Perth and Kinross · Scotland

Regrouting in Perth

Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Perth and across Perth and Kinross. Fully insured, ARBOMaster approved and guaranteed for a year.

  • Dirty, worn grout on a tiled floor
  • Cracked grout along the bath or tray
  • Cracked or crumbling grout lines

Need regrouting in Perth?

What the job involves on each surface

Bathroom wall tiles

Splash areas around basins and baths stain first. We can do part of a wall or all of it.

Bathroom floors

Floor grout takes foot traffic as well as water. It gets worn and dirty.

Regrouting in Perth, done properly

Stained, crumbling or cracked grout can make a sound bathroom look tired. With regrouting, the tiles stay and only the grout is renewed, so there’s no stripping out and no new tiles to choose. If you’re dealing with cracked grout along the bath or tray and a grout colour that no longer suits the room, we can put it right.

In a town like Perth, stone-built older streets usually sit alongside harled houses and newer estates. Whatever the age of the house, sealant and grout wear out in the end.

The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.

Sealant gun being used along the bath-to-tile joint in a beige tiled bathroom
Place
Perth (PH1, PH2)
Region
Perth and Kinross
Guarantee
12 months on all our work
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Last updated
26 October 2026

When to call us in Perth

Grout is porous, so water, soap and grime soak into it. Over time it stains, softens and starts to crumble, especially in a shower that’s used every day.

Common reasons people contact us are:

  • Shower grout that has worn away
  • Good tiles let down by tired grout
  • Grout stained black or orange that won’t clean
  • Grout in corners that has cracked

Managing a site like Perth High School? Then its toilets, changing areas and kitchens need their sealant renewed like any other building’s.

Before you book anyone

  • Are they insured?
  • How the joint is cleaned and prepared
  • The length of the guarantee
  • Whether they seal over old material or remove it

Our hiring checklist

Questions from Perth

Is Perth in your area for regrouting?

Yes, Perth is within the area we cover. Our work covers the whole of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear price.

Do you work in hotels near Perth?

Yes, we work for hotels as well as homes and businesses. A room-by-room programme keeps most rooms in use while the work goes on.

What sealant do you use?

Each joint gets the product that suits it. Movement, water and weather all affect the choice, and we will explain our choice.

Do you have insurance?

Yes, we’re fully insured.

What goes in the corners, grout or silicone?

Corners get silicone, not grout. They flex and grout can’t take that movement.

What if some of my tiles are loose?

Tiles that have come away need sorting first. We will point them out before any grout comes out.

How much does regrouting cost in Perth?

There’s no set price, as it depends on the job: its size, the old material, access and the product needed. We agree the price before any work begins.

What do you need from me for a quote?

Just the basics: the address or postcode, what’s wrong and any access issues. Then drop us a line at info@mrmastic.co.uk.

Regrouting in Perth: local notes

Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in. There are hotels and other places to stay in and around Perth. Hotel bathrooms are part of our work as well as homes, and can be done room by room.

Letting a property close to Perth station? Then stained grout drags a rental down, and regrouting between lets puts that right.

Perth is about 33 miles north of Edinburgh, in Perth and Kinross. Perth gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. Across Perth and Kinross, we cover 107 places, Perth among them. You can also see our page for Dundee, roughly 19 miles from Perth.

Work in PH1 and PH2 is quoted and booked the same way as anywhere else. Regrouting is available to properties on Simpson Square, High Street and Moredun Square. Perth sits on or near the A9 and A85. Other places close to Perth include Oakbank (1 mile south-west), Scoonieburn (2 miles south-east), Tarsappie (2 miles south-east), Milltown of Aberdalgie (3 miles south-west) and Forgandenny (4 miles south). Within a short drive, we also cover Blairgowrie and Rattray (14 miles north), Crieff (15 miles west), Auchterarder (12 miles south-west), Kinross (13 miles south), Coupar Angus (12 miles north-east) and Rattray (14 miles north). Perth is one of the larger places we cover in Perth and Kinross.

What’s near Perth

We work in homes and buildings around North Inch, Public House and St John's Academy and the streets around them. The closest station to Perth is Perth station, about 0.7 miles south-east. Nearby you will also find Murray Royal Hospital (1.2 miles east) and Balhousie Castle (0.6 miles north-east). Not far away are St Magdalene's Hill.

Map of Perth © OpenStreetMap contributors

Looking after it afterwards

So the new joints stay in good condition:

  • Keep the fan on after showering
  • Use a soft brush rather than a wire one
  • Use gentle cleaners on grout
  • Don’t ignore a tile that feels loose

Use a gentle cleaner on the grout with a soft brush. Avoid neat bleach and strong acid descalers, as they can break grout down.

Small problems with grout are quick to put right. Left for a few years, they can become a leak so it’s worth dealing with as soon as you spot it.

Leave it or put it right?

Bleach can lighten stained grout for a while, but mould that has got into grout normally comes back. Replacing the grout and resealing the edges is a lasting fix. For landlords in Perth, damp and leaks can fall under the Repairing Standard. Replacing failed sealant early is simpler than dealing with a complaint.

Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we’ll explain what it covers.

Why Perth customers choose us

  • ARBOMaster approved applicator
  • More than 20 years in sealant work
  • Every job guaranteed for a year
  • 180+ five-star Google reviews

See what affects the cost or our reviews.

The process

We keep the work tidy and contained to the joints we are treating. The job usually takes anything from a few hours to a full day, depending on the area, and we explain the cure time before we leave. Parking around Perth is rarely difficult, though older streets in the centre can be tight. If you are in a flat with a shared stair or a door entry system, let us know when you book.

  1. We agree the area to be regrouted and point out any loose tiles.
  2. We remove the old grout carefully.
  3. Dust is cleared from every joint.
  4. The new grout goes in, then the tile faces are cleaned.
  5. We renew the silicone at the corners and edges.

How to prepare

  • On commercial sites, let us know about site rules
  • Where the joints are inside, avoid wetting them before we arrive
  • Clear items away from the joints we are working on

How to get a quote

Want a quote for regrouting? Please email us at info@mrmastic.co.uk with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.

Get a price

Read more

For landlords and businesses

Businesses can book us for washrooms, kitchens, offices and more. On commercial sites, working times can be discussed when we quote.

Failed sealant is one of the commonest items on a check-out report. We can quote for more than one property at once.

DIY versus a professional finish

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and getting the depth right matters as much as the look.

Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job