Argyll and Bute · Scotland
Innellan Remedial Sealant
Remedial sealant across Innellan and nearby, with old sealant always removed completely and a 12-month guarantee.
- Gaps opening along the back of the worktop
- Sealant applied over old sealant that has lifted
- Dark patches showing through the sealant
Signs you need remedial sealant in Innellan
Even good sealant ages. Mould grows into the silicone, the surface hardens and the bead shrinks, especially in damp, poorly aired rooms. Then the only fix is removal and a new bead.
Look out for any of the following:
- Sealant applied over old sealant that has lifted
- Decorators’ caulk around a bath or shower
- A shower that leaks however often it’s resealed
- Wide, uneven beads that look worse than the old ones
Around Innellan, as everywhere, remedial sealant is only as good as the preparation behind it.
Questions to ask before you book
- Whether the sealant suits the joint
- Whether they seal over old material or remove it
- Whether they’re fully insured
- What guarantee comes with the work
Remedial sealant in Innellan, done properly
In Innellan, as anywhere, remedial jobs tend to look alike: sealant over sealant, mould under the bead, leaks that come back and movement joints that have split. We strip each one back and start from scratch. We work on leaking tray & enclosure joints, failed movement joints and botched or over-sealed joints, and common reasons people get in touch are a second bead peeling off the first and kitchen joints letting water behind the worktop.
A bathroom in a place like Innellan gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
There’s a 12-month guarantee on every job, large or small.
- Location
- Innellan (PA23)
- Region
- Argyll and Bute
- Cover
- A year, on every job
- Price
- A clear price before we start
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Why it’s worth doing now in Innellan
A failed seal rarely means a new bathroom. If the bath, tray and tiles are sound, remedial resealing normally puts it right. If they’re not, we’ll tell you. Around Innellan, water from a failed joint in an older stone home can soak into timber and plaster.
A failed joint rarely gets cheaper to fix by waiting. If you’re unsure, email us at info@mrmastic.co.uk for an honest opinion and a quote.
Why book with us
- Old sealant always removed completely
- ARBOMaster approved applicator
- We agree the colour with you first
- 4.9 on Google from 180+ five-star reviews
See our cost guide and our reviews.
Bathrooms and kitchens in Innellan
Innellan is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
Rented homes near Wemyss Bay station change hands often, and failed or mouldy sealant is worth putting right between tenancies, before it turns into a leak.
Innellan is about 8 miles south-west of Greenock, in Argyll and Bute. For remedial sealant in and around Innellan, please send an email to info@mrmastic.co.uk for a quick quote. We are based in Crawley and cover Argyll and Bute. 118 places in Argyll and Bute are on our list, large and small. There’s also a page for Glasgow, about 27 miles away.
Our applicators cover all of the PA23 postcode area for remedial sealant. Streets in the area include Newton Road, Shore Road and Wyndham Road, and we cover them all. We also cover the places around Innellan: Toward (1 mile south-west), Wemyss Bay (3 miles east), Bullwood (3 miles north), Skelmorlie (3 miles south-east) and Inverkip (4 miles east). Further out, we also cover Helensburgh (12 miles north-east), Dunoon (5 miles north), Rothesay (5 miles south-west), Rhu (11 miles north-east), Garelochhead (14 miles north) and Port Bannatyne (5 miles south-west). For island and remote addresses, a little more planning is needed.
Landmarks near Innellan
For rail, the closest station is Wemyss Bay station, roughly 3 miles east. A little further out are Cowal Community Hospital (5 miles north) and Knockamillie Castle (0.6 miles north-east).
Different surfaces, different methods
Over-sealed & botched joints
A botched joint can hide two or three layers of sealant, and silicone residue is cleaned off the tiles too. Only a clean joint will take a new bead.
Movement & expansion joints
Bonding on three sides is a common reason movement joints tear. Backing stops that, so the sealant grips the two sides only.
For landlords and businesses
In hotels, rooms out of use cost money, so the work can be planned room by room. Hotel work is part of what we do, alongside homes and businesses.
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Look for stains below bathrooms now and then
- Act on a lifting corner straight away
- Check trays and worktops do not move
- Do not point over movement joints
Where we’ve pointed out another fault, have it put right, because the new sealant cannot hold back a problem underneath.
Mould trapped under over-sealed joints spreads unseen. By the time it shows through, the joint is well past saving.
Also near Innellan
More services for Innellan
How the visit works
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. After that, the work takes a few hours for a typical bath or shower, longer where several layers have been applied. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.
- Surrounding tiles, trays and frames are protected first.
- The botched or failed sealant is cut away completely.
- The joint is degreased and checked for movement and leaks.
- New sealant goes in once the joint is dry, and is tooled smooth.
- You get the cure time and our view on why the joint failed.
Before we arrive
- Mention any parking rules near the property
- Mention any tricky access
- Mention any leaks or damp you’ve noticed
Get a quote
For remedial sealant in Innellan, email us at info@mrmastic.co.uk. Tell us what the problem is and where, and we will agree the price before any work begins.
Read more
What we cannot put right
To be straight with you, there are a few things sealant will not fix:
- A cracked shower tray or bath (that needs repair or replacing)
- A tray or worktop that needs refixing first
- Plumbing leaks behind walls or under trays
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think.
Surfaces we seal
- Leaking tray & enclosure joints
- Botched or over-sealed joints
- Shrunken worktop sealant
- Failed movement joints
- Expansion joints
- Mouldy bath & shower sealant
Innellan: your questions answered
Is Innellan within the area you cover?
Yes. Innellan is within the area we cover, which takes in towns, villages and rural addresses. Our work covers the whole of Scotland. Just mention lanes, gates or anything else about the route when you book.
Is Innellan in your area for remedial sealant?
Yes. We work across all of Scotland, and Innellan is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll send you a clear quote.
Someone sealed over the old bead. Can you fix it?
Yes. We cut out all the layers and clean off the film, before resealing with a single bead.
Someone resealed my shower and it’s leaking again. Can you help?
Yes. Repeat leaks generally come from over-sealing, movement or water getting in elsewhere, and we deal with the cause first.
Can you reseal a split movement joint?
Yes. Failed movement joints are cut out and resealed with backing and a flexible sealant suited to the movement.
How long should I leave it?
That depends on the sealant used, so please follow the time we give you.
Will there be a smell?
Possibly a little. It fades as the sealant cures.
Can old silicone be taken off without scratching the tiles?
Yes. Careful removal is most of a remedial job, especially on acrylic, enamel and uPVC.