Isle of Wight · England
Glazing & conservatory sealant in Morton, Isle of Wight
Glazing silicone for conservatories, rooflights, glass panels and shower screens for homes and businesses in Morton and across the Isle of Wight. Fully insured, ARBOMaster approved and guaranteed for a year.
- A quick top-up bead that didn’t last
- Split or lifting silicone on glass
- Leaks where conservatory glass meets the frame
What we are called out for in Morton
Using a sealant not made for glass causes many failures. Some products don’t bond well to glass, and acetoxy types can attack some frame materials.
These are the problems we are asked about most:
- Silicone pulling away from the glass
- Water tracking down the inner face of the glass
- Leaking glazing joints on a rooflight
- Shower screens leaking along the wall or tray
If you let a flat or house near Brading station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.
Comparing quotes
- Is the old sealant removed completely?
- How much experience the applicator has
- What happens if they find a problem under the old sealant
- What product goes in the joint
How we handle glazing silicone in Morton
Our work covers conservatory joints, rooflights and glass panels plus shower screens and the bases of glass balustrades. Each joint is cut out, cleaned and resealed. We work on rooflights, glass-to-glass joints and glass-to-frame joints, and people most often call us about new silicone smeared over old sealant and mouldy sealant around glass panels.
Somewhere as small as Morton, older homes often have timber frames set in stone or brickwork. Older buildings like these don’t always suit modern silicone, and sometimes a traditional sand mastic is the better choice.
A 12-month guarantee comes with the work, just as it does everywhere we cover.
- Where
- Morton (PO36)
- Wider area
- Isle of Wight
- Cover
- 12 months on all our work
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
Honest limits
A few problems are outside what sealant work can do:
- A broken pane or roof panel
- Water coming through the roof rather than a sealant joint
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
If you’re not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer.
What we seal
- Glass-to-frame joints
- Conservatory frames
- Shower screens
- Glass balustrade bases
- Glass-to-glass joints
- Rooflights
DIY versus a professional finish
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
Glazing silicone in Morton: local notes
Morton is within about 1 mile of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on glazing joints and frame seals, especially on the side facing the sea. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
If you look after a building such as Brading Church of England Controlled Primary School, larger buildings have plenty of frames, and the mastic around each one ages. If you live in an older home near St. Mary's Church, the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Morton is about 1 mile north-east of Sandown, in the Isle of Wight. From the centre of Morton to the outskirts, we cover glazing silicone for every kind of property. 125 places in the Isle of Wight are on our list, from the larger towns to small villages. There’s also a page for Portsmouth, roughly 10 miles from Morton.
Here we cover the PO36 postcode area for glazing silicone. You will find streets such as New Road, Wrax Road and Morton Road. Being close to the A3055, Morton is simple for us to get to for glazing silicone. Other places close to Morton include Yarbridge (1 mile north-east), Brading (1 mile north-east), Adgestone (1 mile west), Yaverland (1 mile south-east) and Sandown (1 mile south-west). We also work in nearby towns such as Newport (7 miles west), Ryde (4 miles north), Cowes (9 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.
Landmarks near Morton
In Morton, that means homes and buildings near Sandown Bay Academy, The Bay Church of England School and The Bugle Inn, among other places. The nearest railway station is Brading station, roughly 0.6 miles north-east. Well-known places in the area include Sandown Castle (1.1 miles south) and Brading Waxworks (0.5 miles north). Open spaces near Morton include Brading Marshes RSPB reserve and Brading Down.
Aftercare tips
To keep the joints looking good and working properly:
- Act on drips or damp patches early
- Check the gutters above the glazing for debris
- Keep harsh solvents off the silicone
- Squeegee the shower screen after each use
Squeegee a shower screen after each shower and let the room air. That slows mould growth on the bead.
A small conservatory leak soon spreads. Water runs along frames and down walls so it’s best dealt with right away.
Morton questions
Do you cover smaller places like Morton?
Yes. Morton is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Can you help a landlord with a rental near Brading station?
Yes, we work for letting agents and landlords. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Will the old sealant be removed?
Yes. All of the old material is cut out and the joint cleaned.
Where do you work from?
Our base is Crawley. We work across South East England, London and Scotland.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Is it messy?
We keep the work tidy. Nearby surfaces are protected.
Do you fit new glass or sealed units?
No. A misted unit has failed inside and needs replacing by a glazier.
What sealant do you use?
We choose the sealant for the joint, not the other way round. Where it moves, gets wet or faces the weather makes a difference, and we’ll explain our choice.
What we do, step by step
A visit follows a simple pattern: we look at the joints together, protect the area around them, do the work and clear up. It normally takes a few hours, depending on how many joints need doing. In a small place like Morton, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We find where water is getting in and check whether it’s a sealant joint.
- Old silicone is cut away from the glass and frame without scratching either.
- We clean the joint with a solvent that suits the glass and frame.
- We apply a neutral-cure glazing silicone and tool it smooth.
- We look over every joint and, where we can, test it with water.
Getting ready for the visit
- Let us know about earlier repairs to the joints
- For business premises, tell us about site rules or sign-in
- Tell us if parking is tricky
Getting a quote
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Read more
More services for Morton
What affects the cost of glazing silicone
Call for a quick quote. The main things that affect it are:
- Whether the work is at height
- The size of the job
- Any working-time requirements on site
- The type of sealant required
There are no prices on our website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or email us.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- Any previous sealing or DIY work
- Where the property is
- The rough size of the job
- The type of property
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is.
How the job changes by surface
Conservatory frames
Frame-to-wall joints on a conservatory move with the weather. We reseal them with a sealant suited to the frame.
Rooflights
Rooflight leaks can come from the sealant or the roof. We find the cause first.