Highland · Scotland
Torness Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Torness and across Highland. Fully insured, ARBOMaster approved and guaranteed for a year.
- Shower grout that has worn away
- Cracked or crumbling grout lines
- Cracked grout along the bath or tray
Regrouting for homes and businesses in Torness
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. It can be a full room, or just the area that has failed. Either way, tiled areas in Torness are handled the same careful way. We work on bathroom floors, kitchen splashbacks and shower walls, and people most often call us about corners filled with grout instead of silicone and floor grout that won’t come clean.
Bathrooms in smaller places like Torness work just as hard as those in the cities. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
Big or small, it’s backed by our one-year guarantee.
- Where
- Torness (IV2)
- Region
- Highland
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What affects the cost of regrouting
Your quote is based on your job. We look at:
- Mould in or behind the old joints
- How many areas need sealing
- How easy the joints are to reach
- Whether old sealant or filler has to be cut out
The cost depends on the amount of work, how hard the old material is to remove and access to the work. We give a clear quote before work begins.
Asking for a quote
What to tell us when you ask for a quote:
- Photos by email, if that is easy
- If someone has resealed it before
- Where the job is, and your postcode
- The type of property
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, email us at info@mrmastic.co.uk.
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.
Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
Torness questions
Will you come out to Torness?
Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.
Is there a guarantee on regrouting in Torness?
All our work, in Torness and everywhere else, comes with a 12-month guarantee. We are fully insured, and an ARBOMaster approved applicator.
Can you do several jobs on one visit?
Yes. Just list everything you need and you will get one quote.
How do I get a quote for regrouting in Torness?
We don’t publish prices, because the cost depends on the job: its size, the old material, access and the product needed. You’ll get a clear quote before work begins.
Are you ARBOMaster approved?
Yes. We’re ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do you work for letting agents?
Yes. As well as homeowners, we work for landlords, agents, businesses and hotels.
Will there be a smell?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
Do you have insurance?
Yes, we are fully insured for every job we do.
Torness homes and their sealant
In Scotland, private landlords have to meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. Mould is another matter: a bathroom that stays damp still turns sealant and grout black.
Whether the job is in Torness itself or nearby, the right material for each joint matters as much as a neat finish. Around Torness, as everywhere, regrouting is only as good as the preparation behind it.
Torness is about 12 miles south-west of Inverness, in Highland. We carry out regrouting for homes and businesses in Torness. Torness is one of 253 places in Highland where we work. We also work in Dundee, around 78 miles away.
Every address in IV2 is within our area for regrouting. Main roads around Torness include the B862. We also cover the places around Torness: Lewiston (4 miles west), Drumnadrochit (4 miles west), Dores (5 miles north), Gorthleck (6 miles south-west) and Farr (8 miles north-east). We also work in nearby towns such as Inverness (12 miles north-east), Cradlehall (14 miles north-east), Merkinch (12 miles north), Hilton (11 miles north-east), Crown (12 miles north-east) and Millburn (13 miles north-east). For island and remote addresses, a little more planning is needed, so mention it when you ask for a quote.
Around Torness
Well-known places in the area include Urquhart Castle (2.9 miles west) and Urquhart Castle Visitor Centre (3 miles west). Green spaces nearby include Loch Ceo Glais.
When it isn’t the sealant
Before you book, it’s worth knowing the limits too:
- A floor or wall that keeps moving
- A leaking shower valve or waste
- Loose tiles, which need refixing first
If in doubt, drop us a line at info@mrmastic.co.uk and we will say what we think before you book.
Surfaces we seal
- Tiled floors
- Bathroom floors
- Kitchen splashbacks
- Wet rooms
- Shower walls
- Bathroom wall tiles
What the job involves on each surface
Shower walls
Shower walls get wet every day, so its grout takes the most punishment. It normally fails first.
Kitchen splashbacks
Splashback grout picks up grease and cooking stains. Once it’s stained, new grout is often the only fix.
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the work takes anything from a few hours to a full day, depending on the area for a typical job. In smaller Scottish places, parking is generally less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- Internal corners and edges are resealed.
Before we arrive
- Let us know if you’ve seen damp or leaks
- For business premises, tell us about site rules or sign-in
- Keep children and pets away from the work area
Ask for a quote
Every job is quoted individually, so start by telling us what you need. Just drop us a line at info@mrmastic.co.uk with the details.
Advice
Leave it or put it right?
Grouting over old grout rarely lasts. It sits thinly on top and soon flakes away, taking any repair with it. Raking out to a consistent depth gives the new grout something to hold. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
What you pay reflects the work, not guesswork. That is why we ask a few questions first.
Why book with us
- Fully insured
- Arbo and Everbuild products
- Over 20 years’ experience
- Anti-fungal silicone where joints get wet
Take a look at how sealant jobs are priced or our reviews.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Look at the sealant in the corners now and then
- Don’t use strong acidic cleaners on grout
- Skip wire brushes and scourers
- Wipe water off the walls when you are done
If a tile starts to feel loose, get it looked at early. Movement will crack the new grout and lets water in.
Grout that is washing out of a shower shouldn’t be left. Each shower drives water into the open joints and it can end up in the wall or the ceiling below.