Isle of Wight · England
Morton Gutter Sealing
Gutter sealing for Morton and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.
- Garage door frames letting rain in
- Open joints in fascias and soffits
- Internal damp traced to a gutter joint
Questions from Morton
Do you cover smaller places like Morton?
Yes, Morton is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Brading station. Can you help?
Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. You can phone 0345 464 0079 or email us with the details for a clear quote.
Is sealant enough for a gutter that has dropped?
Sealing a sagging joint won’t last. A gutter installer needs to refix it.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you seal over the old sealant?
No, because it fails. We remove every bit of old sealant first.
How long will you be here?
A typical job takes an hour or two for a few joints, longer for a full run. Your quote will say how long we expect yours to take.
Can you quote for more than one area?
Yes, we can. More than one area can be quoted together.
Can you work on commercial sites?
Yes. Commercial and hotel work is a large part of what we do, as well as homes. Working times can be discussed when we quote.
Gutter sealing in Morton, done properly
We don’t replace gutters, fascias or roofs. What sealant does is close joints and it cannot mend broken brackets, split sections or blocked downpipes. Common call-outs are for quick sealant fixes on gutters that didn’t last and garage door frames letting rain in, on uPVC fascias, garage door frames and soffit joints.
Older homes in small places like Morton may be stone, brick or timber-framed, often with later extensions. The joints where those materials meet are the weak points, and they need the right sealant at the right depth.
You are covered for a year from the day we finish. If anything is not right with it, phone 0345 464 0079 or drop us an email.
- Where
- Morton (PO36)
- Region
- Isle of Wight
- Cover
- A year, on every job
- Quote
- A clear price before work begins
- Call
- 0345 464 0079
- Updated
- 26 October 2026
DIY sealant or a professional job?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
What we cannot put right
We will always be straight with you, so here’s what sealant can’t fix:
- Guttering that needs replacing
- Fascias that need replacing
- Gutters that have dropped or pulled away
If you’re not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer.
Where we work in Morton
- Roofline trims
- uPVC fascias
- Garage door frames
- Gutter end caps
- Soffit joints
- Gutter joints
Why act early in Morton
New gutters cost far more than a few resealed joints. Where the gutter is in good order and only a joint leaks, resealing is the sensible fix. If it’s broken or sagging, a gutter installer needs to look. In a small place like Morton, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Ask us for a quote and we will go through it with you.
Why Morton clients choose us
- Every job guaranteed for a year
- Sanitary silicone with an anti-fungal additive in wet areas
- 4.9 on Google from 180+ five-star reviews
- 20+ years of sealant experience
See our cost guide and customer reviews.
What the job involves on each surface
uPVC fascias
We seal fascia joints, not replace the boards. Damaged boards need replacing by an installer.
Roofline trims
We reseal trim joints with an exterior sealant.
Outside joints around Morton
Morton is within about 1 mile of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Rented homes near Brading station change hands often, and a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. Schools such as Brading Church of England Controlled Primary School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing. If you live in an older home near St. Mary's Church, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Morton is about 1 mile north-east of Sandown, in the Isle of Wight. Homes, rented property, offices and hotels in Morton can book us for gutter sealing, old or new, large or small. The work is guaranteed for a year. 125 places in the Isle of Wight are on our list, from the larger towns to small villages. For nearby work, see our Portsmouth page (10 miles or so).
All of PO36 is within our area for gutter sealing. If you need gutter sealing at a property on New Road, Wrax Road and Morton Road or anywhere close by, our applicators can take on the job. Morton is on the A3055, so it’s easy for us to get to. Close by, we work in Yarbridge (1 mile north-east), Brading (1 mile north-east), Adgestone (1 mile west), Yaverland (1 mile south-east) and Sandown (1 mile south-west). Further out, we also cover Newport (7 miles west), Ryde (4 miles north), Cowes (9 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). If you’re somewhere remote, the job takes a little more planning, so let us know when you get in touch.
Near you in Morton
In Morton, that means homes and buildings near Sandown Bay Academy, The Bay Church of England School and The Bugle Inn, among other places. The nearest railway station is Brading station, roughly 0.6 miles north-east of the centre. Well-known places in the area include Sandown Castle (1.1 miles south) and Brading Waxworks (0.5 miles north). Green spaces nearby include Brading Marshes RSPB reserve and Brading Down.
Other services in Morton
Quotes for gutter sealing in Morton
Your quote is based on your job. We look at:
- The number of rooms or windows
- The number and length of the joints
- Working hours on commercial sites
- Whether the work is at height
There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or email us.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- Where the job is, and your postcode
- The problem you’ve noticed
- Photos by email, if that’s easy
- The rough size of the job
For gutter sealing in Morton, call 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and we’ll agree the price before any work begins.
Landlord and commercial work in Morton
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can be quoted together.
Hotels need rooms back in use, so we plan the work room by room. Hotel work is part of what we do, alongside homes and businesses.
The process
When we get to you, we check the joints match what you told us. If anything is different, we explain it before carrying on. Most jobs then take an hour or two for a few joints, longer for a full run. For a village or hamlet like Morton, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we trace the drip and check the gutter isn’t damaged.
- The old sealant and dirt are cleaned out of the joint.
- The joint is dried before sealing.
- A gutter sealant is applied to the joint.
- We check the run and clear debris near the joints.
How to prepare
- On commercial sites, let us know about site rules
- Let us know about earlier repairs to the joints
- Keep children and pets away from the work area
Get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job, and we will explain how we’d tackle it. Whenever you’re ready, ring 0345 464 0079 or drop us an email.