Greater London · England
Mill Meads Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for Mill Meads, backed by a one-year guarantee. Call for a quick quote.
- Crumbling grout between the tiles
- Grout that makes sound tiles look old
- Dirty, worn grout on a tiled floor
Regrouting for homes and businesses in Mill Meads
Changing the grout colour is a simple way to update tiles. Light grout can go darker to hide marks, or the other way round. Just mention the colour you’d like when you call 0345 464 0079 or drop us an email. Common call-outs are for discoloured grout on otherwise sound tiles and grout that stays dark however much it’s cleaned, on shower walls, wet rooms and kitchen splashbacks.
In much of London, period terraces have been converted into flats over the years, and bathrooms were often squeezed into small rooms. Small, steamy rooms are where mould gets into sealant and grout fastest, and homes in Mill Meads are no different.
You get a 12-month guarantee, the same in Mill Meads as everywhere else we work.
- Location
- Mill Meads (E3, E15, E14)
- Wider area
- Greater London
- Guarantee
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Can I do it myself?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
When something else is needed
To be straight with you, there are a few things sealant will not fix:
- Movement in a stud wall or floor
- Leaks from pipes, valves or wastes (a plumber’s job)
- Damaged tiles that need replacing
If you’re not sure, just ring 0345 464 0079 or drop us an email and we’ll give you a straight answer before booking.
What we seal
- Bathroom floors
- Shower walls
- Wet rooms
- Bathroom wall tiles
- Tiled floors
- Kitchen splashbacks
Places near Mill Meads
More services for Mill Meads
What affects the cost of regrouting
Jobs vary more than people expect. The main factors:
- The type of sealant required
- Access and height
- Working hours on commercial sites
- How much old sealant there is and how hard it is to remove
What it costs depends on how much there is to do, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts, so you know where you stand.
What we need to know
When you contact us, these details help:
- Whether it’s a home or a business
- Whether it has been sealed before
- Roughly how big the job is
- Any access issues, like height or stairs
Need a quote? Please call 0345 464 0079 or email us with a few details. You’ll know what we plan to do, and what it will cost, before any work begins.
FAQs for Mill Meads
Can worn sealant in a flat in Mill Meads cause a leak downstairs?
Yes, it can. Water that gets past failed sealant or cracked grout can run under the bath or tray and show up on the ceiling below. It’s far simpler to replace tired sealant early than to deal with a neighbour’s ceiling.
Is parking a problem for a job in Mill Meads?
It can be, so it helps to tell us about permits, visitor bays or off-street space when you book. That way the visit can be planned around it.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.
Do you regrout part of a bathroom, like the shower?
We can. We’ll look at the rest of the room too and let you know if more needs doing.
What does regrouting cost?
Every job is different, so each one gets its own quote. For a quick quote, phone 0345 464 0079 or email us and let us know what needs doing and where.
Where are you based?
Our base is in Crawley, and we work across South East England, London and Scotland.
Is regrouting a chance to pick a new grout colour?
It can. With the old grout removed, the new colour fills the whole joint rather than sitting on top.
Can you regrout if a few tiles are loose?
Loose tiles need refixing before regrouting. We’ll point them out at the start.
Regrouting around Mill Meads
In a London flat, water from a failed bath or shower seal can reach the neighbours below, so tired sealant is best dealt with early. Mill Meads has hotels and guest accommodation nearby. As well as homes, we work in hotel bathrooms, where resealing and regrouting can be done room by room.
Rented homes near West Ham station change hands often, and a regrout while the flat is empty is quicker than working around a tenant. Mill Meads is in London, so parking needs planning: let us know about parking bays, permits or a driveway.
Mill Meads is about 1 mile south of Stratford, in Greater London. We carry out regrouting for homeowners, landlords and businesses in Mill Meads and nearby. We cover 764 towns and villages across Greater London, from the larger towns to small villages.
Every address in E3, E15 and E14 is covered for regrouting. Local streets include Gay Road, Bruce Road and Edgar Road, and we cover them all. We also cover Three Mills (1 mile north), Bromley (1 mile south-west), Old Ford (1 mile north-west), Bow (1 mile west) and Bow Common (1 mile south-west). Within a short drive, we also cover London (4 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (9 miles west), St Pancras (5 miles west) and Shoreditch (3 miles west).
What’s near Mill Meads
In Mill Meads, that means homes and buildings near Bob's Park, Rose and Crown pub and Manorfield Primary School and the streets around them. Mill Meads’s nearest station is West Ham station, roughly 0.5 miles east. Well-known places in the area include Stratford Centre (1 mile north) and St Clement's Hospital (0.9 miles west). The countryside around Mill Meads includes Hollow Pond and Old Ford Island.
What we do, step by step
Good joint work is mostly preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes a few hours for a shower enclosure, longer for a whole room. In Mill Meads, as in most of London, parking needs a little planning. It helps if you can point us to a visitor permit or a bay close to the door.
- First, we check for loose or hollow tiles and point out any we find.
- We rake out the old grout to an even depth, taking care of the tile edges.
- Dust and debris are vacuumed out of every joint.
- New grout is worked into the joints and cleaned off the tile faces.
- The corners and edges get new silicone, because grout there would crack.
Preparing for the visit
- Clear items away from the joints we’re working on
- Plan for the work area to be out of bounds to pets and children
- Tell us about any water getting in
Get a quote
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
Advice
Different surfaces, different methods
Wet rooms
Both the grout and the silicone in a wet room matter. We replace the grout and reseal the edges.
Bathroom floors
Floor grout takes foot traffic as well as water. It wears and darkens over time.
Signs you need regrouting in Mill Meads
Grout that was put in corners cracks as the bath or tray moves. They need flexible sealant, and when they aren’t, water gets in.
The problems people generally mention when they call include:
- Stained grout that cleaning will not shift
- Grout in a colour the owner wants to change
- Gaps where the shower grout has gone
- Kitchen splashback grout stained by grease
If you look after a building such as East London Science School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Before you book anyone
- What the cure time is
- What product goes in the joint
- What the quote includes, VAT included or not
- How the joint is cleaned and prepared
Why act early in Mill Meads
Cleaning products may brighten grout for a time, but mould that has got into grout generally comes back. New grout, with silicone in the corners, deals with the cause. Damp from a failed joint spreads quietly in older London brickwork and timber, and by the time it shows on a wall or ceiling in Mill Meads, the repair is bigger than the sealant job would have been.
A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- We never seal over old sealant
- Arbo and Everbuild products
- We leave the area clean and tidy
- Approved under the ARBOMaster scheme
Take a look at what affects the cost and what customers say.