Isle of Wight · England
Gaskins Fire Rated Sealant
Fire rated sealant across Gaskins and nearby, with every bit of old sealant taken out first.
- Joints picked up in a fire-stopping survey
- Fire stopping disturbed by later work
- Gaps filled with a product that is not fire-rated
What happens if it’s left?
Waiting for the next refit can leave a gap open for years. On its own, sealing it now is a small job. In a small place like Gaskins, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, along with when we can work on site. Ask us for a quote and we will go through it with you.
Why book with us
- Arbo and Everbuild products
- Approved under the ARBOMaster scheme
- One-year guarantee on every job
- 4.9 on Google from 180+ five-star reviews
Read how sealant jobs are priced or our reviews.
About our fire rated sealant in Gaskins
A gap around a door frame, a linear joint at the head of a wall and a hole round a pipe are each sealed differently. We check the size and the substrate before choosing the product, then apply it to the depth its tested detail calls for. We’re often asked to deal with door frames with gaps between frame and wall and gaps flagged on a fire risk assessment, across door frames, linear gaps and service penetrations.
For a small place like Gaskins, the journey and timings are agreed in advance, so it can be fitted around guests, clients or events where possible.
We stand behind the work with a 12-month guarantee, so you’re not left on your own once the job is done.
- Place
- Gaskins (PO33, PO36)
- Wider area
- Isle of Wight
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Other services in Gaskins
Do you need fire rated sealant in Gaskins?
Sometimes the wrong product was used from the start: ordinary expanding foam, standard silicone or decorators’ caulk where a fire-rated seal was needed. It looks sealed, but it isn’t fire-rated.
Any of these means the joints need attention:
- Gaps left after a refit or conversion
- Seals cut through by electricians, plumbers or data installers
- Open holes round services passing through fire walls
- Old fire sealant that has split or come away
Community buildings like St Catherine-by-the-Green are part of the picture too: older buildings that have had new heating or wiring often have service gaps worth checking.
Before booking anyone
- Who turns up on the day
- What preparation is included
- How long the guarantee is
- Which sealant they’ll use, and why
Work for landlords, hotels and businesses
We also work for property managers and facilities teams. Several sites can be quoted together, and we are fully insured.
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Common questions in Gaskins
Will you come out to Gaskins?
Yes. Gaskins is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Gaskins in your area for fire rated sealant?
Yes, Gaskins is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or email us with a few details of the job.
Is standard sealant good enough for a fire gap?
No. Standard sealants are not made or tested to stop fire. If it’s been used, we remove it and use the right product.
Where do you work from?
Our base is in Crawley, and we work across South East England, London and Scotland.
What do you need from me for a quote?
A short description and the location, with pictures by email if possible. We will ask anything else we need to know.
Do you offer different sealant colours?
We help you choose a colour that suits, from white and clear to greys and other shades. The product needed can limit the range.
Are you fully insured?
Yes. Mr Mastic is fully insured, and we have been doing sealant work for more than 20 years.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Workplaces and buildings in Gaskins
For seaside hotels, guest houses and holiday lets around Gaskins, heavy use in the busy months is hard on washroom and kitchen sealant, and any building work there should leave fire-rated joints made good. In England, the Regulatory Reform (Fire Safety) Order 2005 requires a fire risk assessment for workplaces and for the common parts of blocks of flats, which is often where open fire-stopping gaps are first noticed. We work to the specification you’re given, installing the product to its tested details.
For site and facilities teams at buildings such as St Helens Primary School, gaps opened by contractors for new cabling are a common finding in schools and offices. For landlords with property near Brading station, any gap left by new services in shared walls should be closed with a fire-rated product.
Gaskins is about 3 miles south-east of Ryde, in the Isle of Wight. Jobs in Gaskins get the same care as everywhere else we work: old sealant removed completely, careful preparation and a 12-month guarantee. Gaskins is one of 125 places in the Isle of Wight we cover for fire rated sealant. There’s also a page for Portsmouth, about 8 miles away.
Jobs for fire rated sealant in PO33 and PO36 works the same way as everywhere else we cover. Neighbouring places we cover for fire rated sealant include St Helens (1 mile north-east), Brading (1 mile south-west), Yarbridge (2 miles south-west), Morton (2 miles south-west) and Yaverland (2 miles south). Further out, we also cover Newport (8 miles west), Ryde (3 miles north-west), Cowes (9 miles north-west), Sandown (3 miles south-west), Shanklin (5 miles south-west) and Ventnor (8 miles south-west). Remote and island addresses need a little more planning, so tell us where you are when you ask for a quote.
Near you in Gaskins
In Gaskins, that means homes and buildings near The Vine Inn. The closest station to Gaskins is Brading station, roughly 1.2 miles south-west of the centre. Well-known places in the area include Sandown Castle (2.7 miles south) and Lilliput Museum of Antique Dolls And Toys (1.2 miles south-west). Green spaces nearby include Brading Down and Brading Marshes RSPB reserve.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Construction that doesn’t provide fire resistance on its own
- Assessing a building’s fire safety
- Openings too large for sealant, which need batts, boards or another system
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Surfaces we seal
- Plasterboard & masonry
- Linear gaps
- Flats & HMOs
- Service penetrations
- Pipe & cable gaps
- Door frames
Surface by surface
Flats and HMOs
Conversions generally leave a mix of old and new service holes. We seal the ones on your specification with a tested product and the locations noted.
Door frames
We deal with the gap around the frame, not the door. Doors, seals and closers are for a door specialist, and we will say if we spot a problem with them.
How we quote for fire rated sealant
We quote each job individually. This is what makes a difference:
- The old material and how stubborn it is
- Which sealant suits the joint
- The size of the job
- Whether there’s mould to deal with
The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before we start, so you know where you stand.
Helping us quote
To make quoting easier, let us know:
- The problem you’ve noticed
- The type of property
- Whether it has been sealed before
- The rough size of the job
A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
How it works
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes from a few hours to a few days, depending on the number of gaps and the access. Somewhere as small as Gaskins, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We plan the order of work and access, floor by floor or flat by flat.
- We take out any damaged or unsuitable sealant.
- Dust and loose debris are cleaned from each gap.
- We apply and tool the sealant to the product’s tested detail.
- We record what was done and flag anything that needs a different system.
Preparing for the visit
- Tell us about any water getting in
- Let us know about parking restrictions
- Try not to wet indoor joints just before the visit
Getting a quote
Asking for a quote is easy: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll take it from there.