Kent · England
Acol Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right for homes and businesses in Acol and across Kent. Fully insured, ARBOMaster approved and guaranteed for a year.
- Thick, messy sealant smeared over tiles
- Kitchen joints letting water behind the worktop
- Mould trapped under a layer of silicone
Do you need remedial sealant in Acol?
Movement tears sealant that isn’t designed for it. A bath that flexes, a tray that rocks or a building joint that opens and closes will split a rigid or thin bead.
If you can see any of these, it’s time to have the joints looked at:
- Beads that never stuck properly
- Movement joints that have split or pulled away
- Over-sealed joints coming away
- Thick, messy sealant smeared over tiles
Letting a property close to Birchington-On-Sea station? Then failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Before booking anyone
- What product goes in the joint
- What happens if the job turns out different
- Is VAT in the price?
- How much experience the applicator has
About our remedial sealant in Acol
Two decades of sealant work means we recognise most failures quickly. We are fully insured ARBOMaster approved applicators, and every remedial job comes with a 12-month guarantee. If you have worktop sealant that has shrunk and split and leaks that keep coming back after resealing, we can help.
Around Acol, it’s houses and cottages rather than flats. Sealant and grout wear out here just as they do anywhere: old material cut out, joints cleaned and a fresh finish laid.
Big or small, it’s backed by our 12-month guarantee.
- Place
- Acol (CT7)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Work for landlords, hotels and businesses
Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
We work for landlords and letting agents as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order before the next move-in.
DIY sealant or a professional job?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
Questions from Acol
I let a flat near Birchington-On-Sea station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can go on one quote. You can ring 0345 464 0079 or send us an email with the details for a clear quote.
Can you do remedial sealant in Acol?
Yes, Acol is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or email us and let us know what needs doing.
Someone sealed over the old bead. Can you fix it?
Yes. It’s slower than a standard reseal, because every layer has to come out cleanly, but it’s what makes the new bead last.
Can you work on commercial sites?
Yes. Larger jobs can be planned room by room or area by area to suit the site.
Can you quote for more than one area?
Yes, we can. More than one area can go on one quote.
Can failed expansion joints be resealed?
Yes. Where mortar or filler has been used instead of sealant, it’s removed where it can be, and reseal with a flexible product.
How long does remedial resealing take?
Allow a few hours for most joints, depending on how much old sealant has to come out. We will give you a timescale when we quote.
How do I get a quote for remedial sealant in Acol?
Every job is different, so each one gets its own quote. For a quick quote, ring 0345 464 0079 or drop us an email with a short description of the job.
What sealant work can’t fix
Some problems need a builder, plumber or other trade rather than us:
- A tray or bath that’s cracked
- Sealant in an older building that needs testing for asbestos first
- A tray or worktop that needs refixing first
If in doubt, call 0345 464 0079 or email us and we will say what we think before booking.
Joints and surfaces we work on
- Failed movement joints
- Expansion joints
- Shrunken worktop sealant
- Botched or over-sealed joints
- Mouldy bath & shower sealant
- Leaking tray & enclosure joints
Remedial sealant around Acol
Acol is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
For an older house near a landmark such as St Mildreds Church, walls and floors in older homes can move, and sealant and grout show it first. For site and facilities teams at buildings such as Birchington Church of England Primary School, we reseal washrooms and kitchens in schools and businesses as well as homes.
Acol is about 4 miles south-west of Margate, in Kent. Our applicators cover remedial sealant for homes and businesses in Acol and nearby, as part of our work across Kent. Acol is one of 922 towns and villages in Kent where we work. For nearby work, see our Chelmsford page, about 44 miles away.
All of CT7 is covered for remedial sealant, from the main roads to the quietest streets. If you need remedial sealant at a property on The Street, Dilnot Lane and Margate Hill or a nearby road, we can help. If you are just outside Acol, we cover Mount Pleasant (1 mile south), Birchington (1 mile north), Way (1 mile south-east), Minster (2 miles south) and Westgate-on-Sea (2 miles north-east). Larger places within reach include Canterbury (11 miles south-west), Margate (4 miles north-east), Dover (15 miles south), Ramsgate (4 miles east), Broadstairs (5 miles east) and Whitstable (12 miles west).
What’s near Acol
In Acol, that means homes and buildings near King Ethelbert School and Crown & Sceptre pub, among other places. The nearest railway station is Birchington-On-Sea station, roughly 1.5 miles north. Other landmarks nearby include Queen Elizabeth the Queen Mother Hospital (3.6 miles north-east) and Powell-Cotton Museum (0.7 miles north). For a walk, there’s Sandwich and Pegwell Bay.
More services for Acol
Different surfaces, different methods
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, in a colour that suits the frame.
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. We treat the exposed joint once the bead is out.
What happens on the day
We bring everything the job needs with us. Once we have agreed what’s being done, we protect the area and start. It normally takes a few hours for most joints, depending on how much old sealant has to come out. Somewhere as small as Acol, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First we find out how and where the joint has failed.
- Every layer of old sealant is cut and cleaned out.
- The joint is cleaned, treated for mould and left to dry.
- Moving joints get backing and a flexible sealant to suit.
- The new joint is tooled neatly and we explain anything else we found.
Before we arrive
- Mention any tricky access
- Let us know about earlier repairs to the joints
- For indoor joints, keep the area dry beforehand if you can
Ask for a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and email photos if that is easy.
Related advice
What affects the cost of remedial sealant
Every job gets its own quote. This is what makes a difference:
- Any mould that needs treating
- The type of sealant required
- How much there is to do
- The number of rooms or windows
Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What we need to know
Photos by email are helpful but not essential. Please mention:
- The problem you’ve noticed
- How we’d reach the joints
- Where the job is, and your postcode
- If someone has resealed it before
Asking for a quote is easy: tell us what needs doing and where and its rough size. A few photos by email make the job easier to understand.