Isle of Wight · England
Fire Rated Sealant in Morton
Our applicators work in Morton on intumescent and fire-rated sealant around gaps, frames and service penetrations. Old sealant removed completely, joints prepared properly and every job guaranteed for a year.
- Seals cut through by electricians, plumbers or data installers
- New service routes left unsealed after building work
- Standard silicone or caulk in a fire-stopping gap
Commercial buildings in Morton
If you run a hotel, guest house or holiday let in a coastal place like Morton, busy months put washrooms and kitchens under pressure, so it’s worth checking the sealant before the busiest weeks. There are hotels and other places to stay in and around Morton. For hotels, a room-by-room programme keeps most rooms in use while the work goes on.
For buildings such as St. Mary's Church, older buildings that have had new heating or wiring often have service gaps worth checking. For landlords with property near Brading station, fire-rated sealant around pipes and cables through walls and floors needs making good whenever new services go through.
Morton is about 1 mile north-east of Sandown, in the Isle of Wight. For fire rated sealant in and around Morton, it’s easy to get a quote: please call 0345 464 0079 or email us. We cover the Isle of Wight from our Crawley base, Morton included. We cover 125 towns and villages across the Isle of Wight, large and small. Portsmouth is on our list too, around 10 miles away.
We work across PO36 for fire rated sealant. Whether your property is on New Road, Wrax Road and Morton Road or anywhere close by, our applicators can take on the job. With the A3055 close by, Morton is simple for us to get to. If you’re just outside Morton, we cover Yarbridge (1 mile north-east), Brading (1 mile north-east), Adgestone (1 mile west), Yaverland (1 mile south-east) and Sandown (1 mile south-west). Further out, we also cover Newport (7 miles west), Ryde (4 miles north), Cowes (9 miles north-west), Shanklin (3 miles south-west), Ventnor (6 miles south-west) and East Cowes (8 miles north-west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Near you in Morton
We work in homes and buildings around Sandown Bay Academy, The Bay Church of England School and The Bugle Inn. The nearest railway station is Brading station, roughly 0.6 miles north-east. Well-known places in the area include Sandown Castle (1.1 miles south) and Brading Waxworks (0.5 miles north). Not far away are Brading Marshes RSPB reserve and Brading Down.
How we handle fire rated sealant in Morton
We can work through a building room by room or floor by floor. That record is useful for your files and for whoever looks at the building next. We work on door frames, flats & HMOs and pipe & cable gaps, and people most often call us about ordinary sealant used where a fire-rated product was needed and gaps flagged on a fire risk assessment.
If you have holiday lets, a converted barn used for business or a community building near Morton, the washrooms, kitchens and any fire-rated joints need the same care as a big site.
There’s a 12-month guarantee on every job, large or small.
- Place
- Morton (PO36)
- Wider area
- Isle of Wight
- Cover
- 12 months on all our work
- Quote
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Aftercare tips
Once the sealant has cured, a few habits help it last:
- Check risers, ceiling voids and cupboards during building checks
- Never patch a fire seal with standard sealant
- Make resealing part of every contractor’s brief
- Store the list of sealed gaps with your building paperwork
Avoid covering a sealed gap with anything that is not part of the tested detail. Repairs should use a matching fire-rated product. We can tell you which product we used.
When you plan work that goes through walls or ceilings, plan the fire stopping too. Catching it then saves a separate visit later.
What happens on the day
There’s no need to move everything out, just the space around the work. Everything nearby is protected, and the work takes anything from a few hours to several days, depending on how many gaps there are for a typical job. Somewhere like Morton needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We go through the gaps on your list or survey and check each one’s size and substrate.
- Anything that isn’t fit for the job comes out, and the gap is cleaned.
- Backing or fill is fitted where the product’s tested detail calls for it.
- Fire-rated or intumescent sealant is applied to the right depth and tooled.
- Locations and products are noted so you have them on file.
Preparing for the visit
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
- Clear the area around the work
How to get a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job, and we’ll explain how we’d tackle it. When it suits you, phone 0345 464 0079 or send us an email.
Related advice
Common problems we fix in Morton
Lots of unsealed gaps appear long after the building was completed. Electricians, plumbers and data installers drill through walls and ceilings and the hole they leave doesn’t always get resealed.
The most common problems we see are:
- New service routes left unsealed after building work
- Gaps flagged on a fire risk assessment
- Ordinary sealant used where a fire-rated product was needed
- Old fire sealant that has split or come away
Managing a site like Brading Church of England Controlled Primary School? Then service openings in fire-resisting walls need checking after any refurbishment.
Questions to ask before you book
- Whether you can choose the colour
- What happens if the job turns out different
- Is the old sealant removed completely?
- What product goes in the joint
When it isn’t the sealant
A few problems are outside what sealant work can do:
- A wall that isn’t a fire-resisting element to begin with
- Doors that are not fire doors in the first place
- Fire risk assessments, which need a qualified assessor
If you are not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer before booking.
Surfaces we seal
- Door frames
- Service penetrations
- Linear gaps
- Pipe & cable gaps
- Flats & HMOs
- Plasterboard & masonry
What else we do in Morton
Landlords, agents and businesses in Morton
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
Housing providers, facilities teams and property managers book us too in Morton and across the Isle of Wight. We can quote a run of properties together, and we are fully insured.
What the job involves on each surface
Service penetrations
Different services need different details: metal pipes, cables and plastic pipes aren’t treated the same. We follow the manufacturer’s tested detail for each.
Linear gaps
Some linear gaps have to cope with movement as well as fire. We choose a product and depth that suit the gap and the movement, following the tested detail.
DIY versus a professional finish
If you are set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Morton: your questions answered
Do you cover smaller places like Morton?
Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Do you work in hotels near Morton?
Yes, hotels and guest houses are among the places we work. A room-by-room programme keeps most rooms in use while the work goes on.
Can I use normal mastic around a pipe through a fire wall?
No. Standard sealants are not made or tested to stop fire. If it’s been used, we remove it and use the right product.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status.
Where are you based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Can I add another job to the visit?
Yes, and it often makes sense. Doing several areas at once is usually more efficient.
Do you do fire sealant around door frames?
Yes. The joint between frame and wall is sealed with a fire-rated sealant. The door leaf and its hardware need a door specialist.
What do you need from me for a quote?
A short description and the location. We’ll ask anything else we need to know.