Perth and Kinross · Scotland
Regrouting in Tarsappie
Tiled areas in Tarsappie need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Grout that stays dark however much it’s cleaned
- Grout that makes sound tiles look old
- A grout colour that no longer suits the room
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
How we handle regrouting in Tarsappie
Changing the grout colour is a simple way to update tiles. You might go from white to grey or back again. Tell us what you have in mind when you ask for a quote. Common call-outs are for floor grout that has worn and darkened and discoloured grout on otherwise sound tiles, across tiled floors, bathroom floors and bathroom wall tiles.
In and around a place like Tarsappie, homes range from older stone-built properties to newer houses. Older buildings can move a little, and that shows first in cracked grout and split sealant.
There’s a 12-month guarantee on every job, whatever its size.
- Place
- Tarsappie (PH2)
- Region
- Perth and Kinross
- Guarantee
- 12 months on all our work
- Quote
- Quoted before any work starts
- info@mrmastic.co.uk
- Page updated
- 26 October 2026

Also near Tarsappie
More services for Tarsappie
What affects the quote in Tarsappie
There’s no set price list, because no two jobs are the same. What we look at:
- Any mould that needs treating
- How much there is to do
- How many areas need sealing
- The product the joint needs
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.
Asking for a quote
To make quoting easier, please include:
- Any previous sealing or DIY work
- The type of property
- How we’d reach the joints
- The problem you’ve noticed
Asking for a quote is easy: let us know the job and the location. A few pictures by email make the job easier to understand, and we’ll take it from there.
The process
At the end, we look at the finished work together. The work normally takes anything from a few hours to a full day, depending on the area, depending on how much there is to do. Outdoor work around Tarsappie depends on the weather, as sealant needs a dry surface, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- Every tile area is checked for hollow or loose tiles first.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- Silicone goes into the corners and along the edges.
Preparing for the visit
- On commercial sites, let us know about site rules
- Clear the area around the work
- Let us know about parking restrictions
Getting a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Read more
What the job involves on each surface
Corners and edges
Corners flex as the building moves, so we seal them rather than grout them.
Bathroom wall tiles
We can regroute all the walls in a bathroom, depending on the area. It’s a good time to change the grout colour.
Landlord and commercial work in Tarsappie
Whether it’s one flat or a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements.
Your questions about regrouting in Tarsappie
Do you work for landlords with property near Perth station?
Yes, landlords and agents are among the people we work for. Just email us at info@mrmastic.co.uk with the address and what needs doing, and we will send you a clear quote.
Do you take on hotel work around Tarsappie?
Yes, we work for hotels as well as homes and businesses. Rooms can be done a few at a time, so the building stays open.
Do you guarantee regrouting?
Our one-year guarantee covers every job.
Will the sealant be renewed as well as the grout?
Normally, yes. Corners and edges need flexible silicone, and it makes sense to renew both together.
Is it messy?
Very little: the area around the joints is protected first, and we tidy up before we go.
Will regrouting fix loose tiles?
If tiles are loose, something behind them has usually failed. Regrouting alone isn’t the answer, and we’ll tell you before we start.
Where is Mr Mastic based?
We are a Crawley-based firm, with over 20 years’ experience. Our area covers South East England, London and Scotland.
What sealant do you use?
Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.
What we cannot put right
A few problems are outside what sealant work can do:
- A leaking shower valve or waste
- Tiles that are loose or hollow behind
- Failed tanking or waterproofing under the tiles
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly.
What we seal
- Kitchen splashbacks
- Wet rooms
- Bathroom floors
- Tiled floors
- Shower walls
- Bathroom wall tiles
Leave it or put it right?
Colouring the surface of old grout is a quick cosmetic fix. They will not fill gaps or keep water out, and stains can show through again. Raking out and regrouting replaces the grout itself. Out of town in Scotland, exposed walls take a lot of weather, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. Your quote takes all of that into account.
Why Tarsappie clients choose us
- Every job guaranteed for a year
- We leave the area clean and tidy
- 180+ five-star Google reviews
- Trusted Arbo and Everbuild sealants
Read our cost guide or our reviews.
Regrouting in Tarsappie: local notes
Tarsappie has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
Letting a property close to Perth station? Then a regrout while the flat is empty is quicker than working around a tenant. In and around Tarsappie, as anywhere, good regrouting starts with a clean, dry, properly prepared joint.
Tarsappie is about 2 miles south-east of Perth, in Perth and Kinross. Homes, rented property, offices and hotels in Tarsappie can book us for regrouting. Every job comes with our 12-month guarantee. 107 places in Perth and Kinross are on our list, large and small. For nearby work, see our Dundee page (18 miles or so).
Work in PH2 is quoted and booked the same way as anywhere else. We also cover the places around Tarsappie: Scoonieburn (1 mile west), Bridge of Earn (2 miles south), Oakbank (2 miles north-west), Perth (2 miles north-west) and Forgandenny (3 miles south-west). Further out, we also cover Blairgowrie and Rattray (15 miles north), Auchterarder (12 miles south-west), Kinross (11 miles south), Letham (3 miles north-west), Scone (3 miles north) and Tulloch (4 miles north-west).
Around Tarsappie
The closest station to Tarsappie is Perth station, about 1.7 miles north-west. A little further out are St John's Shopping Centre (1.8 miles north-west) and Perth Museum (1.8 miles north-west). For a walk, there’s Moncreiffe Hill.
