send us an email with the details.
Related advice
Questions from Way
Do you cover smaller places like Way?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you do remedial sealant in Way?
Yes, Way is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or send us an email and tell us what needs doing, and we will give you a clear price.
How much does remedial sealant cost in Way?
It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or send us an email and tell us what needs doing and where.
Which products do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Are you insured?
Yes. Mr Mastic is fully insured.
Do I have to be there?
That depends on where the joints are. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Can you do several jobs on one visit?
Yes. Just list everything you need and you’ll get one quote.
How long does the work take?
The number of joints and layers decides it. You’ll have a timescale before any work begins.
Honest limits
To be straight with you, some problems need a different trade:
- A tray or bath that is cracked
- Sealant in an older building that needs testing for asbestos first
- Water damage behind tiles that needs a tiler
Not sure which it is? You can ring 0345 464 0079 or send us an email and we will tell you honestly before you book.
What we seal
- Failed movement joints
- Botched or over-sealed joints
- Expansion joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Shrunken worktop sealant
What affects the cost of remedial sealant
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Whether old sealant or filler has to be cut out
- Mould in or behind the old joints
- The number of rooms or windows
- When we can work, for business premises
Homes and businesses are quoted the same way: the amount of work, how we reach it and what it needs. Ask us for a quote and we’ll explain what it covers.
Asking for a quote
When you call or email, these details help:
- A few photos by email, if you can
- The problem you’ve noticed
- Whether it’s a home or a business
- The address or postcode of the job
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is.
Why act early in Way
Adding more sealant is the usual quick fix, and it rarely works. It does not grip the old layer, leaving the leak in place and one more layer to cut out later. Where a wall is exposed, as many are in small places like Way, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
What it costs depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before any work starts.
Why us?
- 4.9 on Google from 180+ five-star reviews
- 12-month guarantee on every job
- Anti-fungal silicone where joints get wet
- More than 20 years in sealant work
Take a look at how sealant jobs are priced or customer reviews.
DIY versus a professional finish
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Not every job suits DIY: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.