Perth and Kinross · Scotland

New-build mastic & snagging in Tarsappie, Perth and Kinross

Professional new build mastic in and around Tarsappie, with every bit of old sealant taken out first.

  • Skirting joints opening in the first winter
  • Frame joints opening as the plaster dries
  • Messy sealant that spoils new finishes

Need new build mastic in Tarsappie?

New build mastic in Tarsappie, done properly

If your new home has a leaking shower seal, open skirting joints or untidy sealant, we can help. If you’re still within the builder’s snagging or warranty period, tell them first. If you have new-build shower sealant that has already split and sealant work across a run of new homes, we can put it right, whatever the surface.

Around smaller Scottish places like Tarsappie, new homes tend to be single plots or small developments. Each needs its sealant and floor joints finished as carefully as on a big site.

The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.

Where
Tarsappie (PH2)
Wider area
Perth and Kinross
Guarantee
A year, on every job
Quotes
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026
Fresh white silicone going into the corner where a shower screen meets the tiled wall

The process

There is not much for you to do on the day. Point us to the joints and we’ll get on with it. The work itself takes a few hours for most snagging lists, longer for a run of plots from start to finish. For a place like Tarsappie, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. Each joint is checked for movement before work begins.
  2. Old sealant is cut out and the joints cleaned.
  3. We make sure the joints are dry and prime them if needed.
  4. New sealant goes in, with baths filled first so they’re at their heaviest.
  5. The finished joints are checked and the cure times given.

Preparing for the visit

  • Mention any parking rules near the property
  • Plan for the work area to be out of bounds to pets and children
  • Mention if the joints have been sealed before

Get a quote

Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we’ll talk you through the work.

Ask for a quote

Read more

Landlord and commercial work in Tarsappie

For anyone letting property in or around Tarsappie, several properties can go on one quote. Just tell us the addresses and what each one needs.

Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.

Common problems we fix in Tarsappie

On many sites, sealant goes on in the final rush before handover. Dusty, unprimed joints are common, and the sealant sits on grit instead of the surface.

Look out for these signs:

  • Leaking shower tray seals in a new home
  • Gaps between new skirting and floors
  • Gaps opening as the house dries out and settles
  • Smeared, uneven beads picked up at snagging

In and around Tarsappie, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.

Questions to ask before you book

  • Whether you can choose the colour
  • When the joint can take water or movement
  • What happens if the job turns out different
  • Whether all the old sealant comes out first

Choosing a sealant specialist

Surface by surface

Plot handovers

Plot mastic is carried out to the developer’s schedule. Joints are prepared properly before sealing.

Bathrooms and en suites

Baths, showers, basins and trays in new bathrooms are the most common new-build reseal. The old sealant comes out and anti-fungal sanitary silicone goes in after cleaning and priming.

Honest limits

We will always be straight with you, so here’s what sealant can’t fix:

  • Movement caused by a poorly fitted tray or bath
  • Cracking that points to a structural problem
  • Disputes or warranty claims with your builder

If you’re not sure, just send an email to info@mrmastic.co.uk and we will give you a straight answer before booking.

Surfaces we seal

  • Windows & doors
  • Bathrooms & en suites
  • Skirting & floors
  • Kitchens
  • Show homes
  • Plot handovers

Why it’s worth doing now in Tarsappie

A hairline gap at a skirting can wait, but water getting through can’t. Not sure whether yours can wait? You can email us at info@mrmastic.co.uk with a few pictures and we’ll tell you. Exposed walls in smaller Scottish places take a lot of wind and rain, and once water gets behind a failed joint, damp in stone or harled walls is slow to dry out.

Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. Your quote takes all of that into account.

Why Tarsappie customers choose us

  • An ARBOMaster approved applicator
  • You choose the colour before work begins
  • More than 20 years in sealant work
  • Rated 4.9 stars on Google

Take a look at our cost guide or what customers say.

Questions from Tarsappie

Can you do new build mastic in Tarsappie?

Yes, Tarsappie is within the area we cover. Our work covers the whole of Scotland. Just email us at info@mrmastic.co.uk with a few details of the job.

Can you help a landlord with a rental near Perth station?

Yes, we work for landlords and agents. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we’ll send you a clear quote.

How long will you be here?

As a guide, most jobs take anything from a few hours to several days, depending on the number of plots. Bigger jobs take longer, and we’ll tell you how long to expect.

Can you reseal over the builder’s sealant?

No. Fresh silicone does not stick to the old layer, so it soon lifts and traps water. We cut the old bead out completely.

Can I do it myself?

That depends on the joint. High-level, external movement and fire-rated joints are professional jobs.

Will you leave a mess?

No. The area is protected while we work and cleaned up afterwards.

When is the best time to reseal in a new build?

Any seal that’s leaking should be redone right away. Cosmetic gaps can wait until the first year or two of movement has passed.

Will the old sealant be removed?

Always. Sealing over old sealant is the main reason resealing fails early, so we never do it.

What affects the quote in Tarsappie

Every job gets its own quote. This is what makes a difference:

  • Whether there’s mould to deal with
  • The old material and how stubborn it is
  • How easy the joints are to reach
  • Any working-time requirements on site

Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Ask us for a quote and we will explain what it covers.

What to tell us for a quote

When you contact us, it’s useful to know:

  • Access, such as stairs, a lift or height
  • What’s wrong with the joints now
  • The rough size of the job
  • Pictures of the joints, sent by email

Want a quote for new build mastic? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.

Joints and finishes in Tarsappie homes

Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up.

For new homes near Perth station, it’s worth checking the sealant early, while snags are still fresh.

Tarsappie is about 2 miles south-east of Perth, in Perth and Kinross. We provide new build mastic to homes and businesses in Tarsappie and the surrounding area. Across Perth and Kinross, we cover 107 places, and Tarsappie is one of them. You can also see our page for Dundee, roughly 18 miles from Tarsappie.

We work across PH2 for new build mastic. Neighbouring places we cover for new build mastic include Scoonieburn (1 mile west), Bridge of Earn (2 miles south), Oakbank (2 miles north-west), Perth (2 miles north-west) and Forgandenny (3 miles south-west). Further out, we also cover Blairgowrie and Rattray (15 miles north), Auchterarder (12 miles south-west), Kinross (11 miles south), Letham (3 miles north-west), Scone (3 miles north) and Tulloch (4 miles north-west).

Local landmarks in Tarsappie

The nearest railway station is Perth station, roughly 1.7 miles north-west. Nearby you’ll also find St John's Shopping Centre (1.8 miles north-west) and Perth Museum (1.8 miles north-west). The countryside around Tarsappie includes Moncreiffe Hill.

Map of Tarsappie © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job