Argyll and Bute · Scotland
Remedial sealant & repairs in Ardbeg, Argyll and Bute
Failed sealant joints in Ardbeg need attention? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Repeat leaks from the same joint
- Products that weren’t meant for the joint
- A second bead peeling off the first
Your questions about remedial sealant in Ardbeg
Do you take on hotel work around Ardbeg?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
Do you cover Ardbeg for remedial sealant?
Yes. Our work covers the whole of Scotland, and Ardbeg is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing.
Do I need to be at home?
It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.
Can you fix a reseal that hasn’t worked?
Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, so we find that first.
Can you take off two layers of silicone?
Yes. Both layers come out; over-sealing fails because silicone will not bond to silicone.
Is it messy?
No. We protect the surfaces around the joints, and we tidy up before we go.
How do I get a quote for remedial sealant in Ardbeg?
Every job is different, so each one gets its own quote. For a quick quote, drop us a line at info@mrmastic.co.uk with a short description of the job.
Can tenants book the work?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Remedial sealant for homes and businesses in Ardbeg
Decorators’ caulk in a shower, bathroom silicone on a window, a rigid filler in a movement joint fails however neatly it’s applied. We take it out and use a sealant made for that joint. We’re often asked to deal with thick, messy sealant smeared over tiles and leaks that keep coming back after resealing, on failed movement joints, botched or over-sealed joints and expansion joints.
Being further from a city does not change the work: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. We just plan the journey and access beforehand.
You’re covered for a year from the day we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.
- Location
- Ardbeg (PA20)
- Region
- Argyll and Bute
- Guarantee
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
More services for Ardbeg
How the job changes by surface
Leaking trays & enclosures
A cracked tray, failed valve or leaking waste needs a different fix. We say so rather than reseal.
Over-sealed & botched joints
A thick bead smeared across tiles often hides mould or gaps. We strip it back so we can see the joint.
Ardbeg homes and their sealant
Ardbeg is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Scotland’s water is generally soft, so sealant and grout see less limescale than in much of England. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Schools such as Rothesay Academy are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Ardbeg is about 9 miles north-west of Largs, in Argyll and Bute. For remedial sealant in and around Ardbeg, it’s easy to get a quote: please send an email to info@mrmastic.co.uk. We cover Argyll and Bute from our Crawley base. Across Argyll and Bute, we cover 118 places, Ardbeg among them. You can also see our page for Glasgow, roughly 31 miles from Ardbeg.
Postcode districts we cover here for remedial sealant: PA20. You’ll find streets such as Ardbeg Road, Ardmory Road and Marine Place, all of which we cover. We also cover Port Bannatyne (1 mile north-west), Rothesay (1 mile south), Craigmore (1 mile south-east), Toward (3 miles east) and Innellan (5 miles north-east). Within a short drive, we also cover Dunoon (9 miles north-east), An Tairbeart (14 miles west) and Sandbank (10 miles north-east). If you’re somewhere remote, the job takes a little more planning, so let us know when you get in touch.
Local landmarks in Ardbeg
Nearby you will also find Victoria Hospital (1.6 miles south) and Rothesay Castle (1.2 miles south). Not far away are Greenan Loch and Kames Hill.
Aftercare tips
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Find out why the sealant failed first
- Clean sealant with mild products only
- Run the fan after every shower
- Do not wait for a small gap to become a leak
Leave the new joint to cure fully before it gets wet or moves: normally around 24 hours, or as long as we advise.
A split movement joint lets rain into walls and floors, and the longer it’s left, the more the joint edges break down. Resealing while the edges are sound is simpler.
What we cannot put right
To be straight with you, some problems need a different trade:
- Older mastics that may need an asbestos check before removal
- Water damage behind tiles that needs a tiler
- Plumbing leaks behind walls or under trays
If you are not sure, just email us at info@mrmastic.co.uk and we will give you a straight answer.
Surfaces we seal
- Expansion joints
- Failed movement joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Leaking tray & enclosure joints
- Mouldy bath & shower sealant
What happens if it’s left?
Ripping out a bathroom is not usually needed. When the fittings are sound, stripping and resealing the joints is often enough. If they’re not, we will tell you. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear quote before any work starts.
What you get with us
- Quality sealants from Arbo and Everbuild
- We leave the area clean and tidy
- You choose the colour before work begins
- An ARBOMaster approved applicator
See our cost guide and customer reviews.
What happens on the day
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The work itself takes a few hours for most joints, depending on how much old sealant has to come out from start to finish. Outdoor work around Ardbeg depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- The failure is looked at first, so we know whether it’s sealant, movement or water from elsewhere.
- Each layer is cut out and the residue cleaned off.
- We treat any mould and dry the joint thoroughly.
- We reseal with a product suited to the joint, backed where needed.
- The joint is tooled and you are told about anything else we found.
How to prepare
- Clear items away from the joints we’re working on
- On commercial sites, let us know about site rules
- Tell us if parking is tricky
How to get a quote
Every job is quoted individually, so start by telling us what you need. Simply email us at info@mrmastic.co.uk and describe the job and send photos if you have them.
Advice
What affects the cost of remedial sealant
Every job gets its own quote. This is what makes a difference:
- Any mould that needs treating
- How easy the joints are to reach
- The product the joint needs
- How much there is to do
What it costs depends on the size of the job, how much old material has to come out and access to the work. You’ll have a clear quote before any work starts, so you know where you stand.
What we need to know
When you call or email, it’s useful to know:
- Photos by email, if that is easy
- Roughly how big the job is
- Any previous sealing or DIY work
- The problem you’ve noticed
Want a quote for remedial sealant? Please send an email to info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Common problems we fix in Ardbeg
Silicone only bonds to surfaces that are clean and dry. Soap film, dust, damp or old residue stop it gripping, so it starts lifting sooner than it should.
Most people get in touch when they notice one of these:
- Dark patches showing through the sealant
- Beads that never stuck properly
- Kitchen joints letting water behind the worktop
- Sealant applied over old sealant that has lifted
If you live in an older home near Port Bannatyne Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant.
Before you book anyone
- How long to leave it before use
- How long the guarantee is
- Whether they’re fully insured
- What product goes in the joint