Highland · Scotland
Evanton Remedial Sealant
Problem with your failed sealant joints in Evanton? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- A shower that leaks however often it’s resealed
- Sealant applied over old sealant that has lifted
- Products that weren’t meant for the joint
Landlord and commercial work in Evanton
Hotels need rooms back in use, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Remedial sealant for homes and businesses in Evanton
Remedial work is what we do when sealant has failed or been done badly. New sealant over old, smeared beads, unsuitable products and hidden mould all have to come out before the joint can be done properly. Common call-outs are for sealant peeling off a dusty or damp surface and repeat leaks from the same joint, across leaking tray & enclosure joints, failed movement joints and botched or over-sealed joints.
In and around a place like Evanton, homes range from older stone-built properties to newer houses. Where a building moves, cracked grout and split sealant are normally the first signs.
All our work comes with our 12-month guarantee.
- Where
- Evanton (IV16)
- Region
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Keep an eye on the ceiling below the bathroom
- Check trays and worktops do not move
- Always have old sealant cut out, not covered
- Act on a lifting corner right away
Where we have pointed out another fault, have it put right, because the new sealant cannot hold back a problem underneath.
Warning signs: peeling layers, mould showing through the bead, leaks after showering or cracks in a movement joint. Each one is worth getting looked at.
How we quote for remedial sealant
For a quick quote, just ask. What matters most is:
- How many areas need sealing
- Any working-time requirements on site
- Whether the work is at height
- The product the joint needs
Doing several joints on one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. We’ll send you a clear quote for the lot.
Asking for a quote
The more you tell us, the more accurate the quote. When you ask for a quote, tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- If it’s domestic, commercial or a hotel
- How many joints, rooms or windows are involved
- The address or postcode of the job
Want a quote for remedial sealant? Please send an email to info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Leave it or put it right?
A failed seal rarely means a new bathroom. When the fittings are sound, stripping and resealing the joints is often enough. Where something else has failed, you’ll hear it from us. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
What you get with us
- A sealant colour to suit the surroundings
- A choice of colours where the product allows
- 180+ five-star Google reviews
- You choose the colour before work begins
Take a look at what affects the cost or what customers say.
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours, depending on how many layers have to come out and we leave things clean and tidy. Outside jobs in Evanton need a dry day, because sealant won’t bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We look at how the sealant has failed and check for movement or a leak path.
- Every layer of old sealant is cut and cleaned out.
- We clean the joint, treat any mould and let it dry.
- Where the joint moves, backing and a flexible sealant suited to the movement go in.
- Finally we finish the joint and talk you through what we found.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Clear items away from the joints we are working on
- Let us know about earlier repairs to the joints
How to get a quote
We don’t publish a price list, as no two jobs are quite the same. Instead, we give you a clear quote for your job. To arrange one, send an email to info@mrmastic.co.uk.
Related advice
Also near Evanton
What else we do in Evanton
Different surfaces, different methods
Worktops & kitchens
Old kitchen sealant pulls back from the wall over time. We strip it, degrease the joint and reseal.
Movement & expansion joints
Joints filled with mortar, grout or rigid filler can’t move. We rake that out where it can be removed and seal with a flexible product.
When something else is needed
Before booking, it’s worth knowing the limits:
- A bath, tray or worktop that moves until it’s properly fixed
- Failed tanking or loose tiles behind the sealant
- Old mastic in a building from before 2000 that should be checked for asbestos before it’s disturbed
Not sure which it is? You can send an email to info@mrmastic.co.uk and we’ll tell you honestly before booking.
What we seal
- Leaking tray & enclosure joints
- Shrunken worktop sealant
- Mouldy bath & shower sealant
- Failed movement joints
- Botched or over-sealed joints
- Expansion joints
What remedial sealant looks like in Evanton
Evanton is within about 2 miles of the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Rented homes near Alness station change hands often, and botched sealant from a previous quick fix is easier to strip out between tenants. Around Evanton, as everywhere, remedial sealant is only as good as the preparation behind it.
Evanton (Gaelic: Baile-Eoghain) is about 14 miles north of Inverness, in Highland. Wherever you are in the IV16 postcode area, we can carry out remedial sealant at your property. Our Highland coverage runs to 253 places, Evanton among them.
We cover every part of IV16 for remedial sealant and the streets around it. You will find streets such as Station Road, Camden Street and Balconie Street. If you are just outside Evanton, we cover Cullicudden (3 miles south-east), Alness (4 miles north-east), Dalmore (4 miles north-east), Culbokie (4 miles south) and Dingwall (5 miles south-west). Within a short drive, we also cover Inverness (14 miles south), Cradlehall (15 miles south-east), Tain (14 miles north-east), Merkinch (13 miles south), Hilton (15 miles south) and Crown (14 miles south). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Local landmarks in Evanton
The closest station to Evanton is Alness station, about 3.9 miles north-east. A little further out are Balconie Castle (0.6 miles south-east) and Ross Memorial Hospital (5.6 miles south-west). Open spaces near Evanton include Cnoc Fyrish.
Evanton: your questions answered
Do you work for landlords with property near Alness station?
Yes. We work for landlords and letting agents as well as householders, and several properties can be quoted together. You can drop us a line at info@mrmastic.co.uk with the details for a clear quote.
Do you cover Evanton for remedial sealant?
Yes, Evanton is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Do you offer different sealant colours?
We’ll suggest a colour to suit the surroundings. The choice depends on the product the joint needs.
What do you need from me for a quote?
Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply email us at info@mrmastic.co.uk.
Should I try DIY first?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Where is Mr Mastic based?
Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
What do you put in the joint?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.