Scotland
New Build Mastic in Inverclyde
Wherever you are in Inverclyde, we can help with new build mastic. Clear quotes up front, and a one-year guarantee.
New build mastic across Inverclyde
Plot mastic for developers and snagging failed sealant in new homes. Pick your town below to see the details for your area, or call or email us for a quick quote.
Biggest towns in Inverclyde
What else we do in Inverclyde
- Sand mastic for sash & case windows
- Glazing & conservatory sealant
- Fire-rated sealant
- Commercial & hotel sealant
- External & façade joints
- Regrouting
- Remedial sealant & repairs
- Window & door mastic
- Bathroom & kitchen resealing
- Floor & skirting joints
- Gutter, fascia & soffit sealing
Postcode areas we cover
Our new build mastic service in Inverclyde
We never seal over a failed new-build bead. New silicone will not bond to old silicone, so the joint is cut out, cleaned, dried and resealed. We work on bathrooms & en suites, show homes and windows & doors, and the jobs we see most are gaps between new skirting and floors and worktop and upstand sealant coming away.
We keep the work tidy and contained to the joints we’re treating. The job normally takes a few hours in a single home, and we tell you how long to leave it before we go.
- We go through the snagging list or plot schedule and agree the joints to do.
- Failed or untidy sealant is cut out completely.
- We clean off dust from the build and prime the surfaces where the product needs it.
- We apply a sealant that suits each joint and tool it to a neat finish.
- We check every joint and tell you how long each needs to cure.
Pricing in Inverclyde
Combining jobs into one visit is usually more efficient than separate visits. We will give you a clear quote for the lot.
Why choose Mr Mastic
- Old sealant always removed completely
- Colour picked to suit the job
- Approved under the ARBOMaster scheme
- A 12-month guarantee on all work
How to get a quote
Need a quote? Please email us at info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Near you in Greenock
Typical jobs here are in homes near Watt Library, The James Watt pub and Wellington Academy and the streets around them. Greenock has its own railway station: Drumfrochar station. A little further out are McLean Museum and Art Gallery (0.6 miles north-east) and Oak Mall (0.7 miles north-east). Open spaces near Greenock include Lyle Hill.
New build mastic across Inverclyde: local notes
In Inverclyde, new build mastic work takes in new homes, older houses and commercial units, from Greenock, Port Glasgow and Gourock to the quieter places in between. The common thread is movement: every joint has to allow for it.
Homes in Scotland come with their own details: sash and case windows, harled walls and, in the towns and cities, tenement flats. We work across Scotland, including Inverclyde. Along the coast in Inverclyde, window and wall joints facing the sea take the brunt of the weather, and that’s where sealant generally gives up first. Good preparation and the right sealant help it cope.
Greenock: Around Greenock, as everywhere, new build mastic is only as good as the preparation behind it. For new homes near Drumfrochar station, it’s worth checking the sealant early, while snags are still fresh.
What happens if it’s left?
DIY kits don’t solve the main problems with new-build sealant: dust, no primer and old sealant left in the joint. Cutting out, cleaning and priming are what make the difference.
What your quote should include
- How hidden problems are handled
- How the colour is chosen
- The length of the guarantee
- Whether the sealant suits the joint
Aftercare tips
A little care helps the new joints last. Our advice:
- Check bath and shower seals every few months as the house settles
- Use the extractor fan every time you shower
- Don’t wait for the house to settle if water is getting through
- Clean sealant with mild detergent, not abrasives
Keep pictures of the joints and any snagging correspondence with your builder. It helps if anything else comes up during the warranty period.
Lifting sealant traps moisture and mould behind it. Resealing before mould gets in keeps the job straightforward.
How the job changes by surface
Show homes
We can refresh show-home sealant that has discoloured or been knocked. The old bead comes out and a clean new one goes in.
Plot handovers
Good preparation at handover saves snagging later. Dust from the build is removed first.
What affects the quote in Inverclyde
Call for a quick quote. What matters most is:
- The amount of work
- Whether old sealant or filler has to be cut out
- Access and height
- Any mould that needs treating
The cost depends on the amount of work, how hard the old material is to remove and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Helping us quote
To help us quote quickly, please include:
- A few photos by email, if you can
- Where the property is
- What the problem is, such as mould, gaps, leaks or cracking
- How we’d reach the joints
For new build mastic in Inverclyde, drop us a line at info@mrmastic.co.uk. A short description of the job and where it is helps us quote, and we will agree the price before any work begins.
What we are called out for in Inverclyde
Fresh sealant can be knocked or cut by trades finishing off. If it’s disturbed before curing, the joint can be left weak.
People usually contact us after spotting one of these:
- Gaps opening as the house dries out and settles
- Sealant that never bonded to the surface
- Cracked caulk along new skirting
- Gaps behind new kitchen upstands
Inverclyde: your questions answered
How long should I leave it?
Many sealants skin over quickly but take longer to cure fully. We will tell you how long to leave the joint before we leave.
Are you fully insured?
Yes. Full insurance covers our work.
Are you ARBOMaster approved?
Yes. Mr Mastic is an ARBOMaster approved applicator and we’re fully insured too.
Who should fix failed sealant in a new build?
If you’re still within the builder’s snagging or warranty period, report it to them first. If it isn’t sorted, or keeps failing, get in touch with us.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Why has my new-build shower seal failed already?
It’s common, and there are normally two reasons: the house moving as it dries, and sealant that never bonded properly. A proper reseal deals with both.
Can you do several jobs on one visit?
Yes. Tell us about everything you’d like done.