Highland · Scotland
Poolewe Remedial Sealant
Removing failed, mouldy or leaking sealant and putting it right in Poolewe, with a one-year guarantee on every job. Call for a quick quote.
- Black mould underneath the bead
- Floor or wall movement joints that have failed
- Decorators’ caulk around a bath or shower
What the job involves on each surface
Worktops & kitchens
Kitchen joints often have grease and cleaning residue deep in them, so cleaning takes longer than in a bathroom.
Windows & doors
Smeared or badly matched mastic can be cut out and redone neatly, in a colour that suits the frame.
Remedial sealant for homes and businesses in Poolewe
A joint that keeps failing usually has a reason. Movement, the wrong product or a leak from somewhere else will beat any new bead. We look for the cause before we reseal. We work on shrunken worktop sealant, mouldy bath & shower sealant and leaking tray & enclosure joints, and common reasons people get in touch are sealant peeling off a dusty or damp surface and black mould underneath the bead.
In and around a place like Poolewe, homes range from older stone-built properties to newer houses. Where a building moves, cracked grout and split sealant are normally the first signs.
We stand behind the work with a one-year guarantee.
- Where
- Poolewe (IV22)
- Region
- Highland
- Guarantee
- One year on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What else we do in Poolewe
Common problems we fix in Poolewe
Water from somewhere else can ruin a good seal. A leaking valve, a failed waste or cracked grout feeds water behind the bead, and the sealant lifts or goes mouldy from underneath.
The problems people generally mention when they call include:
- Kitchen joints letting water behind the worktop
- A shower that leaks however often it’s resealed
- Mould trapped under a layer of silicone
- Products that weren’t meant for the joint
In and around Poolewe, as anywhere, good remedial sealant starts with a clean, dry, properly prepared joint.
Questions to ask before you book
- When the joint can take water or movement
- What insurance they hold
- Who turns up on the day
- What guarantee comes with the work
Should I try it myself first?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
What we do, step by step
Good joint work is mostly preparation, and we don’t rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours for most joints, depending on how much old sealant has to come out. Outdoor work around Poolewe depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- First we work out whether the problem is the sealant, movement or a leak.
- Old beads and residue are removed down to clean surfaces.
- Mould is treated and the joint dried.
- We reseal with a product suited to the joint, backed where needed.
- We finish neatly and point out anything that needs another trade.
How to prepare
- Keep pets and children clear of the area while we work
- Clear the area around the work
- Mention any sign-in or site rules at work premises
Ask for a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job.
Read more
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- A bath, tray or worktop that moves until it’s properly fixed
- A leaking trap, valve or supply pipe
- Sealant in an older building that needs testing for asbestos first
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly.
Where we work in Poolewe
- Expansion joints
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
- Failed movement joints
- Shrunken worktop sealant
- Botched or over-sealed joints
For landlords and businesses
Landlords and agents in Poolewe can book us as well as homeowners. Sealant work between tenants is a simple way to keep a property in good order.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Common questions in Poolewe
Will you come out to Poolewe?
Yes. Poolewe is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Can you do remedial sealant in Poolewe?
Yes. We work across all of Scotland, and Poolewe is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing.
Can you work on commercial sites?
Yes. Hotels, offices and other businesses use us, and we’re fully insured.
How long will it take to strip and reseal the joint?
It takes a few hours for most joints, depending on how much old sealant has to come out. We’ll give you a timescale when we quote.
Can I add another job to the visit?
Yes, we can. More than one area can go on one quote.
Can you remove sealant that’s been put over old sealant?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
Do you remove the old sealant?
Yes. All of the old material is cut out and the joint cleaned.
How long before the joint can be used?
Cure times vary by product and the conditions. Before we leave, we will tell you the cure time.
Looking after it afterwards
So the new joints stay in good condition:
- Act on a lifting corner right away
- Air the bathroom so the sealant can dry
- Keep bleach and abrasives off the bead
- Check ceilings under showers for marks
Watch the joint over the first few weeks, especially if movement was the problem. If anything changes, just drop us a line at info@mrmastic.co.uk.
Mould trapped under over-sealed joints spreads unseen. When it finally shows, the whole bead needs to come out.
What remedial sealant looks like in Poolewe
Poolewe is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
For jobs in and around Poolewe, choosing the right material for each joint is as important as a tidy finish.
Poolewe is in Highland. From the centre of Poolewe to the outskirts, we cover remedial sealant for every kind of property, from flats and houses to offices and hotels. Across Highland, we cover 253 places, and Poolewe is one of them.
Postcode districts we cover here for remedial sealant: IV22. If you need remedial sealant at a property on Cliffton, Sydney's Way and St Maelrubha Close or anywhere close by, our applicators can take on the job. Close by, we work in Gairloch (4 miles south-west), Inverasdale (4 miles north-west), Lonemore (5 miles south-west), Aultbea (5 miles north) and Àird (5 miles north). Remote and island addresses need a little more planning, so please mention your location when you email us at info@mrmastic.co.uk.
Local landmarks in Poolewe
Green spaces nearby include Lochan Feoir.