Perth and Kinross · Scotland
Regrouting in Murthly
Raking out old, cracked or stained grout and regrouting tiled walls and floors for householders, landlords and businesses in Murthly. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Good tiles let down by tired grout
- Gaps where the shower grout has gone
- Crumbling grout between the tiles
Regrouting in Murthly, done properly
A bathroom with good tiles can still look worn if the grout has gone. With regrouting, the tiles stay and only the grout is renewed, so there’s no stripping out and no new tiles to choose. We work on tiled floors, shower walls and kitchen splashbacks, and people most often call us about corners filled with grout instead of silicone and grout that makes sound tiles look old.
A bathroom in a place like Murthly gets the same daily wear as one in a city flat. Generally soft Scottish water means less limescale, but steam still lets mould into sealant and grout.
A one-year guarantee comes as standard, so you’re covered after we have gone.
- Location
- Murthly (PH1)
- Wider area
- Perth and Kinross
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What we can’t put right
We’d rather tell you now than do work that won’t last, so these are the limits:
- A leaking shower valve or waste
- A structure that flexes behind the tiles
- Failed tanking or waterproofing under the tiles
If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before booking.
Surfaces we seal
- Shower walls
- Bathroom floors
- Bathroom wall tiles
- Kitchen splashbacks
- Tiled floors
- Wet rooms
What regrouting looks like in Murthly
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Failed sealant around a bath or shower is worth sorting between tenancies. Scottish Water supplies are generally soft, so limescale is less of a problem than in hard-water areas. But mould still grows into sealant and grout in a room that does not dry out.
If you live in an older home near United Presbyterian Church, older homes can move a little, which is hard on rigid grout and tired sealant.
Murthly is about 6 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. We provide regrouting to homeowners, landlords and businesses in Murthly. Murthly is one of 107 places in Perth and Kinross where we work for regrouting. Our Dundee page covers work nearby.
Our applicators cover all of PH1 for regrouting and the streets around it. Local streets include Macduff Way, Bruce Drive and Kinclaven Road, all of which we cover. If you’re just outside Murthly, we cover Gellyburn (1 mile north-west), Caputh (1 mile north-west), Spittalfield (2 miles north), Middleton (2 miles north-west) and West Tofts (3 miles south). Within a short drive, we also cover Perth (9 miles south), Blairgowrie and Rattray (6 miles north-east), Letham (9 miles south), Scone (8 miles south), Tulloch (8 miles south) and Alyth (11 miles north-east).
Around Murthly
The closest station to Murthly is Dunkeld & Birnam station, roughly 4.9 miles north-west. Nearby you will also find Murthly Castle (2.2 miles north-west) and Blairgowrie Community Hospital (5.8 miles north-east). For a walk, there’s Birnam Hill and Lily Loch.
When to call us in Murthly
A bathroom that stays damp keeps the grout wet, giving mould a place to grow. When black spots keep returning, the mould has normally got into the grout.
Most people get in touch after spotting one of these:
- Greasy, stained grout behind the hob
- Cracked grout along the bath or tray
- Grout stained black or orange that won’t clean
- Dirty, worn grout on a tiled floor
For landlords with property near Dunkeld & Birnam station, clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Questions to ask before you book
- Are they insured?
- How the surfaces are prepared before sealing
- What happens if the job turns out different
- Whether the sealant suits the joint
What affects the cost of regrouting
We do not publish a price list, because jobs vary so much. The quote depends on:
- When we can work, for business premises
- The size of the job
- How many rooms, windows or areas are involved
- The type of sealant required
We don’t show prices on the website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
What we need to know
When you contact us, these details help:
- Photos by email, if that is easy
- If it’s domestic, commercial or a hotel
- Roughly how big the job is
- Any access issues, like height or stairs
For a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
For landlords and businesses
From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.
Aftercare tips
To keep the joints looking good and working properly:
- Check the corner silicone every few months
- Clean grout with a mild bathroom cleaner
- Use a soft brush rather than a wire one
- Use a squeegee on the tiles after showering
Have any tile that moves checked straight away. A loose tile cracks the grout around it and lets water in.
Fixing grout early is a small job. Left for a few years, they can become a leak, so get it looked at when you notice it.
FAQs for Murthly
Is Murthly in your area for regrouting?
Yes. Our work covers the whole of Scotland, and Murthly is part of that. You can drop us a line at info@mrmastic.co.uk and let us know what needs doing, and we’ll send you a clear quote.
I let a flat near Dunkeld & Birnam station. Can you help?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can send an email to info@mrmastic.co.uk with the details for a clear quote.
Do you take out the old sealant first?
Yes, every time. New sealant won’t bond properly to old, so the joint is cleaned back first.
Will the sealant be renewed as well as the grout?
Normally we do both. Grout and sealant do different jobs, so we renew both and include it in your quote.
Should I try DIY first?
Sometimes. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.
Will there be a smell?
There can be a smell while the sealant cures, but it fades. Ventilation helps.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
Can you quote for more than one area?
Of course. Doing several areas at once is usually more efficient.
Why deal with it now?
It’s tempting to fill a few cracks yourself, but the patches often do not match, and the old grout keeps failing around them. Doing the full area gives you one colour and sound joints throughout. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
What it costs depends on the amount of work, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts, so you know where you stand.
What you get with us
- Approved under the ARBOMaster scheme
- Neat joints and a tidy finish
- Domestic, commercial and hotel work
- One-year guarantee on every job
Read what affects the cost and customer reviews.
Towns and villages near Murthly
What else we do in Murthly
The process
The work is kept neat and contained to the area we’re working on, so you can get on with your day. The job generally takes anything from a few hours to a full day, depending on the area, and we tell you how long to leave it before we go. Outside jobs in Murthly need a dry day, because sealant won’t bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- First we agree what’s being done and flag any loose tiles.
- We remove the old grout carefully.
- Dust is cleared from every joint.
- We grout the joints and wipe the tiles clean.
- Internal corners and edges are resealed.
Getting ready for the visit
- Clear the area around the work
- Keep pets and children clear of the area while we work
- Let us know about earlier repairs to the joints
Get a quote
We quote each job on its own, so start by telling us what you need. Simply send an email to info@mrmastic.co.uk and describe the job, and photos are welcome.