Highland · Scotland

Crown New Build Mastic

Problem with your new-build sealant joints in Crown? We remove the old material, prepare the joints and seal them properly.

  • Frame joints opening as the plaster dries
  • Plot mastic for developers ahead of handover
  • Smeared, uneven beads picked up at snagging

New build mastic near Crown

New build mastic in Crown

We never seal over a failed new-build bead. New silicone will not bond to old silicone, so it all comes out before we clean, dry and reseal. We work on kitchens, bathrooms & en suites and skirting & floors, and common reasons people get in touch are beads laid onto grit and dust from the build and messy sealant that spoils new finishes.

Many newer homes in Scotland are timber-framed and settle as they dry out, which shows as gaps at skirtings and floor joints. In older homes, timber floors move through the year too.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Silicone being applied where a shower enclosure meets beige wall tiles
Where
Crown (IV2, IV1, IV99)
Wider area
Highland
Guarantee
One year on every job
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026

Honest limits

A few problems are outside what sealant work can do:

  • Movement caused by a poorly fitted tray or bath
  • Settlement cracks that need a surveyor
  • Broken tiles or a split tray

If in doubt, send an email to info@mrmastic.co.uk and we’ll say what we think before booking.

Surfaces we seal

  • Plot handovers
  • Skirting & floors
  • Kitchens
  • Bathrooms & en suites
  • Show homes
  • Windows & doors

Should I try it myself first?

If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

Common problems we fix in Crown

The first winter with the heating on dries a new home quickly. Skirting, frames and worktops pull away slightly and cracks appear in the sealant.

Any of these means the joints need attention:

  • Sealant work across a run of new homes
  • Worktop and upstand sealant coming away
  • Shower seals failing in the first year or two
  • Cracked caulk along new skirting

If you’ve bought a new home near Inverness station, the sealant around baths, showers and frames is worth checking in the first year or two.

Comparing quotes

  • Whether VAT is included
  • What insurance they hold
  • How long to leave it before use
  • The length of the guarantee

Our hiring checklist

Different surfaces, different methods

Bathrooms and en suites

En suite seals are easy to miss on a snagging list until they leak. A proper reseal keeps water in the tray.

Windows and doors

Draughts around new frames are often a sealant gap. We look at the joints and reseal where needed.

For landlords and businesses

Whether it’s one flat or a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

We work for landlords and agents as well as householders. Sealant work between tenants keeps a property looking cared for.

Why it’s worth doing now in Crown

A failed shower or bath seal in a new home lets water into floors and walls that are still drying out. Resealing promptly protects the new finishes around it. In an older home around Crown, damp from a failed joint can get into timber and plaster.

Combining jobs into one visit is usually more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.

Why Crown clients choose us

  • A choice of colours where the product allows
  • Homes, businesses and hotels
  • Approved under the ARBOMaster scheme
  • Sealant colour chosen to suit

Take a look at what affects the cost or our reviews.

What we do, step by step

When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take a few hours for most snagging lists, longer for a run of plots. Around Crown, distance and access matter more than parking. Let us know how to find you and how to reach the joints, and the visit is planned around that.

  1. We go through the snagging list or plot schedule and agree the joints to do.
  2. The old bead comes out in full, with no layer left behind.
  3. We clean off dust from the build and prime the surfaces where the product needs it.
  4. A sealant chosen for each area goes in and is tooled smooth.
  5. Each area is checked and left with its cure time.

Before we arrive

  • Mention any parking rules near the property
  • Try not to wet indoor joints just before the visit
  • Let us know about earlier repairs to the joints

Get a quote

There’s no standard price list, because every job is different. Instead, we give you a clear price for your job. To get started, drop us a line at info@mrmastic.co.uk.

Ask for a quote

Read more

New build mastic in Crown: local notes

Crown is within about 1 mile of the coast. Plot mastic on new homes near the coast takes more weather than it would inland, so any gaps are best picked up early. Timber frame is common in newer Scottish homes, and as the frame dries and settles, skirting and sealant joints can open up.

Around Crown, as everywhere, new build mastic is only as good as the preparation behind it.

Crown is about 1 mile north-east of Inverness, in Highland. Anywhere in IV2, our applicators can take on new build mastic. We cover 253 towns and villages across Highland.

Our applicators cover all of IV2, IV1 and IV99 for new build mastic. New build mastic is available to properties on Islay Road, Union Road and Crown Road. We also cover Millburn (1 mile north), Inverness (1 mile south-west), Longman (1 mile north-west), Hilton (1 mile south) and Ballifeary (1 mile south-west). Within a short drive, we also cover Nairn (15 miles north-east), Cradlehall (3 miles east), Dingwall (12 miles north-west), Alness (15 miles north), Invergordon (15 miles north) and Muir of Ord (10 miles west). Island and remote addresses take a little more planning, so please mention your location when you drop us a line at info@mrmastic.co.uk.

Landmarks near Crown

In Crown, that means homes and buildings near Inshes Primary School, Cavell Gardens and Imperial Bar. For rail, the closest station is Inverness station, roughly 0.5 miles north-west. Well-known places in the area include Inverness Museum and Art Gallery (0.6 miles west) and Inverness Castle (0.6 miles west). Green spaces nearby include Tomnahurich.

Map of Crown © OpenStreetMap contributors

Common questions in Crown

Do you cover smaller places like Crown?

Yes, we do. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.

I let a flat near Inverness station. Can you help?

Yes, rental work is part of what we do. You can email us at info@mrmastic.co.uk with the address and a few details, and we will give you a fixed price before any work starts.

Do you have insurance?

Yes. Full insurance covers our work.

Will the old sealant be removed?

Always. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.

Can you quote for more than one area?

Yes. Just list everything you need and you’ll get one quote.

Do you hold any approvals?

Yes. Mr Mastic is an ARBOMaster approved applicator.

Do you guarantee your work?

Yes. Every job comes with our 12-month guarantee.

What colour sealant will you use?

That depends on what the joint meets: white or clear for most sanitary joints, colours for worktops, floors and frames. We will agree it with you first.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job