South Ayrshire · Scotland
New Build Mastic in Loans
Problem with your new-build sealant joints in Loans? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.
- Gaps opening as the house dries out and settles
- Frame joints opening as the plaster dries
- Messy sealant that spoils new finishes
New build mastic in Loans, done properly
Failed shower seals, gaps along the skirting and messy beads are common items on a new-home snagging list. If you’re still within the builder’s snagging or warranty period, tell them first and if that stalls, we can do it. We work on show homes, windows & doors and kitchens, and the jobs we see most are joints pulling apart as timber shrinks and leaking shower tray seals in a new home.
Many newer homes in Scotland are timber-framed and settle as they dry out, which shows as gaps at skirtings and floor joints. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we will sort it.
- Location
- Loans (KA10)
- Region
- South Ayrshire
- Guarantee
- A year, on every job
- Quotes
- A clear quote up front
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Surface by surface
Kitchens
Sink joints are wet all the time. A kitchen sealant goes in there, food-safe where it’s needed.
Bathrooms and en suites
Shower trays in new homes often move slightly in the first year. We reseal once the old bead is fully out with baths filled first.
When something else is needed
To be straight with you, there are a few things sealant will not fix:
- Structural cracks in walls or ceilings
- Baths and trays that move too much for sealant to cope with
- Leaking fittings rather than failed sealant
Not sure which it is? You can email us at info@mrmastic.co.uk and we will tell you honestly before you book.
Joints and surfaces we work on
- Bathrooms & en suites
- Windows & doors
- Skirting & floors
- Plot handovers
- Show homes
- Kitchens
Common problems we fix in Loans
Fresh sealant can be knocked or cut by trades finishing off. If it’s disturbed before curing, the joint can be left weak, and the problem shows up after you move in.
Signs it’s time to call us include:
- Cracks appearing as a new home settles
- Worktop and upstand sealant coming away
- New-build shower sealant that has already split
- Internal frame sealant that has split
In and around Loans, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
What your quote should include
- What happens if the job turns out different
- Which colour the sealant will be
- What the quote includes, VAT included or not
- Are they insured?
Why act early in Loans
DIY kits don’t solve the main problems with new-build sealant: grit, unprimed surfaces and old layers underneath. Cutting out, cleaning and priming are what make the difference. Out of town in Scotland, exposed walls take a lot of weather, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
What it costs depends on how much there is to do, how much old material has to come out and access to the work. We give a clear quote before we start, so you know where you stand.
What you get with us
- 180+ five-star Google reviews
- A 12-month guarantee on all work
- Colour picked to suit the job
- Sanitary silicone with an anti-fungal additive in wet areas
Loans questions
Do you work for landlords with property near Barassie station?
Yes, rental work is part of what we do. Just drop us a line at info@mrmastic.co.uk and tell us about the property, and we’ll give you a clear quote.
Will you come out to Loans?
Yes, Loans is covered. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Are you fully insured?
Yes. We’re fully insured for domestic and commercial work.
Will it make a mess?
Very little: the area around the joints is protected first, and we tidy up before we go.
What should I tell you?
A short description and the location, with pictures by email if possible. If we need more, we’ll ask.
When is the best time to reseal in a new build?
That depends on the joint. Failed seals in wet areas need doing now, while small cosmetic gaps can wait a while.
Will you just run a new bead over the existing one?
No. New silicone won’t bond to old silicone, so sealing over the top fails quickly. The old sealant always comes out first.
Do I need to be at home?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Joints and finishes in Loans homes
Loans is close to the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so any gaps are best picked up early. The west of Scotland is wetter than the east, which means plot mastic and the sealant in new homes has to cope with a lot of rain.
For new homes near Barassie station, it’s worth checking the sealant early, while snags are still fresh.
Loans is about 1 mile east of Troon, in South Ayrshire. If you need new build mastic in Loans, please drop us a line at info@mrmastic.co.uk for a quick quote. We cover South Ayrshire from our Crawley base. 52 places in South Ayrshire are on our list, large and small. Our Glasgow page covers work nearby.
Jobs for new build mastic in KA10 works the same way as everywhere else we cover. Streets in the area include Main Street, Craiksland Place and Kyle Crescent, and we cover them all. If you’re just outside Loans, we cover Collennan (1 mile north), Troon (1 mile west), Barassie (1 mile north-west), Dundonald (2 miles north-east) and Hansel Village (2 miles east). Further out, we also cover Ayr (7 miles south), Prestwick (4 miles south), Heathfield (5 miles south), Belmont (7 miles south), Forehill (7 miles south) and Maybole (14 miles south).
What’s near Loans
Locally, jobs take us to homes and businesses close to Harbour Road garden and the streets around them. The closest station to Loans is Barassie station, roughly 1.3 miles north-west. Other landmarks nearby include Crosbie Castle and the Fullarton estate (1.5 miles south-west) and Biggart Hospital (4.1 miles south). Green spaces nearby include Caprington Loch.
How it works
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for most snagging lists, longer for a run of plots, and the area is left clean. Outside jobs in Loans need a dry day, because sealant won’t bond to a wet joint, so external jobs may need to move if the day turns wet. Indoor work goes ahead whatever the weather.
- We start by going through the snagging items or plot schedule with you.
- The failed sealant is removed completely, with no layer left behind.
- Joints are vacuumed and cleaned of building dust.
- We prime where needed and apply a sealant suited to each joint.
- Each bead is tooled and the cure times explained.
How to prepare
- On commercial sites, let us know about site rules
- Let us know about stairs, lifts or work at height
- Keep children and pets away from the work area
How to get a quote
For a quick quote, get us on the phone, or email us if that is easier. Tell us about the joints that need doing and we’ll talk you through the work and give you a clear price.
Related advice
Also in Loans
Landlord and commercial work in Loans
We work for letting agents and landlords as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
Mouldy or split sealant often shows up at the end of a tenancy. Several properties can be quoted together.
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.