Scottish Borders · Scotland
Regrouting in Clockmill
We cover Clockmill for raking out old, cracked or stained grout and regrouting tiled walls and floors. Old material cut out, joints cleaned and sealed neatly.
- Grout in corners that has cracked
- Kitchen splashback grout stained by grease
- Gaps where the shower grout has gone
How to look after the new joints
Looking after new joints is easy:
- Use a soft brush rather than a wire one
- Use a squeegee on the tiles after showering
- Do not use strong acidic cleaners on grout
- Get any tile that moves checked promptly
Before we leave, you’ll know when the shower can be used. Stick to that time, and go gently on the grout at first.
Grout that’s washing out of a shower shouldn’t be left. Each shower drives water into the open joints and it can end up in the wall or the ceiling below.
Regrouting in Clockmill, done properly
Changing the grout colour is a simple way to update tiles. You might go from white to grey or back again. Just mention the colour you’d like when you email us at info@mrmastic.co.uk. We work on tiled floors, bathroom floors and kitchen splashbacks, and people most often call us about corners filled with grout instead of silicone and floor grout that won’t come clean.
For a place like Clockmill, the job is the same as anywhere: everything old is cut out, the joints are cleaned and dried, and new sealant or grout goes in. The journey and access are simply planned in advance.
You get a one-year guarantee, the same in Clockmill as everywhere else we work.
- Location
- Clockmill (TD11)
- Region
- Scottish Borders
- Cover
- One year on every job
- Quotes
- A clear price before any work starts
- info@mrmastic.co.uk
- Updated
- 26 October 2026
What else we do in Clockmill
Elsewhere in the Scottish Borders
Regrouting in all 89 places in the Scottish Borders
All services in the Scottish Borders
All areas
All about regrouting
What the job involves on each surface
Bathroom floors
If floor grout keeps cracking, the floor may be moving. We look for loose tiles first.
Bathroom wall tiles
Splash areas around basins and baths stain first. We can do part of a wall or all of it.
Landlords, agents and businesses in Clockmill
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance that we can handle for you.
From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.
Questions from Clockmill
Do you cover smaller places like Clockmill?
Yes, Clockmill is covered. Our work covers the whole of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.
Do you work in hotels near Clockmill?
Yes, hotels and guest houses are among the places we work. Rooms can be done a few at a time, so the building stays open.
What should I tell you?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it does not work out, we can redo it.
Is resealing included with regrouting?
Normally we do both. Grout fills tile gaps and sealant handles the moving joints, so both are renewed and it’s all in the quote.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just make sure your landlord agrees.
Is it possible to regrout only the shower area?
Yes, we often do. Shower grout tends to go before the rest, so it’s often the only area that needs doing.
Where do you work from?
Our base is Crawley. Our area covers South East England, London and Scotland.
How the visit works
All our tools and materials come with us in the van, so there’s nothing for you to buy. Once we’ve agreed what’s being done, we protect the area and start. It normally takes anything from a few hours to a full day, depending on the area. For a place like Clockmill, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.
- First we agree what’s being done and flag any loose tiles.
- We remove the old grout carefully.
- The joints are cleaned out and vacuumed.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
How to prepare
- Let us know about earlier repairs to the joints
- Tell us if parking is tricky
- Mention any sign-in or site rules at work premises
Ask for a quote
For regrouting in Clockmill, send an email to info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.
Advice
When it is not the sealant
Some problems need a builder, plumber or other trade rather than us:
- Tiles that are loose or hollow behind
- Tiles that are chipped or split
- Failed tanking or waterproofing under the tiles
Not sure which it is? You can drop us a line at info@mrmastic.co.uk and we will tell you honestly.
Where we work in Clockmill
- Shower walls
- Bathroom floors
- Tiled floors
- Wet rooms
- Kitchen splashbacks
- Bathroom wall tiles
What affects the cost of regrouting
We quote each job individually. This is what makes a difference:
- The amount of work
- The old material and how stubborn it is
- The number of rooms or windows
- Whether the work is at height
Combining jobs into one visit is normally more efficient than separate visits, so it’s worth mentioning everything you’d like done. You’ll get one clear quote for the whole job.
What we need to know
Photos help, but a description is a good start. Try to tell us:
- Whether it has been sealed before
- Whether it’s a home or a business
- How we’d reach the joints
- Roughly how big the job is
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, email us at info@mrmastic.co.uk.
Bathrooms and kitchens in Clockmill
Private landlords in Scotland must be registered and meet the Repairing Standard, which covers keeping fixtures and fittings in a reasonable state of repair. Tired, leaking sealant is worth putting right before a new tenant moves in. Clockmill has hotels and guest accommodation nearby. Hotel bathrooms are part of our work as well as homes, and can be done room by room.
If you look after a building such as Berwickshire High School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. If you live in an older home near Old Parish Church of St Cuthbert, older homes can move a little, which is hard on rigid grout and tired sealant.
Clockmill is in the Scottish Borders. Clockmill gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. 89 places in the Scottish Borders are on our list. There’s also a page for Edinburgh, roughly 34 miles from Clockmill.
Here we cover the TD11 postcode area for regrouting. Other places close to Clockmill include Gavinton (1 mile south), Duns (1 mile east), Preston (3 miles north-east), Longformacus (5 miles north-west) and Swinton (6 miles south-east). Larger places within reach include Kelso (12 miles south), Eyemouth (13 miles north-east), Earlston (15 miles south-west), Lauder (15 miles west) and Chirnside (6 miles east).
Local landmarks in Clockmill
A little further out are Jim Clark Motorsport Museum (1 mile east) and Langton Castle (0.8 miles west). Not far away are Hule Moss and Duns Castle nature reserve.
Why act early in Clockmill
It’s tempting to fill a few cracks yourself, but the patches often do not match and the old grout carries on failing. Regrouting the whole area gives an even, lasting finish. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs, plus any working-time requirements on site. Call for a quick quote and we will explain what it covers.
Why us?
- An ARBOMaster approved applicator
- Neat joints and a tidy finish
- Quality sealants from Arbo and Everbuild
- Domestic, commercial and hotel work
Take a look at our cost guide or what customers say.