Highland · Scotland
Remedial sealant & repairs in Inverasdale, Highland
Remedial sealant in Inverasdale from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- A shower that leaks however often it’s resealed
- Black mould underneath the bead
- Torn expansion joints
Remedial sealant in Inverasdale
Movement and expansion joints fail when the sealant can’t stretch. The old sealant comes out and backing goes in to control the depth, then a flexible sealant matched to the movement goes in. If you are dealing with a shower that leaks however often it’s resealed and dark patches showing through the sealant, we can put it right, on failed movement joints, shrunken worktop sealant and mouldy bath & shower sealant alike.
Bathrooms in smaller places like Inverasdale work just as hard as those in the cities. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
Every job is covered by a one-year guarantee, wherever you are in Highland.
- Where
- Inverasdale (IV22)
- Wider area
- Highland
- Cover
- A year, on every job
- Quote
- A clear price before we start
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
FAQs for Inverasdale
Is Inverasdale in your area for remedial sealant?
Yes, Inverasdale is within the area we cover. We work across all of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.
Is there a guarantee on remedial sealant in Inverasdale?
Every job comes with our one-year guarantee, wherever it is. We are fully insured, and an ARBOMaster approved applicator.
Do you work for letting agents?
Yes. We work for homeowners, landlords, letting agents, businesses and hotels in Inverasdale.
What if the leak is not the sealant?
We check for that before we reseal. If the fault is elsewhere, you will know before any work is done.
How long will it take to strip and reseal the joint?
A little longer than a standard reseal. Most jobs take a few hours.
Do you take out the old sealant first?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
How long should I leave it?
That depends on the sealant used, so follow the cure time we give you.
Is it worth trying it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs.
Surface by surface
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. It’s cut out, degreased and resealed colour-matched to the worktop.
Mouldy bath & shower sealant
Mould can sit behind the silicone, not just in it. Once it’s all removed, the joint is treated so the new sealant starts clean.
How to look after the new joints
Joint life depends on how it’s used and looked after. We suggest:
- Clean sealant with mild products only
- Look for stains below bathrooms now and then
- Find out why the sealant failed first
- Don’t add new sealant on top of old
Where we have pointed out another fault, have it put right, or the new joint may fail again.
Leaks through failed sealant grow over time. Each use pushes more water behind the bead, into floors, walls or ceilings. Early action keeps it to a sealant job.
The process
A visit follows a simple pattern: we look at the joints together, mask and protect the surrounding surfaces, carry out the job and clear up. Most jobs take a few hours for most joints, depending on how much old sealant has to come out. Somewhere like Inverasdale may be a longer drive, and the journey is planned ahead. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- Surrounding tiles, trays and frames are protected first.
- Every layer of failed sealant is stripped out.
- We clean and degrease the joint and look for signs of movement or water.
- Once dry, a suitable sealant is applied and tooled.
- We give you the cure time and explain what caused the failure.
Preparing for the visit
- Clear items away from the joints we’re working on
- Tell us about any water getting in
- Plan for the work area to be out of bounds to pets and children
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Related advice
More services for Inverasdale
DIY versus a professional finish
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.
A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Landlords, agents and businesses in Inverasdale
If you manage several properties in or around Inverasdale, several properties can be quoted together. Send us the addresses and the work at each.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
How we quote for remedial sealant
We quote each job individually. These are the things that affect it:
- Whether the work is at height
- Mould in or behind the old joints
- The old material and how stubborn it is
- Any working-time requirements on site
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Ask us for a quote and we’ll explain what it covers.
What to tell us for a quote
When you call or email, it’s useful to know:
- Pictures of the joints, sent by email
- What the problem is, such as mould, gaps, leaks or cracking
- How we’d reach the joints
- If someone has resealed it before
We quote each job on its own, so the first step is telling us about yours. Just send an email to info@mrmastic.co.uk with the details, and photos are welcome.
Inverasdale homes and their sealant
Inverasdale is within about 1 mile of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Around Inverasdale, as everywhere, remedial sealant is only as good as the preparation behind it. For jobs in and around Inverasdale, choosing the right material for each joint is as important as a tidy finish.
Inverasdale is in Highland. Inverasdale gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Our Highland coverage runs to 253 places, and Inverasdale is one of them.
We cover every part of the IV22 postcode area for remedial sealant and the streets around it. Being close to the B8057, Inverasdale is easy for our applicators to reach for remedial sealant. Nearby, we also carry out remedial sealant in Àird (3 miles north-east), Aultbea (4 miles north-east), Poolewe (4 miles south-east), Gairloch (6 miles south) and Laide (6 miles north-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Inverasdale
Nearby you will also find Arctic Convoy Museum (3.9 miles north-east). Open spaces near Inverasdale include Loch Sguod and Cnoc Breac.
What happens if it’s left?
Leaks that are left keep doing damage out of sight: soaked floorboards, ceiling stains below and blown plaster. Dealing with the joint now is a small job by comparison. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
What you get with us
- We never seal over old sealant
- Anti-fungal silicone where joints get wet
- Neat joints and a tidy finish
- 12-month guarantee on every job
See our cost guide or customer reviews.