Isle of Wight · England
Gutter Sealing in Yaverland
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims for Yaverland, backed by a one-year guarantee. Ask us for a quote.
- Stop ends leaking at the end of a run
- Quick sealant fixes on gutters that didn’t last
- Internal damp traced to a gutter joint
Leave it or put it right?
A dripping stop end can soak the wall right through the wet months. Resealing it is a quick job before the damage spreads. Where a wall is exposed, as many are in small places like Yaverland, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why book with us
- Anti-fungal silicone where joints get wet
- Sealant colour chosen to suit
- Homes, businesses and hotels
- 20+ years of sealant experience
Take a look at our cost guide and our reviews.
Gutter sealing for homes and businesses in Yaverland
Across Yaverland, we reseal gutter joints, end caps and roofline trims. Single-storey and low gutters are simple to reach, and for higher work, tell us about access and we will confirm what’s needed. We work on uPVC fascias, gutter joints and garage door frames, and people most often call us about wet patches on the wall under a gutter joint and quick sealant fixes on gutters that didn’t last.
Older homes in small places like Yaverland may be stone, brick or timber-framed, often with later extensions. The joints where those materials meet are the weak points.
You are covered for a year from the day we finish. If there’s a problem with it, please call 0345 464 0079 or email us.
- Place
- Yaverland (PO36)
- Wider area
- Isle of Wight
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of gutter sealing
We don’t publish a price list, because jobs vary so much. What we look at:
- The type of sealant required
- When we can work, for business premises
- How much there is to do
- How easy the joints are to reach
The cost depends on the size of the job, how much old material has to come out and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
Asking for a quote
You don’t need to know the technical terms. Just tell us:
- What the problem is, such as mould, gaps, leaks or cracking
- Any previous sealing or DIY work
- The type of property
- Any access issues, like height or stairs
For a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. We will give you a clear quote before any work starts.
Surface by surface
Soffit joints
Open soffit joints let draughts in. We close them with a suitable sealant.
Gutter joints
A dripping joint does not always mean a failed gutter. Sealing the joint often stops it.
What we’re called out for in Yaverland
Roofline sealant ages in sun and rain. It hardens, shrinks and splits over time.
Look out for any of the following:
- Damp patches inside below a leaking gutter
- Water running down the wall below the gutter
- Drips from gutter joints and end caps
- Cracked sealant along roofline trims
For an older house near a landmark such as St John the Baptist Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Before you book anyone
- How the colour is chosen
- Is VAT in the price?
- What insurance they hold
- Which sealant they’ll use, and why
Gutter sealing in Yaverland: local notes
Yaverland is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
For landlords with property near Brading station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. Schools such as The Bay Church of England School are buildings too, and its movement joints, gutters and trims need looking after like any other building’s.
Yaverland is about 4 miles south of Ryde, in the Isle of Wight. Across the PO36 area, we can carry out gutter sealing at your property. Our area takes in 125 places across the Isle of Wight, large and small. For nearby work, see our Portsmouth page, about 10 miles away.
Here we cover the PO36 postcode area for gutter sealing. We cover properties on Meadow Way, Yaverland Close and Yaverland Road and the roads around them. Close by, we work in Yarbridge (1 mile north-west), Morton (1 mile north-west), Brading (1 mile north), Sandown (1 mile south-west) and Adgestone (1 mile north-west). Further out, we also cover Newport (8 miles west), Ryde (4 miles north), Cowes (10 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (9 miles north-west). If you’re somewhere remote, the job takes a little more planning, so mention it when you ask for a quote.
Near you in Yaverland
We work in homes and buildings around The Caulkheads pub and Sandown Bay Academy. Yaverland’s nearest station is Brading station, about 1 mile north. Nearby you’ll also find Sandown Castle (0.7 miles south-west) and Arthur Webster Memorial Hospital for Children (2.8 miles south-west). Open spaces near Yaverland include Bembridge Down and Brading Marshes RSPB reserve.
The process
Most of a good job is in the preparation, so that’s where we spend the time. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from an hour or two to a few hours. Somewhere like Yaverland needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We start by tracing the leak and checking the gutter itself is sound.
- The joint or trim is cleaned out and old sealant removed.
- The area is dried so the sealant can bond.
- We seal the joint with a sealant made for gutters and outdoor use.
- We look along the gutter and clear debris around the joints.
Preparing for the visit
- Move anything stored near the joints
- Plan for the work area to be out of bounds to pets and children
- Tell us if parking is tricky
Getting a quote
We quote each job on its own. Just ring 0345 464 0079 or email us with the details, and pictures are welcome.
Advice
What else we do in Yaverland
DIY sealant or a professional job?
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
Questions from Yaverland
Do you cover smaller places like Yaverland?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Brading station?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.
What information do you need?
The location, the problem and the rough size of the job. If you can, email a few photos.
Is it possible to stop a gutter joint dripping with sealant?
Yes, as long as the gutter itself is in good order. We clean and dry the joint before sealing so the sealant bonds.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Where do you work from?
Our base is in Crawley, and we work across South East England, London and Scotland.
Can sealant stop a sagging gutter leaking?
Sealing a sagging joint won’t last. The gutter needs refixing by a gutter installer, and we’ll tell you if that’s what we find.
Can you seal fascia and soffit joints?
Yes. Open joints along uPVC fascias and soffits can be sealed in a matching colour.
Aftercare tips
Simple care keeps the joints in good condition. Our advice:
- Rest ladders on the wall, not the gutter
- Look at the gutters while it’s raining
- Clear leaves and moss from the gutters
- Sort out a dripping joint early
Give the sealant the cure time we tell you and avoid disturbing it.
Once roofline sealant splits, water can get behind it. Resealing early protects the boards and the wall below.