Argyll and Bute · Scotland
Mastic man in PA76
Our applicators cover all of the PA76 postcode district, which takes in Baile Mòr. Every joint is properly prepared, with a one-year guarantee.
Areas within PA76
Our services across PA76
- Window & door mastic
- Remedial sealant & repairs
- Regrouting
- Floor & skirting joints
- Fire-rated sealant
- External & façade joints
- Glazing & conservatory sealant
- New-build mastic & snagging
- Commercial & hotel sealant
- Sand mastic for sash & case windows
- Gutter, fascia & soffit sealing
- Bathroom & kitchen resealing
- All services
Let us know the job and your postcode and we’ll give you a clear price: email us at info@mrmastic.co.uk.
Districts next door
More in Argyll and Bute
Every town in Argyll and Bute
Areas we cover
Our bathroom resealing service in PA76
A fresh bead of silicone changes how a bathroom looks more than most people expect. Mouldy silicone makes even a new bathroom look neglected, and a clean white or clear joint fixes it quickly. It also seals the gaps that let water behind the bath. Typical jobs include lumpy, uneven sealant from a DIY attempt and water getting behind the bath panel, across basins & vanity units, shower trays & enclosures and baths.
When we arrive, we look over the joints with you first, so you know exactly what we are doing. Surfaces next to the work are protected before any work begins. The work usually takes a couple of hours for a single bath or shower.
- First the area is protected and every bit of old sealant removed, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- Once it’s dry, any bath is filled so the bead is laid with it at its heaviest.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
What you’ll pay
We do not show prices on the website, because the cost depends so much on the job itself. For a quick quote, please drop us a line at info@mrmastic.co.uk.
What you get with us
- A choice of colours where the product allows
- An ARBOMaster approved applicator
- Any old sealant cut out fully, not covered over
- Anti-fungal sanitary silicone in wet areas
Ask for a quote
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Landmarks near Baile Mòr
Typical jobs here are in homes near Iona Church, among other places. Nearby you’ll also find Iona Heritage Centre (less than half a mile south-east). For a walk, there’s Loch Poit na h-Ì and Càrn Buidhe.
Bathroom resealing across PA76: local notes
Across PA76, from Baile Mòr outwards, we see bathrooms and kitchens of every age. Sealant and grout wear out in all of them, whether it’s a family bathroom, a rented flat or a hotel en suite.
Scotland has its own building regulations, and homes here bring their own details: sash and case windows, harled walls and, in the towns and cities, tenement flats. PA76 is part of the area we cover across Scotland.
Baile Mòr: If you live in an older home near Iona Church, timber floors under older bathrooms flex, so joints need a sealant that moves with them. Around Baile Mòr, as everywhere, bathroom resealing is only as good as the preparation behind it.
How to look after the new joints
Once the sealant has cured, a few habits help it last:
- Run the extractor fan during and after every shower
- Move toiletries away from the joint
- Never pick at the silicone with a blade
- Use gentle cleaners on the silicone
Give the silicone time to cure before it gets wet, which is generally around 24 hours. Once it’s cured, wiping it down after use keeps it looking new.
Worktop joints fail quietly. Water gets behind the upstand and into the edge of a laminate worktop, where it can make the board swell. Resealing before that happens protects the worktop.
For landlords and businesses
For anyone letting property in or around PA76, several properties can go on one quote. Send us the addresses and the work at each.
Hotels need rooms back in use, so the work can be planned room by room. We’ve worked in hotels as well as homes and businesses.
Common problems we fix in PA76
Older sealant shrinks and hardens. In kitchens it often shrinks away from the back edge, leaving a thin gap where water and food collect. Hot pans and harsh cleaners do not help.
The problems people usually mention when they call include:
- Splits where the tray meets the wall
- Failed sealant on the screen profile
- Leaks into the floor or ceiling below
- Mouldy sealant that has gone black
Can I do it myself?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
The biggest DIY mistake is sealing over old sealant. Silicone does not stick to old silicone, so it peels away and traps moisture behind it. All the old material has to come out first.
How we quote for bathroom resealing
We quote each job individually. This is what makes a difference:
- Which sealant suits the joint
- The old material and how stubborn it is
- Whether there’s mould to deal with
- Access and height
What you pay reflects the work, not guesswork. That is why we ask a few questions first and give you a clear price before any work starts.
What we need to know
When you contact us, it’s useful to know:
- Where the job is, and your postcode
- Photos by email, if that is easy
- Whether it has been sealed before
- If it’s domestic, commercial or a hotel
We quote each job on its own, so start by telling us what you need. Simply email us at info@mrmastic.co.uk and describe the job, and pictures are welcome.
Questions from PA76
Do you work for hotels and businesses?
Yes. We’ve worked for hotels, offices and other businesses, and we’re fully insured.
How much does bathroom resealing cost in PA76?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. If you can, email a few pictures.
Do you remove the old sealant?
Yes, every time. New silicone does not stick to old silicone, so any old material comes out before anything new goes in.
Can you just seal over the old silicone?
No, and it’s one of the main reasons reseals fail. The old joint is stripped, cleaned and resealed from scratch.
What colours of sealant can you use?
You’re not limited to white: white, clear and colours to suit tiles and worktops. We’ll talk it through when we quote.
Will you leave a mess?
Not at all. We work neatly, protect the area around the joints and tidy up afterwards.